基于上面假定，可以采用二维模型完成下面的分析。
With the above assumptions made, adequate analysis can be performed using a two-dimensional model.
介绍堆石体的几种本构模型，用二维有限元方法分析了混凝土面板堆石坝的应力变形特性。
The article introduces several structural models, as well as analyzes the stress deformation feature of concrete face rockfill dam using two dimension finite element method.
通过所建二维细观损伤模型分析了真空热循环次数对材料线膨胀系数曲线影响的原因。
The effect of vacuum thermal cycles on the linear expansion coefficient profile was analyzed using a proposed two-dimensional model of micro-damage.
在分析锻造用钢锭凝固过程特点的基础上，建立起钢锭铸造凝固的二维非稳态温度场计算数学模型，并编制程序。
A two-dimensional unsteady temperature field calculation mathematical model has been set up by analyzing ingot solidification process and the program has been developed.
应用形式渐近分析和拉普拉斯变换，我们从三维线性粘弹性方程组得到二维线性粘弹性弯壳的数学模型。
By applying formal asymptotic analysis and Laplace transformation, we obtain two-dimensional model system of linearly viscoelastic "flexural" shell from three-dimensional equations.
分析了降雨条件下地表水入渗的过程，提出了降雨条件下非饱和渗流的二维数学模型及边界条件。
The infiltration process of the water on the surface is analysized under rainfall conditions, the two-dimensional mathematical model and its boundary conditions are presented.
本文首先建立二维对称结构模型，用于不锈钢电阻点焊预压接触分析。
In this dissertation, a two-dimensional symmetric model was built for contact preloading analysis of resistance spot welding of stainless steel.
高温超导电动机(HTS)的理论模型由二维电磁场分析软件完成。
A theoretical model of high temperature super-conducting (HTS) motor was presented by two-dimensional electromagnetic field analysis.
目的：建立X线头颅侧位定位片硬组织形态二维有限元分析模型。
Objeclive:To establish a two dimensional finite element analysis model for hard tissue morphology on lateral cephalometric X ray film.
以小方坯二维非稳态传热模型为工具，分析过热度和二冷配水制度对连铸坯内部质量的影响。
A two - dimension unsteady heat transfer model has been used to analyse the influence of superheat and secondary cooling water distribution on the internal quality of billet.
提出了二维随机地震动输入实用模型，详细论述了重力坝结构随机地震动力响应的分析方法。
A practical model for earthquake movement input is proposed and the method for random seismic analysis of gravity dam is discussed.
所建立的地下水垂向剖面的二维水量水质模型，对典型剖面中地下水的硝态氮污染进行了模拟和分析。
Two-dimension groundwater quantity and quality model in the vertical profile is made to carry out the simulation and analysis of nitrate-N pollution of the groundwater in the typical profile.
在全面系统分析了某公司钢锭热送热装系统热过程传热机理的基础上，建立了钢锭冷却、加热过程二维传热数学模型。
The two dimensions mathematical model for the hot transferring and charging process of ingot system has been introduced in detail on the basis of the heat transfer theory in this paper.
借助于量纲分析及螺旋弹簧变形机理的二维模型，直接推导出螺旋弹簧的变形公式与劲度系数。
The spiral spring deformation formula and coefficient of stiffness are directly derived by aiding dimensional analysis and 2d model of spiral spring deformation mechanism.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
采用二维稳态混合岸边排放模型分析，对南通狼山水厂扩建工程的取水水源地水质进行预测。
A two-dimensional mixed steady-state model of side discharge is applied to the prediction of water quality for the water source area of the Langshan waterworks in Nantong City.
主要介绍一个二维无截获栅控电子枪计算机模拟计算程序SHMG，及其关键数值分析模型和实验分析结果。
A two-dimension simulation code SHMG for the nonintercepting gridded electron gun design is presented in this paper, the numerical analysis model and the experimental results are also described.
在分析轮廓测量仪测量原理的基础上，建立了二维轮廓测量系统的数学模型，构造了轮廓测量仪的硬件结构。
On the basis of analyzing the hardware structures and measuring principle of profiles measuring instrument, the mathematical model of 2D profiles measuring system is set up.
设计了较为通用的、与模型无关的虚拟环境漫游引擎，并分析了其中的相机控制、碰撞检测和二维地图控制等技术。
Roam engine, which is all-purpose and independent of model, of virtual environment is designed. Camera control, collision detecting and planar map control are discussed.
采用拟均相二维模型，对乙烯环氧化制环氧乙烷工业反应器的床层导热性能进行了模拟与分析。
The heat transport of catalyst bed in industrial reactor for epoxidation of ethylene to epoxy ethane has been simulated and analyzed by pseudo-homogeneous two-dimensional model.
该文在充分分析WWW缓冲模型的基础上提出了实时二维兴趣模型。
Based on analyzing the WWW Cache model, we bring forward a real time two-dimensional interest model.
验证性因素分析的模型比较结果支持乐观悲观二维结构；
The result of confirmatory factor analysis supported the two-dimension structure of optimism-pessimism.
针对非线性离散动态大系统最优控制问题，在二维系统理论的基础上，对一种基于模型求解实际问题最优解的递阶算法作了分析。
Based on two -dimensional system theory, an analysis of a hierarchical optimal control algorithm for discrete nonlinear large - scale system is made.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
根据模型试验和二维、三维非线性分析结果，提出了新的拱坝孔口结构配筋公式。
A new formula for the calculation of reinforcing bars of the orifice is proposed, based on experimental and two and three dimensional analysis.
通过建立二维水沙数学模型，计算分析对河道水位、流场及河床冲淤的影响。
Through the establishment of two-dimensional mathematical model of flow and sediment, calculate and analyse the effects on river water level, flow field and riverbed erosion and deposition.
为消除二维汽车碰撞模型的病态性，利用矩阵扰动理论分析了模型病态性的实质。
Matrix perturbation theory was applied to analyzing the ill-conditioned two-dimensional vehicle collision model.
依据大变形理论和虚功原理对高速切削过程进行分析，建立了基于拉格朗日描述的有限元控制方程并采用二维有限元模型进行模拟。
Large deformation theory and virtual work principle were applied to analyses high - speed machining process, the finite element governing equation was approached based on Lagrangian description.
为提取舰船噪声听觉特征，应用被动长波模型对舰船噪声进行了分析，得到噪声信号的二维时空分布。
A passive long wave cochlea model is applied to extract audial feature of naval vessel radiation noise.
给出了考虑近邻耦合和次近邻耦合下的二维纳米波导阵列的波耦合方程，并且对三波导模型与四波导模型进行了数值的分析。
The coupled-mode equations for two-dimension nanoscale waveguide arrays are presented by considering the couplings between adjacent guides and sub-adjacent guides.
应用推荐