构建了021活塞浇铸模力学模型，进行变形计算。
Constructed the mechanical model of 021 pistons casting mold and deducted the deformation.
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。
Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
本文给出缓慢倾斜海底上波浪浅水变形计算的数值模式。
A numerical model for wave shoaling computation over a gently sloping bottom is presented.
本文针对当前土石坝变形计算中的一些重要问题进行了讨论。
This paper deals with some important technical problems about the calculation of deformation of earth-rock dams, interesting hydraulic engineers at present time.
简要分析大型储煤场的受力特性及各种工况组合下的内力、变形计算。
Additionally, mechanics characteristics of the large coal storage are analyzed, and its internal forces and deformations under various engineering conditions are calculated.
首先从能量原理出发，推导了斜支单跨梁内力及变形计算的一般公式。
The general formulas of internal forces and displacements of skewly supported single-span beam are deduced from the energy principle.
本文介绍了用于梁变形计算的共轭梁法的原理，并举例说明了该方法的应用。
This paper presents the principle of conjugate beam method which can be applied to the calculation of deformation.
柔性基础下复合地基应用相当广泛，但其沉降变形计算理论尚待进一步研究。
The application of a composite foundation under flexible base slab is quite extensive; yet its theory of calculating settlement deformation needs to be further researched.
本文介绍了用于梁变形计算的共轭梁法的原理，并举例说明了该方法的应用。
This paper presents the principle of conjugate beam method which can be applied to the calculation of deformation. Some applications of the method are introduced in this paper.
并根据有限元法的原理，设置适当的网格数、简化变形计算，提高计算速度。
According to the theory of the finite element, we set up proper number of gird and simplify deformation computation to increase computing speed.
先期固结压力是土的重要力学特性参数，对变形计算和强度分析有较大影响。
The preconsolidation pressure is an important parameter for soil deformation calculation and strength analysis.
文中首先介绍了散斑图像相关数字技术的基本原理，然后给出了变形计算公式。
The basic principle of speckle image correlation digital technique was introduced firstly in this paper.
上述计算结果表明，所建立的波浪变形数值模型可以用于近岸波浪变形计算中。
The model is proved to be applicable to predicting wave deformation including wave breaking.
以m法为基础，建立了考虑桩顶冠梁效应的挡墙变形计算模型，给出了计算公式。
On the basis of method "m", a model of calculating deformation of DMP retaining wall is presented with effect of beam at the top is considered. A calculating formula is proposed.
岩土工程中的非连续变形计算和数值模拟是岩土力学与工程领域中的前沿课题之一。
Discontinuous deformation computations and numerical simulations are important topics in geomechanics and are catching more and more attention.
本文模型系统主要由两部分组成，波浪浅水变形计算模块和港内波浪绕射计算模块。
The model system is made up of two main sections, the calculating module for shallow water wave transformation, the calculating module for harbor wave diffraction.
在对金属结构的焊接过程进行理论分析之后，本文介绍了焊接变形计算的计算机程序。
Following a theoretical analysis of the welding process of metal structure, a computer program for the calculation of the welding deformation is described in this article.
单位载荷法是一种简单、直观、实用的钩针变形计算法，它有别于复杂的传统计算法。
The unit load method is a simple, easy and practical calculating method which differs from the complicated traditional ones.
精密机械热变形计算中，通常只考虑温度在零件中的分布状况对零件变形所产生的影响。
The conventional calculation of thermal deformation of precision mechanism involves an exclusive consideration of the influence of temperature distribution on part deformation.
将1965～1978年间的超静水压力和变形计算值同实测值作了比较，结果令人满意。
The comparisons from 1965-1978 between the computed and actually measured data on hydrostatic excess pressures and deformations are good.
文中提出了利用考虑地基土水平基床系数修正的杆系有限元法进行加固后深基坑变形计算。
This paper puts forward a deformation calculation method based on the modified horizontal coefficient of subgrade reaction.
介绍了ANSYS软件用于水轮发电机双托盘支撑推力轴承的热传导和热弹变形计算的方法。
This paper presents a method for calculating heat conduction and thermo-elastic deformation of double-disk supported thrust bearing by means of ANSYS program.
地基附加应力和变形计算是地基设计计算的重要内容，直接关系着结构设计的安全可靠程度。
Research on numerical simulations of displacement deformation and additional stress for buildings in mining active area;
考虑下部钻具组合的弯曲效应和接触状态，运用间隙无法对下部钻具组合进行了受力变形计算。
The force and deformation of bottom hole assembly (BHA)are calculated by the gap-element method, in consideration for the bending effect and contact state of BHA.
提出了适用于长期循环荷载作用下粉细砂累积变形计算的等效黏塑性本构模型及数值模拟方法。
A new constitutive model, namely equivalent viscoplastic model, adaptive to cumulative deformation computation of sandy silt under long-term cyclic loading is proposed.
该方程的形式规则统一，计算过程简单，稍加改进可以推广到平面刚架的内力和变形计算中去。
The equation is simple, uniform and easy to extend to plane rigid frame with some modification.
首先，运用了赫兹公式和有限元法对外形规则、接触状态简单的零件进行接触应力和接触变形计算。
First contact stress and deformation of parts which have normal shapes and simple contacting status are calculated using Hertz formula and finite element method.
采空区地面变形计算问题是一直困扰通过采空区高速公路建设的难题，之前尚无良好的理论计算方法。
The ground deformation computing problem of goafs of highways is one of the difficult problems in highway construction, and until now there is no perfect computation methods to settle with.
合理地确定钢管混凝土的抗弯刚度和剪切刚度是进行其变形计算的重要前提，目前国内外很少有系坑的研究和报道。
The rational determination of the flexural stiffness and the shearing stiffness of concrete filled steel tube is very important in the deformation calculations.
合理地确定钢管混凝土的抗弯刚度和剪切刚度是进行其变形计算的重要前提，目前国内外很少有系坑的研究和报道。
The rational determination of the flexural stiffness and the shearing stiffness of concrete filled steel tube is very important in the deformation calculations.
应用推荐