等温淬火法可以确定所有相的析出温度。
However, the precipitation temperature of all phases can determine by isothermal quenching method.
对球铁凸轮轴的等温淬火工艺进行了分析。
The isothermal quenching process of the ductile iron camshaft was analyzed.
尤其适用于薄钢片工件、弹簧夹类等温淬火。
Especially is suitable for the thin stalloy workpiece and class of pinchcock isothermal quenching.
研究石墨直径对等温淬火球铁(adi)水脆化的影响。
The effect of graphite nodule diameter on the water embrittlement of austempered ductile irons (ADI) was investigated.
等温淬火球铁(adi)对工程界来说是一种相对较新的材料。
Isothermally quenched ductile iron (austempered ductile iron, ADI) is a relatively new material to engineering industries.
研究了等温淬火温度对ADI中残余奥氏体及其力学性能的影响。
The influences of isothermal quenching temperature on the retained austenite and mechanical properties of ADI were studied.
由于等温淬火后的残余奥氏体温度较多而且稳定,故应进行四次回火。
Because the temperature of retained austenite is more and more stable after the isothermal quenching, it should be carried out four times.
研究了等温淬火球铁的相变过程,指出了对等温淬火球铁组织命名的看法。
The phase transition process of isothermally quenched ductile iron was investigated, the author's opi...
采用阶段等温淬火可得粒状贝氏体球铁,这种球铁具有优良的综合机械性能。
The granuler bainite ductile iron can be obtained with the help of step austempering. This kind of ductile iron presents the excellent combination of mechanical properties.
结果表明,等温淬火白口铸铁兼有较高的硬度和韧性,是一种经济实用的抗磨材料。
The result showed that isothermally quenched white iron had relatively high hardness and toughness so that it was a kind of economical and practical anti-wear material.
研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。
The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.
其经预先退火得到全部铁素体组织,然后等温淬火得到铁素体和贝氏体双相组织的基体。
The ferrite is obtained first through annealing, then biphase structure of ferrite and bainite is obtained through isothermal quenching.
介绍了盘丝的等温淬火工艺及解决淬火变形的主要措施,为生产一级品提供了质量保证。
The paper introduces the isothermal quenching process for wirt rod and some significant measures against quenching deformation and provides quality assurance for high grade products.
本文利用图像分析技术,系统研究了非金属夹杂物对等温淬火高硅铸钢力学性能的影响。
Effect of inclusions on mechanical properties of the high silicon cast steel was experimentally studied by using image analysis method.
介绍了等温淬火球铁齿轮的主要生产工艺,以及合金与非合金等温淬火球铁齿轮的试制应用。
The main production techniques and trail-manufacture of alloyed Aaustempered Ductile Iron (ADI) and unalloyed ADI gears are introduced.
钢锹热处理采用锻造余热等温淬火新工艺,并通过设备改造保证其质量,达到节能降耗的目的。
New forged austempering technology is used in steel spade heat treating for energy-saving and the quality of the treated spade is guaranteed in a retrofitted equipment.
拥有有大型落地磨床、大型立式车床、数控车床、贝氏体等温淬火热处理生产线等先进生产设备。
There is a large landing has a grinder, a large vertical lathe, CNC lathe, bainite isothermal quenching heat treatment production line and other advanced production equipment.
研究了在不同等温淬火温度热处理后高硅铸钢的显微组织与残余奥氏体量和材料断裂韧性间的关系。
The influence of austempering treatment on the microstructure, retained austenite and fracture toughness of high silicon cast steel has been studied.
由于等温淬火球墨铸铁(ADI)具有优异的综合力学性能,已在工业发达国家得到了广泛应用。
Thanks to its good comprehensive mechanical properties, Austempered Ductile Iron (ADI) has found a wide application in advanced countries.
对使用等温淬火球铁制造增压柴油机曲轴的技术可行性和生产可行性,以及经济效益与市场进行了分析。
The technology and production possibility of using ADI for making turbocharged diesel engine crankshaft, as well as its economic benefit and market was analyzed.
研究了由三种热处理工艺获得的全贝氏体等温淬火球铁的机械性能、组织状态及切削加工性能和耐磨性能。
The mechanical properties, structures, cutability and wear-resistance of full-bainite ductile iron obtained by using three kinds of isothermal quenching processes were investigated.
结果显示对于等温淬火球铁,激光硬化层中马氏体片的尺寸与基体奥氏体—贝氏体中的铁索体板条尺寸相近。
The effects of laser hardening on the structure and wearability of a normalized and an austempered ductile iron were investigated.
与传统的等温淬火工艺相比,“两步法”组织得到显著细化,而基体组织中残余奥氏体体积分数及含碳量无明显不同。
Compared with traditional austempered process, this new method would obtain much finer structure with nearly same volume fraction of retained austenite in matrix and carbon content of austenite.
本文还提供了等温淬火球墨铸铁基本性能的技术回顾,包括各种各样的优点:良好的力学性能,以及独特的铸造工艺。
The paper also provides a technical review of the Austempered Ductile Iron fundamentals including various advantageous, mechanical properties and the unique casting process.
奥氏体等温淬火球铁产品,包括ADI造纸磨片,为美国英格索兰公司生产的ADI风稿缸体和机头、以及国内负稿缸体系列产品。
Products: austemper ductile iron products, including of milling plate for paper making , ADI cylinder body and machine head supplied to one of USA company and the user in domestic customer.
研究了硼、铜、锰对贝氏体球墨铸铁组织和性能的影响,并讨论了球墨铸铁的性能滞后现象,即等温淬火后随时间延长硬度增加的现象。
The effects of elements B, Cu and Mn on structure and mechanical properties of the Bainite ductile cast iron in above-mentioned process were investigated.
利用等温回火实验,采集了淬火钢在不同条件下回火时的硬度数据。
The hardness data of quenched steel under different conditions were collected utilizing austempering tests.
利用等温回火实验,采集了淬火钢在不同条件下回火时的硬度数据。
The hardness data of quenched steel under different conditions were collected utilizing austempering tests.
应用推荐