对轿车发动机缸体的材质和加工性进行了实验研究。
The structure, property and machinability of materials of sedan-car engine block was tested and studied.
这使得更有效地配置发动机缸体也增加了进气口的效率。
This allowed for a more efficient engine block configuration and also increased the efficiency of its air intake.
本设备专门用于对发动机缸体、缸盖水套及油道的泄漏检测；
This equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.
分析了目前发动机缸体、缸盖渗漏缺陷的主要原因，缩松的形成及影响因素。
The main reason of leakage in cylinder block and head was analyzed, and the formation mechanism and influencing factor of shrinkage was revealed.
通过采用ATEQF520仪器及电子调压阀对发动机缸体缸盖进行密封性检测；
By adopting ATEQ F520 instruments and electronic governing valve the engine cylinder cc sealing detection.
也可用于清洗机械设备、发动机缸体、汽配零件、塑料玻璃制品等表面油污和工装油污清洗。
Can also be used for cleaning machinery and equipment, engine block, auto parts, plastic products, such as glass surface oil and oil cleaning equipment.
生产工艺，成本，及分包商将确定允许短期大规模生产的整个德育- 5录像机发动机缸体。
Production processes, costs, and sub-contractors will be identified to allow short-term mass-production of the entire MCE-5 VCR engine block.
曲轴孔是发动机缸体上的重要加工部位，其加工质量的好坏直接影响发动机装配精度和整机性能。
The crankshaft holes are the key parts on the engine cylinder block, its machining quality will directly affect the assembly precision and overall performance of the engine.
涵盖了从发动机缸体等零部件铸造、轮胎制造、座椅、内饰件制造，以及汽车检修、保养等诸多方面。
It covers many aspects from engine cylinder parts foundry, manufacturing of auto tyres, seat, manufacturing of interior motives to auto examines, repair and maintain, etc.
从发动机缸体的加工效率、加工精度、安全性等角度出发，分析了发动机缸体高速加工的优势和可行性。
From different aspects such as efficiency, precision and security of machining, the superiority and feasibility of high-speed machining of cylinder were analyzed.
中重型汽车变速箱箱体，离合器壳体，上盖，发动机缸体等四大系列产品。主要为一、二汽提供配套服务。
China heavy-duty automobile gearbox body, clutch shell, gearbox top cover, automobile engine organism, etc four. Offer service for one the second automobile Factory.
典型应用：各种重要零部件螺纹孔脱扣后修复，如：注塑机模板螺纹孔的修复。发动机缸体螺纹孔的修复等。
Typical Applications: release a variety of important parts to repair the screw holes, such as: injection molding machine template screw hole repair. Engine block threaded holes of the repair.
对于铝合金检具变形引起的尺寸不稳定，给予规范的热处理和粘接装配，使发动机缸体用检具本体变形得到控制。
The dimension instability is caused by aluminium alloy deformation. The methods such as heat treatment and assembly to control the inspection device deformation are put forward.
针对发动机缸体的工艺特点及生产实际要求，对高速加工中存在的工艺问题进行了分析，给出了具体的解决措施。
Aiming at the process features and technical requirements of machining, the measures were put forward to resolve the process problems of machining.
及XR型两种发动机是公司目前在线生产的产品，本文主要探讨建立这两种发动机缸体共用柔性生产线的工艺方案。
R engine and XR engine are the products produced by our company at present. The paper mainly discussed the technique scheme of setting up a common flexible machining line for R and XR block.
发动机曲轴箱和气缸体通常铸造成为一体，因此算作汽车中最大且最复杂的金属结构。
The engine crankcase and block are usually cast into one piece and therefore can be seem as the largest and most intricate piece of metal in automobile.
采用拓扑优化和形状优化相结合的集成优化方法，研究了结构优化方法在发动机气缸体轻量化设计中的应用。
An integrated method of topology optimization and shape optimization was presented to study the application of structure optimization to the light-weight design of engine block.
除了顶置凸轮（OHC）发动机以外，凸轮轴都安装在气缸体里面。
The camshaft also fits inside the block, except on overhead-cam engines (OHC).
从实验结果可知，发动机的缸体的余热量、废气流量和排气温度随着转速和扭矩的增加而增加。
From the experimental results, we can see that the remainder of the engine block heat, air flow and exhaust temperature with the speed and torque increased.
气缸盖带有用于冷却的水套，在装配发动机时，这些水套通过出水口与气缸体水套相连通。
Cylinder head contains water jackets for cooling in the assembled engine, these water jackets are connected through openings to the cylinder-block water jackets.
本机床适于磨削、铣销各种发动机的缸体、缸盖平面。
It suits for grinding and milling all kinds of cylinder boby and cover surface.
利用X射线无损检测方法，对铸造铝合金制造的某发动机汽缸体的残余应力分布进行了全面分析。
Residual stress distribution for engine cylinder body made of casting aluminum alloy was investigated completely using X-Ray nondestructive detection method.
发动机壳体为一个其一端为密封的钢铸圆柱缸体，另一端则为敞口的喉道及喷管。
The motor case is a steel cylinder closed tight at one end. the other end is the open throat and nozzle.
将变密度拓扑优化方法应用于发动机气缸体轻量化设计中。
A variable density based topology optimization method was applied to the light-weight design of engine block.
水冷发动机的气缸体是发动机的基本构件。其他部件都支承或安装在他它上面。
The cylinder block of liquid-cooled engines forms the basic framework of the engine. Other parts are attached to the cylinder block or are assembled in it.
水冷发动机的气缸体是发动机的基本构件。其他部件都支承或安装在他它上面。
The cylinder block of liquid-cooled engines forms the basic framework of the engine. Other parts are attached to the cylinder block or are assembled in it.
应用推荐