MIDI控制器与合成器通过电线相连接，利用异步串行接口可以在不同设备间传送命令。
MIDI controllers and synthesizers are connected using cables that allow the commands to be sent between devices using an asynchronous serial interface.
使用每个封装背面的串行口设置每个控制器的IP地址。
Set the IP address of each controller using the serial port at the back of each enclosure.
像串行端口一样，计算机上每一个usb端口都由US b控制器指定了一个惟一的标识数字(端口id)。
Like a serial port, each USB port on a computer is assigned a unique identification number (port id) by the USB controller.
第4章显示系统部分介绍了液晶屏控制器SED 1335的工作原理。第5章通信系统部分介绍了串行通信方式和USB通信方式。
Chapter 4 Display system tells us the working theory of LCD screen controller SED1335. Chapter5-Communication introduces serial communication and USB communication.
同时给出了应用双通道串行通信控制器(SCC)实现AM 79101与51单片机接口电路和应用程序设计。
Also, it provides the application of serial communication controller (SCC) which realizes the interface circuit linking AM79101 and 51mcu, and its programs.
单个微控制器通过spi兼容的串行接口控制整组电池监视器，该微控制器也是至主CAN总线的网关。
A single microcontroller controls the entire stack of battery monitors via the SPI-compatible serial interface, and it also is the gateway to the main CAN bus.
该系统应用了MCS - 51系列的单片机，研制出通讯控制器和加油控制机，主机通过串行通信协议来对加油进行控制和监测。
The system makes use of MCS-51 single chip to design communication controller and oiling controller. Host computer inspects and controls oiling process through serial communication protocol.
单片机是将运算器、存储器、定时器、模数转换器和串行通信接口等集成在一个芯片上的小型计算机系统，它可以被嵌入到各种自动控制器和智能电子产品中。
Microcontroller is a small computer system that integrates ALU, memory, timer, ADC, UART, etc in one chip. it can be embedded into many kinds of controllers and intelligent electronic products.
本文介绍了PC机与基于80c196 KB的中央空调数字控制器的串行通信程序。
The article introduce PC computer and base on 80c196kb central air conditioner digital controller's serial communication program.
本文介绍了串行时钟芯片DS1302的功能和工作原理，并给出ds1302在灌溉控制器中与AT 89 C51单片机的接口电路设计。
This paper introduces the functions and work principles of serial clock chip DS1302, the design of interface circuit with AT89C51 single -chip microcomputer in the spray irrigation controller.
针对这一问题，提出了利用可编程计算机控制器(PCC)控制磁滞测功机实现串行通信加载的方法，并设计了一新型负载特性模拟实验系统。
Aimed at this problem, a method of serial communication loading on HAD which is controlled by PCC (programmable computer controller) was proposed, and a novel experimental system was designed.
介绍了MKS压力控制系统的组成、651c控制器的通信命令参数、串行通信协议宏的构造方法。
The composition of MKS pressure control system, the communication commands and parameters of 651c controller and the method on building serial communication protocol macro are all introduced.
介绍上位机与欧姆龙V600系列RFID控制器串行通信连接方式、通信命令和通信数据帧格式。
The communication link way, communication commands and communication data structure between host computer and OMRON V600 Series RFID controller are introduced.
从PLL输出串行信号到控制器。
Outputs serial data transferred from the PLL to the controller.
首先介绍了串行通信控制器85c30，给出了85c30接口电路的设计。
The serial communication controller-85C30 is introduced firstly. The design of 85c30 interface circuit can be found in this part.
本文采用ARM处理器技术、嵌入式实时操作系统技术和通用串行总线(usb)技术来完成TCSC实验系统控制器前置单元的实际开发。
This paper interprets the means of the development of the preset unit of TCSC Test Controller with ARM microprocessor, embedded real time operating system and the USB technique.
该接口也可以用于和其他控制器的快速通讯(同步串行)。
This interface can be also be used for a fast communication (synchronous serial) with other controllers.
现场总线是，提供一个有效的数字串行数据交换中的一个或多个控制器和现场设备的数量数字网络。
Field buses are digital networks that provide an efficient digital serial data exchange among one or more controllers and a number of field devices.
本文介绍了LN82 5 30串行通讯控制器的主要功能，版图设计，制造工艺。
This paper introduces the main functions, layout design and technology of LN82530 Serial Communications Controller(SCC).
接口是数字控制器与伺服驱动器间的串行实时通信总线。
SERCOS (SErial Real-time Communication System) is the serial real-time communication fieldbus between digital controller and servo-driver.
介绍了串行快擦写存储器25045功能特点、工作原理以及25045在包装机控制器中的应用。
The function, feature, principles of operation of Serial E2PROM 25045 with application in packer is introduced in this paper, the software is programmed and debugged.
本程序是本人自写的基于ST7920液晶控制器的串行LCD驱动程序。
The program is written based on my self-ST7920 LCD controller serial LCD driver.
最后论述了PC机和DB1000控制器之间串行通信的主要流程以及串行通信功能的具体实现。
At last the fundamental procedures of serial communication protocols between a PC and a DB1000 controller and the realization of serial communication function are discussed.
输出数据通过串行或并行端口从输出寄存器中存取，这可实现与现代微控制器和数字信号处理器的轻松、高速接口。
The output data is accessed from the output register through a serial or parallel port. This offers easy, high speed interfacing to modern microcontrollers and digital signal processors.
数字串行接口可配置用于三线式操作，并且与微控制器和数字信号处理器兼容。
The digital serial interface can be configured for three wire operation and is compatible with microcontrollers and digital signal processors.
利用多通道缓存串行口mcbsp实现SPI总线方式的数据采集，并采用两个DMA控制器实现了数据的实时传输和存储。
The use of multi-channel buffered serial port MCBSP is to achieve SPI bus (mode of) data collection, and the real-time data transmission and storage is achieved by the use of two DMA controllers.
利用多通道缓存串行口mcbsp实现SPI总线方式的数据采集，并采用两个DMA控制器实现了数据的实时传输和存储。
The use of multi-channel buffered serial port MCBSP is to achieve SPI bus (mode of) data collection, and the real-time data transmission and storage is achieved by the use of two DMA controllers.
应用推荐