通过对这两种方法所求得的结果进行仿真比较，证明直接辨识算法可行，模型的精确性有明显改善。
Through the comparison of the two simulation results, it is proved that the direct identification arithmetic is feasible and the accuracy of the model is improved clearly.
为了简化计算，选择正交函数作为基函数，并以油藏开发仿真为例，验证了模型和算法的有效性。
In order to simplify the algorithm, orthogonal functions are selected as base functions, and the effectiveness of the model and the algorithm is proved by simulation of oil reservoir exploitation.
给出了半实物仿真系统的基本组成和工作原理，讨论了水下航行器运动的仿真模型和实时积分算法。
The basic organization and simulation principle of the system are presented, and the simulation model for the underwater vehicle and real-time integer algorithm are discussed.
利用粒子群的优化算法，建立侵彻子母弹最佳抛撒高度的求解模型，并进行了仿真计算。
By using Particle Swarm Optimization (PSO), a model was built up for calculating the optimum dispersion height of intrusive submunition dispenser, and mathematical simulation was carried out.
对于线性模型，本文提出了一种基于线性路径的骨干网算法，仿真实验表明该算法的系统生命期比平面模型的算法提高了12%左右。
For linear model, this paper proposes a linear path based backbone algorithm. Simulation results shows system lifetime of this algorithm is improved by 12% of algorithm of plane model.
本文提出将模型论、仿真算法和仿真可信度评估理论作为系统仿真学科的基础理论的观点。
In this paper, the author presented the viewpoint that System simulation is based on model theory, simulation algorithms and simulation credibility evaluation theory.
第四步，介绍了培训仿真流程系统模型和数据库设计、培训仿真流程实现算法、柔性培训仿真流程原型的设计以及系统的设计。
Fourthly, I will introduce the system model, design of database, arithmetic of training emulation flow, and the design of gentle training emulation process model and the system.
采用曲面的表面法矢建立了毛坯的几何模型，结合扫描体代数方程，实现了加工仿真和NC代码验证算法。
Surface normal vector technique is used to setup geometry models for blanks. Combined it with s AE, we implement algorithm for NC machining simulation and Verification.
采用了四阶龙格-库塔算法，将数学模型转换为可仿真的离散模型，并利用MATLAB7.0对其进行了计算机仿真。
The fourth order Runge-Kutta method is used to transform the mathematics model into discrete simulation model, using MATLAB7.0 simulation software to simulate its dynastic performance.
在仿真试验中用动态神经网络所得到的控制算法对模型的输出进行跟踪控制，从仿真结果图可以看出这种控制器能获得较好的控制效果。
Control parameter gotten by dynamic neural network is used to control the model's output in simulation. The result concludes that the controller can get better control result.
对处于扰动状态下的预分馏塔的仿真结果表明，该算法可以有效地解决一类多神经网络模型的在线参数辨识问题。
Simulation results of a disturbed pre-fractionator show that this algorithm can be used to solve on-line parameters-recognized problem of a kind of multi- neural networks model effectively.
将设计好的制导控制算法嵌入六自由度弹道模型中进行验证，仿真结果表明了此快速仿真架构的正确性和制导、控制方案的可行性。
The GNC algorithms designed are embedded in the trajectory model. The results show that the simulation structure is valid and the GNC schemes are feasible.
在此基础上建立了求取齿轮副传动误差和齿面接触点的数学模型，提出了分析齿轮传动误差和接触区域的仿真算法，并编制了相应的计算程序。
On the basis of it, the mathematical models of driving error and contact point are set up, then the emulation algorithm is put forward and the program is worked out.
本文对基于互协方差的航迹融合算法进行了仿真分析，并对航迹融合模型的稳定性进行了探讨。
The simulation and analysis on algorithm of multisensor track-to-track fusion is based on cross-variance functions, and analysis of the stability to model is presented.
基于人工神经网络BP算法的倒立摆小车实验仿真训练模型，其倒立摆BP网络为4输入3层结构。
The training model of test simulation for car of inverted pendulum based on BP algorithm of artificial neural networks (ANN) is a BP network that has 4-input and 3-layer structure.
结果表明，该仿真系统结构合理可靠，各子系统采用的数学模型和仿真算法正确可信。
The results show that the architecture of the system is reasonable and reliable, and the mathematics model and simulation algorithm of the sub-systems are also valid and practicable.
从齿轮传动的基本原理出发，系统地分析了多轴齿轮传动系统的动力学模型原理，提出了基于齿轮副接触算法的动力学仿真模型。
The gear transmission system dynamics model was analyzed according to the gear transmission principles and a dynamics method based on gear contact calculation was given.
文中最后选取了一个比较有代表性的模型，通过对其进行建模和编程，验证本文的复杂曲面仿真算法和误差分析方法。
At last, a representative model is selected in this paper, using the program of this model, validated the simulating method of complex surface and the error analysis method.
研究了自动变速车辆的换挡规律的算法，制定了车辆的动力性换挡规律和经济性换挡规律，建立了车辆动力学仿真模型。
In this paper, automatic gear shift laws with optimal dynamic property and fuel economy are given respectively, which are tested in dynamic simulation model of vehicle power train.
针对电力系统并行仿真算法中的分块对角加边模型提出了一种新的交替迭代解法。
A new alternate iteration method based on block bordered diagonal model for parallel computation in simulation of electric power system dynamics is presented in this paper.
应用晶粒长大理论建立材料降解的理论模型，实现了生物材料降解仿真算法以及过程模拟。
By applying crystals' growth theory to construct material degradation model, we realize the algorithm and process simulation on biological material degradation.
利用该采样仿真算法能极大地提高故障诊断的速度和准确度，这对因果图模型在工业在线故障诊断领域中的应用具有重要意义。
The simulating algorithm will improve the diagnosis speed and accuracy, which has an important significance for the application in industrial online fault diagnosis.
本文根据经济微观仿真模型ASPEN的定价机理，提出了一种自动学习算法。
In this paper, a self-learning algorithm is put forward based on pricing principle of ASPEN, a microsimulation model of the economy.
简化仿真模型将双向开关视为理想开关，仿真速度较快，用来验证控制算法的合理性；
The simplified simulation model would have considered bi-directional switches as ideal ones, and its simulated speed was faster, by which the reasonability of control algorithm has been verified;
计算机仿真结果表明，利用该模型算法可以发现拓扑图中关键节点，同时度量值均方差可以准确评估给定连通网络拓扑图的抗毁性能。
The simulation on PC shows that the algorithm can find the critical nodes in topology, and the mean square deviation can evaluate accurately the survivability for a given connected topology.
该模型及其仿真算法适用于牵引供电系统仿真器(TPS)的研究与开发。
The model and its algorithm can be applied to the research and development of the traction power simulator (TPS). The results testify the validity and the feasibility of TPS.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
应用推荐