介绍了重载列车仿真研究的基本方法、程序组成、实际应用和各种具体的仿真研究。
The fundamental method, program composition, actual application of the research of simulation on heavy haul trains and various specific simulation researches are described.
仿真研究表明本文提出的方法能够有效地缩小排队长度,从而达到减少车辆延误的目的。
Emulation study shows that the method put forward by the paper can shorten effectively the queueing length, so as to reach the purpose of decreasing vehicle delay.
分析了单模激光系统的混沌特性,并对单模激光系统的混沌同步与控制进行了仿真研究。
The chaotic characteristic of single mode laser system is analyzed. The simulation experiments of synchronizing and controlling chaos in single mode laser are studied.
理论分析和仿真研究表明,所提的方法是有效的并可保证闭环系统具有良好的重构性能。
Both the theoretical analysis and the computer simulation reveal that the presented scheme is effective and the closed - loop system has a good reconfiguration performance.
仿真研究表明:所论模糊励磁控制器可以提高发电机的电压控制精度和电力系统的稳定性。
The simulating studies indicate the proposed excitation controller can improve the accuracy of voltage control and strengthen the stability of electric power systems.
根据车辆动力学建立了引导系统的仿真模型,通过仿真研究了各主要因素对引导性能的影响。
This paper established a simulation model of guided system based on vehicle dynamics, with the effect of all main factors on guided performance investigated by simulation.
通过理论分析和严密的数学推导以及对算法实现的仿真研究,证明了该算法的正确性和可行性。
The accuracy and feasibility of the algorithm herein is proved through theoretical analysis and strict mathematic deduction and simulation studies performed on the algorithm.
通过对基于简化线性和非线性模型的自适应控制器的仿真研究,结果表明后者具有更好的收敛性。
Adaptive controllers based on simplified linear and nonlinear models are studied by simulation and the results show that the latter has better property of convergence.
通过仿真研究验证了该方法能明显地改善常规模糊控制和固定预测步长的灰色预测模糊控制效果。
Simulation results show the superiority of the proposed method over the conventional fuzzy controller and the grey model predictive fuzzy controller with fix predictive step size.
利用管道系统特性,建立软管的数学模型,对含软管的液压系统进行了准确方便的建模和仿真研究。
Using the systematic characteristic of the pipeline, this paper sets up the mathematical model of the hose and simulates the hydraulic system that includes the hoses accurately and conveniently.
在用自适应辨识观测器设计雷达伺服系统时,对于计算机的仿真研究及工程设计,该方法很有价值。
When the adaptive identification observer is utilized in a radar servo system, this method is of great value in computer simulation study and engineering design.
文中对带有自动驾驶仪飞机投弹的稳定性进行了分析,对其过程进行了仿真研究和控制律优化设计。
The paper analyses the launching missiles stability of aircraft with auto-flight system, and simulates the process of launching and optimizes the control law of the auto-flight system.
建立了冗余度机械臂协调操作的数学模型,利用该模型对两机器人抓持同一刚性物体进行了仿真研究。
The kinematical model for coordinating manipulators is constructed and research is done through simulation examples for two coordinating manipulators holding one object.
并且通过建立速度匹配传递对准的状态空间模型,对上述方案进行了仿真研究,证实了该方案的正确性。
And by establishing state roomage model of velocity matching transfer alignment made simulation and study to this scheme, confirmed the feasibility of this scheme.
装备战斗损伤仿真研究是BDAR中一项基础性研究内容,它对提高装备可靠性与维修性有着重要意义。
The research of battle damage simulation is one of the basic contents in BDAR, and is of great importance to improve the reliability and maintenance of the equipment.
对所给出的补偿方法进行了仿真研究,结果验证了单相statcom进行快速平衡化补偿的能力比较强。
It is proved by the simulation results of the proposed compensation method that the single phase STATCOM possesses the ability to carry out fast balancing compensation.
仿真研究表明,提出的算法在平均节点度和传输功率的效率方面均优于基于直接传输区域的拓扑控制算法。
Simulation results show that the proposed algorithm has advantages over the topology control algorithm based on the direct-transmission region in terms of average node degree and power efficiency.
给出了自适应模糊控制技术的控制规则集、知识库修正方法和控制策略,并进行了系统仿真研究和性能分析。
Provides the control rule sets, methods of revising knowledge base and control strategies and carries on simulation research and performance analysis for the system.
通过对多种启发式调度规则特性的全面仿真研究与分析,得出了各种规则与生产管理评价指标的影响度关系。
Through full simulation, studying and analysis of the characteristics of simple heuristic scheduling rules, I make sure each rule's influence degree for different evaluation measures.
本论文的工作主要有两个部分:长程超短基线定位系统的高精度定位算法仿真研究和系统信号处理软件设计。
The main work of this paper contain two parts of content, simulation researching on high precision position arithmetic for USBL and the signal processing software design.
仿真研究表明,该方法增大了群的生存时间,减少了群的消失数量,使得自组织网络管理工作更有效、更稳定。
The simulation results show that, our method makes the network management more efficient by increasing the cluster lifetime and decreasing the number of the disappeared clusters.
在分析现有天线扫描方案的基础上,提出了天线扫描动量补偿的仿真研究方法,为进一步的研究工作奠定基础。
This paper presents a momentum compensation simulation method about the antenna scan on the bas is of analyzing the antenna scan scheme that has been presented.
从整体上对数字控制逆变焊机系统进行了仿真研究,提出用受控源的方法实现了动态电弧负载模型与系统的连接。
A system simulation study was done for full digital welding inverter, and a method of connecting dynamic arc load model to the system with controlled source was presented.
本文以考虑配电网络综合负荷模型作为研究对象,采用数字仿真方法,对该负荷模型进行了较为深入的仿真研究。
Based on the comprehensive load model considering the distribution network as the research object, by digital simulation method, and the load model for an in-depth study of the simulation.
通过受电弓主动控制系统的设计和对其的仿真研究,理论上降低了弓网系统接触压力的波动,从而改善了受流质量。
The design of the pantograph's active control system and the study of the simulation results reduce the fluctuation of the contact force theoretically and thus improve the current collecting quality.
仿真研究表明:FNOSER算法可以实现静态电阻抗成像,且具有图像分辨率高、定位精确、成像速度快等特点。
The study results show that the FNOSER algorithm can obtain static image with a character of high space resolution, accurate orientation, fast imaging, and so on.
应用灰箱辨识软件对车辆系统的灰箱模型辨识进行了仿真研究和实验室试验验证,证明了所提出方案是可行和有效的。
Grey box model identification for railway cars system is simulated and tested in laboratory by grey box software tools, it is proved that the scheme is feasible and valid.
以里程计作为外部传感器,建立了运动状态下初始对准的数学模型,分析了系统状态的可观测性,并进行了仿真研究。
By selecting an odometer as the system's external sensor, the mathematical model for the alignment in the moving state is established and the observability of the system is analyzed.
以里程计作为外部传感器,建立了运动状态下初始对准的数学模型,分析了系统状态的可观测性,并进行了仿真研究。
By selecting an odometer as the system's external sensor, the mathematical model for the alignment in the moving state is established and the observability of the system is analyzed.
应用推荐