利用温度传感器测到被控对象的温度信号与设定温度值进行PID调节,从而控制高频输出功率的大小。
Temperature sensor will be used to measure the temperature signal and build temperature for PID adjusting to realize the automatic output high frequency power.
利用微加工技术,我们还将微加热器和温度传感器集成到本芯片上。
Using micromachining technology, we also integrated micro-heater and temperature sensor on the chip.
另一个例子就是利用一个温度计和多个传感器监测多个位置的温度时采用的扫描仪。
Another example is a scanner for monitoring temperatures at several locations using one thermometer and multiple sensors.
一种新型的单光源半导体温度传感器,利用光开关控制设置参考通道。
A new semiconductor temperature sensor with single light source is proposed. The light switch is used to construct a reference channel.
研制了一种利用光纤进行温度、位移测量的复合传感器。
This paper proposed a complex sensor of synchronous measurement of temperature and displacement.
介绍该电路的主要工作特性及工作原理,给出利用MC74设计的无线数字温度传感器电路的原理及部分程序代码。
The main characteristic and operating principle of MC74 are introduced, the wireless digital temperature sensor circuits and some of programs based on MC74 are given.
利用 与控制装置(例如可控硅元件)连接的传感器来控制温度。
The temperature is controlled by a sensor connected to a control devise such as a thyristor.
采用多个红外传感器同时检测空气预热器,根据空气预热器的温度分布规律将这些数据利用D-S证据有效的融合起来。
Many infrared sensors detect the air preheater. According to the temperature of the air preheater distribution of these data, the system uses D-S evidence theory to integrate effectively.
在对应电路中利用一个温度传感器和一个探测器去实时计算模型参数。
In corresponding electronic circuit, a digital temperature sensor and an extra detector were utilized to calculate parameters of models in real time.
利用激光在皮肤中的传导及应用红外传感器探测皮肤温度的原理,设计激光美容手术温度控制模型,控制激光手术安全。
Utilize the theory of laser conducting among skin and use infrared sensor to detect the skin temperature, design the laser operation temperature control model to improve the safety of laser operation.
本文介绍了利用数字式温度传感器ds18 B 20构造大功率激光二极管恒温制冷系统的方法。
A precise temperature control system using DS18B20 for high power laser diode is introduced in this paper.
介绍利用DS1620等数字式温度传感器进行仪表的温度补偿以及故障诊断、报警等,实现仪表的智能化设计方案。
This thesis introduces how to use digital temperature transducer DS1620 to cany compensation for temperature, failure diagnosis and alarm of instrument and to realize intelligent design of instrument.
利用CMOS工艺下衬底型双极晶体管的温度特性,设计了一种精度较高的温度传感器。
A high accuracy temperature sensor is designed by applying the temperature characteristics of a substrate bipolar transistor in CMOS technology.
本文详细介绍了一种利用酒精传感器、温度传感器、单片机等实现的主动酒精探测系统的硬件和软件实现方法。
This thesis introduces a kind of alcohol detection system's hardware and software implementation using the alcohol sensor, temperature sensor and MCU.
利用半导体光吸收原理,提出了一种新颖的半导体吸收型光纤温度传感器。
A new kind of semiconductor absorption fiber-optic temperature sensor is described in the paper.
为提高传感器的温度性能,利用PIC单片机对传感器进行温度补偿。
To improve temperature performance of electric eddy transducer, PIC single chip processor is adopted for temperature compensation of transducer.
利用ZMD31020传感器信号处理器,实现了硅压阻式传感器的非线性及温度补偿。
The ZMD31020 is a special sensor signal processor optimized for piezoresistive sensor nonlinearity and temperature compensation.
光纤微弯传感器是一种强度调制式光纤传感器,它是利用光纤的微弯损耗效应来测量压力、温度、加速度、应变、流量等环境参量的变化。
It utilized the microbend loss resulting from optical fiber bending to measure the change of environmental parameters, such as pressure, temperature, acceleration, strain and flow.
该测温系统利用分布的多台下位机,通过选择合适的测温传感器,并采用调制解调器进行数据传输,解决了温度测量中的多点和分布的问题。
The system solves the temperature measuring problem of multi-points in distributed location by using a central computer and a lot of distributed computers.
系统利用分布式光纤光栅温度传感器对电力线路温度数据进行实时检测,然后将检测到的温度数据传送至数据处理部分。
The data acquisition sub-system USES distributed optical fiber grating temperature sensor system to measure the temperature of the cables, and transmits the data to the data processing sub-system.
利用感温式和感烟式传感器对火灾发生时温度和烟雾两个主要参量进行智能监测很好地解决了报警灵敏度和误报率之间的矛盾。
The contradiction of alarm sensitivity and false alarm rate is solved by intelligent monitoring of the temperature and aerosol, which are detected by temperature sensor and aeros...
利用微型数字压力传感器和数字信号处理(dsp)串口通迅,读取数字压力传感器中压力、温度值及补偿参数,用软件进行温度补偿和高度计算。
Based on the digital signal process (DSP) communication with digital pressure sensor, the pressure, temperature and calibration coefficients can be read from digital pressure sensor.
利用冷接点补偿技术,伏特表的温度以及传感器探头反馈的温度可以被分别测量。
The temperature of the voltmeter, and hence that of the material being measured by the probe, can be measured separately using cold junction compensation techniques.
热电偶以及热电堆也是利用塞贝克效应的器件用于测试两个待测点之间的温度差,其工作时将其中的一个待测点连接伏特表而另一个待测点连接传感器探头。
Thermocouples and thermopiles are devices that use the Seebeck effect to measure the temperature difference between two objects, one connected to a voltmeter and the other to the probe.
研究结果表明,利用双光路结构,并结合适当的数据融合方法可以很好的消除温度对光纤位移传感器的影响。
The result shows that optical fiber displacement sensor's sensitivity problem to temperature can be well eliminated by using such configuration as well as choosing the proper data processing.
利用了温度传感器、水位传感器、单片机等以及电磁阀、水泵等执行部件,使整个系统呈现智能化控制。
The use of a temperature sensor, level sensor, single-chip, as well as solenoid valves, pumps and other components to implement the entire system has intelligent control.
介绍利用电阻加热丝、印制基板材料设计制做的加热元件和用晶体管作温度传感器设计制做温度测量控制器的电路工作原理及其在物理实验中的应用。
A heating element is designed using resistance heating silk and printed board, and an instrument of temperature measurement and control is designed using transistor as the temperature sensor.
利用有限元分析工具ANSYS,对所设计的硅基微结构气体传感器的温度场进行了模拟。
The temperature distributing of micro-structure gas sensor based on silicon substrate is simulated by means of finite element analysis (FEA) tool ANSYS.
利用有限元分析工具ANSYS,对所设计的硅基微结构气体传感器的温度场进行了模拟。
The temperature distributing of micro-structure gas sensor based on silicon substrate is simulated by means of finite element analysis (FEA) tool ANSYS.
应用推荐