介绍了自校准、低功耗气体测试仪的硬件和软件设计。
This paper introduces the hardware and software design of the gas detector with self-calibrated and low power.
为确保系统的可靠性，在硬件和软件设计中进行了综合考虑。
To assure the reliability of the system, it has been comprehensively studied during the hardware and software design.
提出了计数接口电路的硬件和软件设计方法，并进行了电路调试。
The hardware and software design methods of the counter interface circuit were put forward. And the circuit debugging has been carried on.
并对硬件和软件设计进行综合考虑，实现了简便、准确的仪器标定。
The precise calibration of the instrument was realized by the appropriate design of its hardware and software.
文章介绍了仪器的组成和功能，阐述了仪器的硬件和软件设计思想。
This paper introduces the compose and function of the instrument, the hardware principle and software method.
本文介绍了基于MODBUS 通讯协议的信号采集卡硬件和软件设计。
The paper introduces hardware and software design of signal collection card which is based on MODBUS protocol.
介绍了该系统的硬件和软件设计，并对其设计原理和设计思想进行了分析。
The hardware and software of the system is introduced, and the design principle and idea is analyzed.
对直流斩波器主电路如何选择专用微型计算机硬件和软件设计进行了讨论。
Selection of DC chopper main circuit, hardware and software design of special purpose microcomputer are discussed.
装置的相关硬件和软件设计保证了合闸瞬间的相位差小于允许合闸相角差。
The design of the hardware and software ensures the breaker closing at the just moment of zero- differential phase.
本文讨论嵌入式网络测控平台的实现，完成系统的构成以及硬件和软件设计。
This paper discusses the realization of the embedded network platform of measurement and control, the design of finish - systematic composition, hardware and software design.
介绍了一种新型小电阻测试仪的测量原理及其系统设计，包括系统的硬件和软件设计。
This paper presents the measuring principle and design of a new portable measuring instrument of little resistance, including its design of hardware and software.
文章介绍了AT 90s1200单片机在单相桥式变频器系统中的硬件和软件设计。
This paper introduces application of monolithic computer AT90S1200 to single-phase bridge-type frequency converter PWM.
本文详细论述CCT格式器硬件和软件设计特点，给出磁带数据格式，介绍一些使用情况。
This paper describes the design features of the CCT formatter hardware and software in detail. The CCT data format and some results of application are shown.
本文介绍以8031单片机为主体研制的一台智能化多参数检测仪器的硬件和软件设计思想。
This article presents the design of the software and hardware of an intelligent multivariable detection instrument based on a 8031 single—chip computer.
本文介绍了塔机加装夹轨器后的大车运行控制技术要求和PLC控制系统的硬件和软件设计。
This paper introduces the control technique requirement of the tower crane operation when the tower crane installed Rail clamping apparatus and PLC control system hardware and software design.
基本勾勒出整个控制系统的硬件和软件设计基本框架，详细描述一些实验中的具体的细节问题。
The basic design frame of the hardware and software of the whole control system is given here and some concrete problem in the experiments is described here in detail.
在分析系统控制方案的基础上，阐述了系统的硬件和软件设计方法，以及系统实现的功能和效益。
Bases on analyzing the control schemes of system, the design methods of software and hardware, as well as the function and benefit accomplished by the system are described.
首先阐述了实验动物生理参数信息监控及传输系统的基本组成，以及一些相关的硬件和软件设计。
Firstly, this paper introduces the basic parts of information monitoring and transmission system for physiological parameters of laboratory animals and some correlative hardware and software design.
在计算机通讯中，可采用伪随机码技术来进行识别。本文给出了识别装置的硬件和软件设计方法。
In computer communications, the pseudo - random code technique is used for recognition. A process of hardware and software design for the recognizing device is given in this paper.
文章介绍了综合量仪的机械结构、微机控制系统硬件和软件设计，并对测量误差来源进行了分析。
Here the design of mechanical structure of the tester and hard- and soft-ware of the PCcontrol system. An analysis is made on the sources oftesting error.
本文介绍了基于MSP430的无载测功系统的设计方法，包括了系统设计中的硬件和软件设计。
This article describes the MSP430-based no-load dynamometer system, including system design of hardware and software design.
完成了伺服刀架控制系统的硬件和软件设计以及伺服刀架实时监控软件—伺服刀架控制系统开发。
It has completed the design of servo turret control system hardware and the software as well as the development of the servo tool rest real-time monitoring software -servo turret control system.
同时在硬件和软件设计中充分考虑了系统的可靠性问题，使得该系统更适合于选矿厂恶劣的工作环境。
By sufficient reliability consideration in the design of both software and hardware, the system was considered to be more suitable for the vigorous environment of industrial flotation plants.
摘要：本文介绍基于单片机at89c 51控制的自动往返电动小汽车控制系统的硬件和软件设计。
Abstract: This paper introduces a kind of hardware and software design, which is the system of automatically back and forth electric car controlled by MCU AT89C51.
本文详细阐述了整个系统的硬件和软件设计，介绍了相应的抗干扰措施，并对误差来源作了简要的分析。
In this paper the design of hardware and software in this system are expounded in detail, the interference - resistant measures presented, the causes of error analysed.
介绍了该报警器的主要功能及特点；详细阐述该报警器的工作原理、硬件和软件设计思想及其实现过程。
The functions, the designing of hardwares and softwares, and the performing procedure of the alarm are all introduced in detail.
给出了一种基于GPRS的移动测控终端的一般设计，并从硬件和软件设计的角度作出了进一步的探讨。
This paper gives a general design of mobile measurement and control terminal, which is based on GPRS, and the design of hardware and software about it is discussed further.
综合本文中的硬件和软件设计，实现了记录仪的RS232串口通信功能，和记录仪对U盘的读写功能。
We synthetize the hardware and software, and realize the function of the communication of RS232 serial interface the function of the recorder reading and writing USB disk.
综合本文中的硬件和软件设计，实现了记录仪的RS232串口通信功能，和记录仪对U盘的读写功能。
We synthetize the hardware and software, and realize the function of the communication of RS232 serial interface the function of the recorder reading and writing USB disk.
应用推荐