截止阀有两个入口和一个出口。
一般的截止阀适合用于适度的节流应用。
Regular style globe valves are suitable for moderate throttling applications.
进口截止阀的阀杆轴线与阀座密封面垂直。
Imports of cut-off valve stem and valve seat sealing surface perpendicular to the axis.
大部分平衡阀采用截止阀结合抛物线(插塞)阀瓣。
Most Balancing Valves are globe style and incorporate a parabolic (plug) shaped disc.
主阀，截止阀或角阀结构，采用隔膜驱动，液压操作。
The main valve, globe or angle pattern, is diaphragm actuated, hydraulically operated.
形压降最小，即使与通用的直立式截止阀比较也是如此。
The Y-pattern style has a minimal pressure-drop, even when compared with a conventional upright style globe valve.
截止阀结构的止回阀应该用于水平管道，阀杆垂直朝上。
Globe pattern check valves should be used in horizontal pipe runs with the stem straight up.
介绍了T形钠截止阀阀体的结构、特点及机械加工方法。
Introduces the structure, characteristics and mechanical machining methods for T-type Sodium globe valve body.
截止阀用于需要节流，或既需要节流也需要关闭的应用场合。
Globe valves are used where throttling or both throttling and shutoff are required.
如向上泵送则必须先关闭截止阀，防止砼倒流，然后拆下出料管。
Such as pumping up you must turn off valve to prevent backflow of concrete, then removed the feed tube.
检查自动给水系统的止回阀，截止阀等各阀是否正确开启或关闭。
Examine the check valve, cut off valve of auto water supplying system see if open or close correct.
第三，高压截止阀或者泄压阀坏了，即发生了内泄漏或者外泄露。
Third, high pressure cut-off valve and pressure relief valve is broken, the inside outside leakage or leakage happened.
闸阀和截止阀(金属与金属连接)的阀座不具备不透气关闭的性能。
Gate and globe (metal to metal) seats cannot provide bubble tight shut-off. Resilient seated butterfly valves are bubble tight by design.
本公司主要生产PP-R球阀、角阀、截止阀、止回阀、管接头等产品。
The company mainly produces the products involving PP-R ball valve, anglevalve, stop valve, check valve and pipe fittings.
配置优质安全阀、截止阀、压力表及压力控制器，确保锅炉安全可靠运行。
Equipped with the high quality safety valve, cut-off valve, pressure gauge and pressure controller to ensure the safe and reliable running of the boiler.
蝶阀的流体特性相当于截止阀的三倍甚至更高，相当于同样尺寸的闸阀的75%。
Butterfly valves have flow characteristics three times better than globe valves and approximately 75% of an equivalent size gate valve.
与倾斜式结构相比，直线式结构截止阀在全开位置具有更高的压差(压力损失)。
The full open position in straight pattern globe valves has higher differential pressure (pressure losses) than an oblique pattern valve.
结果表明，该阀体爆裂属脆性断裂，爆裂系截止阀材质、组织及铸造质量差所致。
It was concluded that brittle fracture of the valve body was the result of poor casting quality.
关闭分配阀卸料门，如有截止阀则打开，泵送清水至活塞从输送管输出端泵出为止。
Close the door distribution discharge valve and, if cut-off valve is opened, pumping water to the piston from the pipeline until the pump output.
我们的产品线包括：闸阀，止回阀，截止阀，止回阀，双板的止回阀，高性能蝶阀。
Our product line includes: Gate valves, Check valves, Globe valves, Non-Return valves, Dual-Plate Check valves, and High Performance Butterfly valves.
在我们的生产、生活中，过去常用直通式、小口径截止阀，现在已渐渐被球阀所取代。
In our production, life, it used to straight-through, small-caliber valve, ball valve is now gradually being replaced.
介质通过此类阀门时的流动方向发生了变化，因此截止阀的流动阻力较高于其它阀门。
Medium through the valve when the flow direction of these changes, so a higher cut-off valve on the flow resistance of the other valve.
对于高度超过头部，操作困难的闸阀、截止阀和角阀，可以采用巴氏可调节锤击链轮。
The babbitt adjustable Hammer-Blow Sprocket Rim is for use with hard to operate gate, globe and Angle valves in overhead locations.
对于高度超过头部，操作困难的闸阀、截止阀和角阀，可以采用巴氏可调节锤击链轮。
Rim is for use with hard to operate gate, globe and Angle valves in overhead locations.
针对煤矿井下高压、大流量截止阀操作费时费力的实际情况提供了一种新的解决方案。
A new solution has been provided for the real problem of high pressure, and large-flux valve taking much time and energy in the coal mine.
采用宏微观检验、化学成分分析及力学性能测试方法对截止阀阀体爆裂原因进行了分析。
This paper studied the causes of bursting of stop valve by the methods of visual inspection, metallographical examination, chemical analysis and mechanical property test.
介绍了涂装线设计中常用的各种类型的阀门(包括球阀、蝶阀、截止阀、闸阀)及其特点。
Different types of valves (including ball valve, butterfly valve, cut-off valve and brake valve) commonly used in designing painting line and their features were introduced.
如果泄压口正常，那么，不接工件，用高压截止阀截断压力，看试验机本身能否保住压力。
If the discharge pressure is normal, so, don't answer the artifacts, cutting with high pressure cut-off valve pressure, see if we can keep pressure testing machine itself.
如果泄压口正常，那么，不接工件，用高压截止阀截断压力，看试验机本身能否保住压力。
If the discharge pressure is normal, so, don't answer the artifacts, cutting with high pressure cut-off valve pressure, see if we can keep pressure testing machine itself.
应用推荐