介绍了杆式手操作真空负荷开关的研究。
A study of the rod type manual operated vacuum switch (RMVS) is introduced.
真空负荷开关单元采用环氧树脂固封绝缘。
The vacuum load switch unit is fixedly sealed and isolated by adopting epoxy resin.
本实用新型属于手车,尤其属于压气式负荷开关手车。
The utility model belongs to a handcart, particularly belonging to pneumatic load switch handcart.
本发明特指一种可实现在负荷开关出线侧安装四根电缆的电力电缆分接箱。
The invention particularly relates to a power cable distribution box capable of realizing arrangement of four cables on the outgoing line side of a load switch.
介绍了一种新型带有主、辅电路的真空负荷开关,它具有低截流、高转移电流。
This paper introduces a new vacuum load - breaking switch with main and auxiliary circuit, which is of lower current chopping level, higher transferring current.
负荷开关可实现免维护,组合电器可配用系列撞针式熔断器,熔断器更换安全方便。
Load switch can achieve maintenance-free, combination units can be equipped with a series of hit the pin fuses, fuse replacement safe and convenient.
变电站包括各类设备:变压器、断路器、负荷开关、母线、电流互感器、电压互感器等。
Transformer substation including each kind of equipment: transformer, circuit breaker, load switch, generatrix, current transformer, voltage transformer and so on.
机组可在断路器或负荷开关打开时,采用发电机升压变压器作为一种非本电厂电源来起动。
The unit can be started with the breaker or switch opened using the generator step-up transformer as a source of off-site power.
其次对于高压负荷开关及低压馈电开关部分存在的问题,则通过应用新型开关设备来解决。
Secondly, for some problems in high voltage switches and low voltage feed switches, new switching equipment is used to resolve the problem.
本环网柜配用电手,电动弹簧机构来操作负荷开关,接地开关和隔离开关配用手动操作机构。
The cabinet is equipped with electric hand ring, electric spring mechanism to operate the load switch, grounding switch and isolating switch with manual operating mechanism.
文章介绍了一种新型SF_6气体绝缘环网柜及三工位负荷开关的设计原理、结构、功能和应用范围。
This paper presents the design principle, structure, function and application range tor a new SF6 gas insulation ring-network cabinet and three-position load switchgears.
介绍了内昆线六盘水枢纽接触网负荷开关监控系统,并结合该系统给出了其安装调试的方法及注意要点。
Introduces the load-break switch monitor system of OCS in Liupanshui railway conjunction, offers methods and precautions for its installation and commissioning.
提高了接通和分断能力,动热稳定性好,适于频繁操作,是FB - 6高压负荷开关的更新换代产品。
Enhance the connecting and breaking capability, and fine moving and thermal stability, suitable for frequent operation, it is the new generation instead of FB-6 HV load switch.
从杆式手操作真空负荷开关主要性能的测试和计算指出,它非常适用于今后电力系统容量不断增长的市场需求。
By testing and calculating, the key properties of RMVS show that with growing requirements of power system capacity there are very promising prospects in the future market.
U 1 B的是一个施密特触发器,电池电压比较稳定的其他部分相同的参考,但另一个目的:它控制的负荷开关q3。
U1B is a Schmitt trigger that compares the battery voltage to the same stable reference of the other section, but for another purpose: it controls the load switch Q3.
配套相应的真空负荷开关可用于电力、金、山、工等部门的配电系统作控制和保护、别适合投切恶性负载和需频繁操作的场所。
Mating corresponding vacuum load switch is for electric power, metallurgy, mine, chemical controlling and protecting, it is suitable for location that has bad load and frequent operation.
负荷电流由调节器通过半导体开关元件直接控制。
The load current is handled directly by the controller through semiconductor switching devices .
开关位置指示灯:显示负荷连接至哪一种源。
Switch-Position Pilot Lights: Indicate source to which load is connected.
集中供冷系统仿真数学模型的主要特点是压缩机可以根据蒸发器总负荷大小选择性开关不同的档位,相应的输入输出参数也随之改变。
And the capacities of compressor could be selected by on-off switch along with the change of burthen of evaporator, which is a main characteristic of the central refrigeration system model.
配电线路开关配电线路开关是给连接在主配电设备上的负荷提供过载和短路保护的装置。
Distribution circuit breaker a distribution circuit breaker is a device used for overload and short current protection of loads connected to a main distribution device.
并安装了超载保护,即保证电机及油泵负荷的压力开关。
And installed the overload protection, namely to ensure that motor and pump load pressure switch.
操作器转换选择开关:有及无负荷转移的条件下都可以选择操作。
Exerciser transfer Selector Switch: Permits selection of exercise with and without load transfer.
然而在配电等级,联络开关用来开合同一变电站中不同变压器上的馈线或馈线段,或切换到邻近变电站以进行变电站变压器的负荷管理。
However, at the distribution level, 'tie switches are used to switch feeders or feeder sections between transformers in the same station, or to adjacent substations for substation transformer load.
有载分接开关(OLTC)的调节特性和负荷特性对电力系统电压稳定性具有极大的影响。
Both regulating characteristics of on-load tap changer (OLTC) and load characteristics greatly impact power system voltage stability.
算例分析表明,此改进算法可以充分发挥此类特殊隔离开关的操作灵活性,从而能够选出负荷比率最高的优化运行方案。
The example in the paper shows that the improved algorithm can fully exert the agility of the special switch and get the best solution to operation.
随着吐哈油田的进一步勘探开发,油田开关站周边负荷快速增长。
With the further exploration and exploit of Tuha oil field, the power load around the oil field's switch station increases quickly.
对较小的单相负荷可采用由微型接触器构成的双电源单相切换开关。
For comparatively smaller single-phase load, the duplicate supply single-phase transfer switch made of miniature contactors can be selected.
对较小的单相负荷可采用由微型接触器构成的双电源单相切换开关。
For comparatively smaller single-phase load, the duplicate supply single-phase transfer switch made of miniature contactors can be selected.
应用推荐