提出一种连续振动悬臂梁瞬时三维形貌的测量方法。
A method for instantaneous three-dimensional profile measurement of a continually vibrating cantilever beam is proposed.
用原子力显微镜（AFM）研究了剪切带的三维形貌。
Three-dimension pattern of shear bands was investigated using atom force microscopy(AFM).
使用酸蚀法成功揭示了铝镇静钢中夹杂物的三维形貌和成分。
The 3dimensional morphology and composition of inclusions in a Alkilled steel were successfully revealed using the method of partial acid extraction.
文中列举了实测结果并将轮廓参数与三维形貌参数进行了比较。
Two-dimensional profileparameters of surface roughness are compared with three-dimensional parameters…
提出了采用二元光学元件(BOE)进行三维形貌测量的新方法。
A novel approach by using binary optical elements (BOE) of 3d measurement is presented.
依据白光干涉理论，研制了垂直扫描白光干涉表面三维形貌测量仪。
Based on the white-light interference, a vertical scanning white-light interfering profilometer was designed.
结论小尺度三维形貌测试系统可以精确测量牙唇面的微观纹理特征。
Conclusions The microscopic 3D morphology testing system is an effective instrument for measuring the surface morphology of human incisors accurately.
本文介绍采用触针式轮廓仪与通用微型机相连的表面三维形貌测量系统。
In this paper, a three-dimensional measuring system for surface asperities is described, in which a microcomputer is interfaced to a stylus profilometer.
提出一种基于相位追踪和光线追迹算法测量水中物体三维形貌的新方法。
A new method based on phase tracking algorithm and ray tracing algorithm is proposed for measuring the three-dimensional (3-d) shape of object in water.
傅里叶变换轮廓术和相移法是投影栅法测物体三维形貌的两种重要方法。
Fourier transform profilometry and Phase shifting are two important methods in 3-d measurement of body.
光纤探针作为三维形貌测量技术的传感器，具有非接触、高精度等优点。
As a method of acquisition sensor, optical fiber probe has many advantages, such as noncontact, high accuracy.
分析在光栅投影三维形貌测量中，用于对变形光栅像解调的低通滤波器的性能。
In 3-d profilometry based on structured light projection, the choice of low-pass filter to be used in the deformed pattern demodulation is crucial.
模拟的薄膜的三维形貌显示，在薄膜的表面存在着柱状结构，这与实验是相符的。
The simulated images of the film display a column structures, agreeing well with the experimental results of our group and other researchers.
该系统对于解决大型构件三维形貌的在线高精度检测问题具有较高工程应用价值。
The vision system is of great engineering value in large 3d non-contact online measurement with high accuracy.
为了实现强反射表面三维形貌的光学非接触测量，提出一种改进的投影栅相位法。
An improved non-contact optical measuring method, projected fringe profilometry, is proposed to realize the 3-d structure measurement of high reflective surfaces.
基于激光线扫描和力传感器原理设计了可以同时测量足部负荷和三维形貌的扫描仪。
A foot scanner was developed using laser-line scanning with mechanical sensors to simultaneously measure foot loads and 3-d foot shapes.
为了实现长、细管道内表面三维形貌检测，基于光学三角原理研制了一种新型检测器。
For inspecting the 3d shape and appearance of the inner surface of long and tiny pipe, a new type of sensor was proposed based on the principle of optical triangulation.
构建了一种应用结构光三维视觉检测技术对微小型构件内表面进行三维形貌检测的系统。
A 3d shape inspection system for inside surface of microminiature workpiece based on structured light vision is presented.
移相干涉技术(PSI)是计量测试特别是三维形貌测量中高精度、高灵敏度的测量方法。
Phase shifting interferometry (PSI) is a high precise and sensitivity method in testing technology, especially in three-dimensions profile measurement.
实验结果表明本文采用的光栅投影式物体表面三维形貌测量方法能够获得比较满意的结果。
It is proved that this measurement method for three-dimensional shape of object surface with grating projection presented in this dissertation can obtain good results.
标志点定位是三维形貌测量的关键技术之一，其精度在很大程度上决定着系统的测量精度。
Target location is a crucial part of 3d shape measurement, because it determines the measuring precision of system to a great extent.
三维形貌测量技术已广泛应用于机器视觉、智能机器人控制、工业检测、生物医学等方面。
Optical 3-d profilometry has been widely used for machine vision, intelligent robots control, industry monitoring, biomedicine, etc.
三维重建程序包括重建三维形貌图、坐标轴的绘制、用不同颜色表示高度，并加上灯光技术。
The three dimensions reconstruction program includes the reconstruction facial look image of three dimensions, mark the axis, use the different color to mean high degree, and plus light technique.
设计了由投影光源、CCD摄像机、图像采集卡和计算机等组成的三维形貌测量系统硬件装置；
The hardware in this measurement system of three-dimensional profilometry that consists of projecting light, CCD camera, image card and computer is designed.
用三维形貌仪测量工件的表面粗糙度，并对数值进行分析，结果表明磨牙冠的加工符合设计要求。
The surface roughness of workpiece was measured with 3d Profiler. The test results show that the surface roughness is consistent with design requirements.
物体表面三维形貌测量在逆向工程、机器视觉、在线产品检测以及医疗诊断等领域的应用日益广泛。
Three-dimensional shape measurement of object surface is now widely applied in different areas, such as reverse engineering, computer vision, online product inspection and medical diagnosis.
AFM较SE M能更细微地分辩损伤保护作用后引起的细胞膜表面三维形貌改变并可以做出定量分析。
AFM is better in distinguishing the three-dimension surfaces in neuron membrane after injury and protection than SEM.
在阐述叠加莫尔方法测量物体三维形貌基本原理的基础上，导出正弦光栅照射法等高莫尔条纹检测的数学模型。
On the base of expatiating the theory of object 3-d topography measurement with the overlapping moir? Approach, this paper derives the mathematic model for obtaining the contouring moir? Fringe.
建立了一个基于二进制编码结构光的三维形貌测量系统，推导了测量系统的物象关系式，并对测量系统进行了标定。
In order to measure the shape of three-dimensional objects, a non-contact system based on binary-code light projection method was developed.
建立了一个基于二进制编码结构光的三维形貌测量系统，推导了测量系统的物象关系式，并对测量系统进行了标定。
In order to measure the shape of three-dimensional objects, a non-contact system based on binary-code light projection method was developed.
应用推荐