在等温条件下,在各向同性变形阻力演化方程中引入温度项来考虑温度效应。
In the isothermal condition, the effect of temperature was introduced by temperature terms in evolution equations of isotropic deforming resistance.
以流体力学三大守恒方程为基础,建立了等温和非等温条件下的燃气管网稳态和动态仿真理论模型。
The theoretical dynamic simulation models for stationary flow and transient flow under the isothermal and non-isothermal condition are set up based on the three conservation equations.
为使还原条件与实际电弧炉生产相接近,在等温条件下对电弧炉粉尘球团的还原过程动力学进行了研究。
The electric arc furnace (EAF) dust pellets were reduced in isothermal condition in order to make the reduction similar to the EAF production, and the kinetics of the reduction process is researched.
讨论了半空间中满足无渗透边界条件的一维黏性可压缩热传导流体的流动,给出了在小扰动和非等温条件下稀疏波的渐进稳定性。
The asymptotic stability of the rarefaction wave has been established for the impermeable wall problem under small perturbation conditions and non-isothermal conditions.
通过DSC、WAXD和POM研究了PTT、PBT共混物在非等温条件下的相容性、结晶结构、结晶性能、结晶度及晶体形态。
DSC, WAXD, POM were performed to study the compatibility, crystallization structures, crystallization properties, crystallinity and crystal morphologies of the blends.
在等温过程加载的条件下,实验得出岩石的红外辐射能量随压力变化显著变化的结果。
The result of experiment has shown that the infrared radiation energy of rock changes obviously with pressure change under the condition of isothermal process loading.
综合流入动态关系涵盖了等温与非等温渗流条件,同样适用于常规生产井的产能预测。
Comprehensive inflow performance involves both isothermal and non-isothermal percolation condition, and is also helpful to productivity prediction of conventional Wells.
本文采用分流式等温镦挤成形工艺,成形了AZ 91 D镁合金圆柱直齿内齿轮,确定了最佳的成形工艺条件。
In this paper, form the AZ91D magnesium alloy cylindrical straight inner gear by shunt-type isothermal forging technology and determine the best process conditions.
利用本发明所涉及的低热传导主轴,可保持转子温度的稳定,使检测过程更符合等温试验的条件。
The low-heat conduction main shaft can keep the stability of the temperature of the rotor and lead the detection process to meet the condition of isothermal test better.
将吸附速率方程、吸附等温方程与物料衡算相结合预测了其他条件下的穿透曲线。
The breakthrough curve inside the bed under another operation is predicted by the adsorption rate equation, the adsorption isotherm equation and the material balance equation.
结果表明:在本实验条件下,淮河流域(江苏段)沉积物对三氯苯的吸附等温线呈线性,分配作用占主导地位。
The results indicate that the sorption isotherms of trichlorobenzene to sediment in Huaihe River (Jiangsu reach) are linear in the experiments condition, and distribution plays a leading role.
工艺条件试验说明可大空速下运转。经不同规模的等温式和绝热式工业应用证明具有高活性、高机械强度和耐水性好等特点。
It has been shown by these industrial applications that the performance of DC-type catalysts is comparable with the imported catalysts under similar reaction conditions.
利用等温回火实验,采集了淬火钢在不同条件下回火时的硬度数据。
The hardness data of quenched steel under different conditions were collected utilizing austempering tests.
同时根据非等温变体积条件下的动态法,液-固相反应的特点,导出了反应速率方程。
According to the catalytic characteristic of dynamic method, the equation of reaction rate has be deduced under the non-isothermal and volume-varying condition.
同时根据非等温变体积条件下的动态法液-固相反应的特点,导出了反应速率方程。
According to the catalytic characteristic of dynamic method, the equation of reaction rate has be deduced under the non isothermal and volume varying conditions by kinetic calculation.
在等温积分反应器中研究了操作条件对甲醇合成反应的影响以及C307催化剂上甲醇合成反应的本征动力学。
The intrinsic kinetics and effects of operational conditions on methanol synthesis over the C307 catalyst were investigated.
提出了等温线接触弹流问题的完全数值解,通过逆解迭代计算方法,获得了不同工况条件下的油膜压力分布、油膜厚度和油膜形状。
A numerical solution for the elastohydrodynamic line contacts problem under heavy loads is presented, and the corresponding method which makes use of the inverse iteration is also described.
设计了理想混合气体在等温等压条件下的可逆化学反应过程。
The reversible chemical reaction process of ideal gas mixture in the condition of constant pressure and temperature has been designed.
结果表明在等温中性的大气条件下,该模式对烟幕的扩散及浓度计算准确。
Comparison result show that on the isothermal medium atmosphere condition, the numerical simulation result of smoke diffusion and smoke concentration is accurate.
在非等温结晶条件下,由于链段活动能力下降,结晶增长速率变慢。
While under the non-isothermal Crystallization the introduction of BPDA would restrict the movement of copolymer segments and result in a slower crystallization speed.
同时根据非等温变体积条件下的动态法液-固相反应的特点,导出了反应速率方程。
According to the catalytic characteristic of dynamic method, the equation of reaction rate was deduced under the non-isothermal and volume-varying condition.
等温边界条件下热量能够及时散发,内部热阻和热源分布对模块温升起主导作用。
We also find that under isothermal boundary condition, due to heat can be distributed in time, the internal thermal resistance and heat distribution leading role on the module temperature rises.
摘要:以苯酚为液化试剂,在低温和低酸催化剂浓度等温和条件下对竹粉进行选择性酚化,分离得到液化液和竹纤维素微粉。
Abstract: the thermochemistry selective liquefaction of bamboo powder in phenol was carried out under lower temperature and lower acid-catalyzed concentration.
摘要:以苯酚为液化试剂,在低温和低酸催化剂浓度等温和条件下对竹粉进行选择性酚化,分离得到液化液和竹纤维素微粉。
Abstract: the thermochemistry selective liquefaction of bamboo powder in phenol was carried out under lower temperature and lower acid-catalyzed concentration.
应用推荐