阀杆和填料密封装置同样采用不锈钢,具有耐腐蚀性能。
The stem and packing gland are also stainless steel for corrosion protection.
阀杆应该是以镀镉钢合金或316不锈钢作为标准配置。备选的阀杆材料可以根据要求提供,例如,钛,不锈钢,等等。
The shaft shall be cadmium-plated steel alloy or 316 stainless steel as standard equipment. Optional shaft materials shall be available on request, i. e. , titanium, stainless steel, etc.
温润303不锈钢活塞杆。
结合了不锈钢和钨的杆头。
方法:采用不锈钢金属杆制成推结器应用于腔镜手术中,即可用于内圈套扎,又能用于腔内缝合腔外打结。
Methods: The self-made knot pusher made of stainless steel can be used to ligate inner ring and suture incorporeal knot extracorporeal.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
这种阀门应该是黄铜阀体,不锈钢阀杆和弹簧。
Valve shall have a brass body and stainless steel stem and spring.
杆和填料密封装置同样采用不锈钢,具有耐腐蚀性能。
The valve axis adopt stainless steel, it has good abradability and anti-causticity.
阀体?阀盖?阀杆:不锈钢。
杆(12)可由任何理想的金属材料如不锈钢或镍钛合金形成。
The rod (12) may be formed of any desirable metallic material, for example stainless steel or a nickel titanium alloy.
阀杆应该是400系列不锈钢,不能将阀杆暴露在蝶板紧固件上。
Stem should be 400 series stainless steel, can not stem exposed to the butterfly plate fasteners.
铝合金伸缩杆,快速结合夹头,不锈钢十二头组合工具。
Telescopic aluminum alloy handle, stainless heads. The heads can be changed quite easily and quickly.
配置有高强度烤漆钢板水箱,SUS304不锈钢活塞杆及双头均可活动的高压管。
Equipped with the steel water tank which is of high strength baking finish, stainless steel plunger (SUS304) and pressure pipe with two moveable ends.
阀杆采用不锈钢,有良好的抗腐蚀性,抗擦伤和耐磨性能。
The valve axis adopt stainless steel, it has good abradability and anti-causticity.
坚固耐用的不锈钢闸板,经久耐用的填料,不锈钢阀杆,耐腐蚀轭架轴套,重型坚固的上部结构。
Rugged stainless steel gate, long-life packing, stainless steel stem, corrosion resistant yoke sleeve, and heavy duty superstructure.
主杆及灯具用材可根据客户需要选择不锈钢,优质钢板或者铝压铸件。
The main rod and the lamps can be based on customer needs timber choice of stainless steel, high-quality steel or aluminum die-casting.
杆头后端的不锈钢配重把重量分成三份,并分布在打推杆的不同角落,成功取得极高的惯性力矩。
STAINLESS STEEL BACKWEIGHT triangulates weight at the corners of the putter for an extremely high moment of inertia.
阀杆材质,力求不锈钢阀杆(2cr13),大口径阀门也应是不锈钢嵌包的阀杆。
Stem material, and strive to stainless steel stem (2cr13), large diameter valves also should be embedded in the package of stainless steel valve stem.
那么不锈钢活塞杆在完成加工后,还需要电镀吗?
So stainless steel piston rod after finishing processing, still need to electroplating?
也许大多数人都不知道,在正常情况下,不锈钢活塞杆都是需要电镀的。
Perhaps most people do not know, under normal circumstances, the stainless steel piston rod is required to electroplating.
在不锈钢活塞杆完成电镀后,还需要对镀层的质量、尺寸等进行全方面的检查。
After the stainless steel piston rod is complete, it is necessary to inspect the quality and size of the coating.
总的来说,不锈钢活塞杆的电镀,一般都需要采用至少3次的镀铬。
In general, stainless steel piston rod plating, generally require the use of at least 3 times the chromium plating.
铸青铜阀体和连接端口,防吹出硅青铜阀杆或316不锈钢球体和阀杆为选配件(66阀内件)。
Cast bronze body and end piece, blowout proof silicon bronze stem or 316 stainless steel ball and stem are optional (66 trim).
阀杆材料是316不锈钢或其它与阀体相同的材料,由制造商选择。
Stem material is SS 316 or other material equivalent to body at manufacturers option…
这种厚煤层钻孔机2000是不锈钢结构,钻头第一内部腿架的活塞杆和钻孔机支架都是不锈钢的。
The high seam drill 2000 is stainless steel construction and the cylinder rods of the 1st inner legs of the stinger and drill leg are stainless steel.
这种厚煤层钻孔机2000是不锈钢结构,钻头第一内部腿架的活塞杆和钻孔机支架都是不锈钢的。
The high seam drill 2000 is stainless steel construction and the cylinder rods of the 1st inner legs of the stinger and drill leg are stainless steel.
应用推荐