通过万能板完成电路制作，进一步验证理论设计的正确性。
Then complete the circuit through universal board to further verify the correctness of the theoretical design.
据《新科学家》报道，巴西的研究人员已经设计出一项可以对修正的牛顿引力理论（MOND）进行验证的实验。
Researchers in Brazil have devised an experiment that could put the modified Newtonian dynamics (MOND) to the test, New Scientist reports.
静态验证和契约式设计理论大部分属于确定性理论的范畴。
Static verification and design by contract relay on theorems that are mostly based on deterministic approach.
文中给出了系统试验的试验环境、结果和分析，通过试验研究验证了系统理论设计的正确性。
The system's experimental environments, results and analyses were given, and by these experiments, it was proved that the theory of system designing was reasonable.
在从参考模型取状态MRAC方案的基础上，提出了混合自适应设计方法。文中给出详细的理论推导和仿真验证。
This paper presents a mixed self adaptive design method by taking the state MRAC scheme from a reference model. It gives a detailed theoretical derivation and simulation proof.
这个方法旨在通过step-by-step的设计来使你的想法得到有效表达，他的理论是基于大量的研究结果，并在很多大公司例如微软，埃克森-美孚，金佰利，易趣，摩托罗拉等得到验证。
It is based on extensive empirical research and has been pilot tested among leading corporations, including Microsoft, Exxon-Mobil, Kimberly-Clark, eBay, and Motorola.
分析了装货口盖成形工艺性，并进行了理论计算和模拟验证，由此制定了该工件的成形工艺、模具设计方案。
The porthole cover forming technology has been analysed and theoretical calculation and simulation verification have been done hence scheme of forming technology and die design done.
最后，文中采用个案分析的形式，对前述理论进行了应用验证，试图实现将设计的环境会计制度纳入实务应用领域的目标。
In the last chapter, the aim of the case study is to do some practical research on the above-mentioned theories, and to realize the goal of putting the above-designed EAS into practice application.
结果表明将理论分析与仿真技术相结合，是复杂曲面设计和数控加工刀位验证的一种有效途径。
The results indicate that it's an effective method for complicate surface design and NC tool position verification to combine theory analysis and simulation technology.
为了既能验证动态步行的理论结果，又能满足经济性的要求，本文设计并实现了一种基于总线型伺服电机的平面无脚双足机器人THR-I。
To verify the theoretical results of dynamic walking and satisfy the economy requirements, this paper designs and implements a planar footless biped robot THR-I based on bus servo motor.
通过分析级进模工序排样设计中的模糊性准则，利用模糊综合评判理论建立了对排样方案进行优化数学模型，并通过了事例验证。
By analyzing the fuzzy regulation for design of strip layout on progressive die, a optimum model has been set up based on the theory of fuzzy multi-factorial evaluation, which has been verified.
在理论分析和实验室实验以及现场验证的基础上，对设计、选择实用的超声传感器的研究作了介绍。
On the basis of the theoretic analysis and the experiment in laboratory and the spot verification, the research on the design and choice of practical supersonic sensor is introduced.
设计模型试验模拟渗压作用下淤填粘土的固结过程并对本文建立的理论模型和求解结果进行验证。
A model test was designed to simulate the consolidation process of warping soil, the validity of theoretical equation and the solution methods presented in this study.
沉降值相同时，桩-网复合地基比普通复合地基桩间距明显要大。验证了疏桩理论的设计思想。
With the same settlement, the pile distance of pile - net composite foundation is longer than normal composite foundation's.
本文给出了平场输入和输出edg的设计方法，并利用标量衍射理论对设计的结果进行模拟，验证了平场输出EDG具有很好的分波效果。
The scalar diffraction theory is used to verify the design and the numerical results show that the designed EDG has a good performance.
为了验证理论分析，设计了射频调制法测试介质膜滤波器群速度延时的实验装置。
To validate the theoretical analysis, a test system for group velocity delay was set up based on RF modulation.
研究了机载计算机系统验证测试理论，设计了一种自动测试设备。
This paper presents the validation testing theory of an airborne computer system and a Automatic test Equipment (ATE).
通过对样机测试结果的分析，归纳了RE -GMM致动器的一般设计方法，并验证了部分理论分析结果。
With the analysis of the testing result of sample, the design means of RE-GMM actuator was induced, which validates the theory analysis result.
设定了便于广泛实际操作使用的应用公式，并用实际的例子来验证立体裁剪—平面设计是一种行之有效的服装结构设计理论和方法。
And the applied formulae for extensively-practicing operation have been set up, which proves to be, with actual samples, a systematic and practical garment structural designing theory and approach.
制造和质量保证的第二层是在设计过程中。测试的设计是在理论进行了验证。
The manufacture and quality assurance are the next layer in the design process. Testing the design is where the theory is validated.
用实验验证复合材料壳体设计理论在天然气汽车气瓶设计中的正确性。
The. Correctness of composite materials shell design theory in cylinders for compressed natural gas vehicles is tested and verified through experiment.
给出了电路元件的设计公式和必须满足的条件，最后用实验证实了理论分析的正确。
The formula and the necessary condition for component design in the circuit are given. Finally, the correctness of theoretical analysis is verified through experiments.
利用该理论和算法建立了常见几何特征模型的基因编码和简单零件的基因编码，并通过CATIA5R8验证了多特征零件设计算法。
Based on such algorithm, we finally build the gene coding of general geometry feature and simple parts, and its algorithm is validated in CATIA5R8 platform.
结合视频压缩的理论以及IP核设计中对于仿真验证的要求，本文设计了视频压缩IP核FPGA仿真验证平台。
According to the theory in video compression as well as the simulation and verification requirement in IP core designing, the FPGA based IP core simulation platform is developed.
通过对二次群光接收机噪声性能的测量，比较了各种设计方案，验证了理论分析的正确性。
By measuring the receiver's noise performance of second order multiplex, various design schemes are compared and the correctness of the theoretical analysis is verified.
除了具有直观易见的特点之外，图文法在计算机上的精确建模和验证能力，为设计可视化语言提供了一个坚实的理论基础。
In addition to an intuitive appearance, graph grammars provide a well-established foundation for defining visual languages with the power of precise modeling and verification on computers.
本文首先对场板混合终端结构的优化设计进行了解析研究，提出了一套完整的设计理论，然后通过实验验证了此理论的正确性。
We first analytically study the optimal design of the mixed termination structure to present a complete set of design theory and then verify the theory by experiment.
本文通过研究可靠性保障的相关理论与技术和对通信协议软件的可靠性设计开发与验证的工程实践，提出了解决该问题的一些思路。
This article put forward some ideas that can solve that problem through the research of software reliability of communication protocol and relevant theory and technology.
实验结果一方面验证了理论分析的正确性，另一方面为下一步设计和研究放电电源提供了的依据。
The experimental results validated the validity of theoretical analyses and proposed a foundation to devising and studying the high frequency discharge power supplies for ozonizer.
实验结果一方面验证了理论分析的正确性，另一方面为下一步设计和研究放电电源提供了的依据。
The experimental results validated the validity of theoretical analyses and proposed a foundation to devising and studying the high frequency discharge power supplies for ozonizer.
应用推荐