以激光测径仪为测量手段，通过其RS232串行通信接口发送数据。
The POF's diameter is measured by using laser diameter gauge and the data of the diameter is sent through its RS232 serial communication interface.
单片机实时完成量化控制。实验中通过串行通信接口输出编码系统的控制结果。
The single chip processor accomplishes quantify control in real time, the coding system's controlling results is outputted through the serial interface port.
分析了网络协议测试仪的串行通信接口功能，设计了一种可编程多协议串行接口电路。
The function of serial communication port in protocol tester was analyzed and a programmable multi-protocol serial communication interface circuit was designed.
数据显示部分用液晶显示模块以节省电池的耗电量，显示器与单片机的接口为串行通信接口。
Data show USES LCD module in order to save battery power and the interface of display and microcontroller is serial communication interface.
采用自顶向下的设计方法，用原理图和VHDL语言这两种输入对串行通信接口芯片进行设计。
The serial communication interface chip design was realized by application of schematic diagram and VHDL language.
流量变送器同时具备RS- 485串行通信接口，所有的参数设定均通过计算机软件来实现。
In addition, the flow transducer has a RS-485 serial communication interfaces, the parameter can be set by computer.
串行通信接口技术以其硬件设计简单、控制方便、成本低廉、传输距离远等优点在工程中广泛使用。
The serial communication interface has many merits such as simple design hardware, more convenient control, lower cost, far transmit distance and etc.
简要介绍了数字信号处理器TMS320LF2407A的串行通信接口模块及其串行通信接口电路。
This paper introduces the serial communication interface(SCI) module and the interface circuit of TMS320LF2407A.
本文阐述了主从式多机通讯的原理，提出了一种基于RS-422串行通信接口的方案和软件设计方法。
This paper describes the principle of multicomputer communication, and also the hardware and software implementation method based on RS-422 bus is given.
本文介绍了一个基于串行通信接口的虚拟仪器在医疗仪器方面的应用，本系统主要用于胎儿心电信号监测。
This paper introduces the application of a virtual instrument based on serial communication interface on medical device aiming for monitoring the fetus heart electric signal.
该方法简单快捷，易于实现，设计的模块紧凑小巧，可以作为串行通信接口的标准模块接入到用户的各种设计中。
The module is compact and smart, which can be used as a standard module in many kinds of design.
介绍了TMS320F240串行通信接口模块的特点及构成，并结合一个电机控制系统对串行通信接口的实际应用进行了说明。
This article introduces serial communication interface module(SCI)of TMS320F240. It also combines with an example of motor control system to explain practical application of SCI module.
原理性地介绍了各模块的实现方法，重点讨论了视频信号的存储、DSP程序的引导装载、异步串行通信接口的扩展等关键性问题。
The implementing of each module is introduced in principle. Some key problems are discussed with emphasis, such as video signal storing, DSP boot loading, asynchronous serial interface extending etc.
利用CPLD芯片的大容量、可编程特性，设计了具有缓存功能的高速异步串行通信接口芯片，以满足日益提高的快速串行通信要求。
Making use of large inner capacity and programmable resource of a CPLD chip, a high speed UART with buffer bas been designed to meet communication requirement.
单片机是将运算器、存储器、定时器、模数转换器和串行通信接口等集成在一个芯片上的小型计算机系统，它可以被嵌入到各种自动控制器和智能电子产品中。
Microcontroller is a small computer system that integrates ALU, memory, timer, ADC, UART, etc in one chip. it can be embedded into many kinds of controllers and intelligent electronic products.
这个寄存器定义了将用于数据通信的物理串行接口。
This register defines the physical serial interface which will be used for data communications.
由于大多数串行接口配置已经预先确定的，这是极为少见，有必要修改的通信功能列在了下面。
Since most serial interface configurations are already predefined, it is extremely seldom that there is a need to modify the communication functions listed below.
在集散控制系统设计中，经常会涉及到利用计算机串行接口进行数据通信。
The data communication through computer's serial interface is often involved in the design of distributing control system.
同时给出了应用双通道串行通信控制器(SCC)实现AM 79101与51单片机接口电路和应用程序设计。
Also, it provides the application of serial communication controller (SCC) which realizes the interface circuit linking AM79101 and 51mcu, and its programs.
该方法对于实时时钟器件串行接口通信程序的设计具有一定的借鉴作用。
It is helpful to the designer of serial interface communication program of the real time clock device.
详细介绍了光发送、光接收电路和单片机与微机的串行通信控制接口。
Transmitting and receiving circuits and serial communication and control interface between PC and microcontroller are described in detail.
串行数据通信在网络传输、背板连接和I/O接口等领域应用非常广泛。
Serial data communication has gained wide application in network transmission, backplane transceiver and I/O interface.
首先介绍了串行通信控制器85c30，给出了85c30接口电路的设计。
The serial communication controller-85C30 is introduced firstly. The design of 85c30 interface circuit can be found in this part.
本文介绍的电流环与RS- 232接口的方法大大提高了串行通信的距离和抗干扰能力。
The method of current transmitter interfacing with RS-232 in this article enormously advances the ability of serial communication and anti-disturbance.
为解决TMS320C6711在通信接口控制能力方面存在的缺陷，提出了一种基于TL16C550C实现TMS320C6711的异步串行通信的新方案。
This paper introduces a new resolving plan of the realization of TMS320C6711's UART communication based on TL16C550C.
SPI接口技术是一种高速，高效的串行接口技术，因而SPI设备在数据通信中应用十分方便。
The Serial peripheral Interface is a sort of technology with high speed and efficiency, which makes the SPI device convenient in data communication.
串行接口作为一种应用较早的数据通信接口，由于其自身实现容易等诸多特性，现在已经在工业控制等诸多领域得到了广泛的应用。
Serial port, early applied communications port, has been widely using in various fields as the industrial control and so on, just due to its special features of its easy realization.
它是一种可以同时处理计算机与具有USB接口的多种外设之间通信的电缆总线，USB已成为目前PC标准的通用串行总线。
It is a kind of cable bus which can process the communications between computer and peripheral equipments. USB is a general serial bus with PC standard.
该接口卡FPGA芯片内部VHDL程序含：ISA总线与FPGA接口、串行异步通信发送及接收模块。
The VHDL program embedded in the FPGA chip includes: interface combine ISA bus and FPGA, serial asynchronous communication module for transmitting and receiving.
该接口卡FPGA芯片内部VHDL程序含：ISA总线与FPGA接口、串行异步通信发送及接收模块。
The VHDL program embedded in the FPGA chip includes: interface combine ISA bus and FPGA, serial asynchronous communication module for transmitting and receiving.
应用推荐