角振动台与伺服转台是转台中常见的两类测试设备。
The angular vibration table and the servo turntable are two familiar testing devices.
本文叙述了高精度伺服转台的单板计算机控制系统的设计方法。
This paper describes the design method of Single Board Computer Control System for a High precision servo table.
探测设备包括昼光摄像机、红外热像仪、伺服转台和控制机柜。
The detecting equipment composes of the TV camera, the thermal infrared imager, the servo turntable and the control cabinet.
针对电液伺服转台数学模型辨识精度不高问题,提出一种基于小波理论的电液伺服转台动态模型识别方法。
A dynamic model identification method of electro-hydraulic servo turntable based on wavelet theory is proposed, which has a higher identification precision compared with traditional methods.
本论文从电路板故障和系统故障两个层次上对精密伺服转台系统的先进故障诊断技术进行了深入研究与实现。
This paper mainly focuses on the advanced fault diagnosis technology of high precision servo turntable's control system from circuit board fault and system fault.
本文对三轴陀螺伺服转台模型进行了较为详细的分析,并进行了适当的简化,在此基础上对系统进行了解耦设计。
Detailed model analysis and proper simplification for gyro servo system of the three axis turntable are presented. Then the decoupling design is made for the system.
首先,针对某型精密伺服转台系统中三块电路板(模拟控制板、单片机板和测角控制板)设计了专门的电路板测试仪。
First, a special instrument to test the analog-control board, single-chip board and angle-measure board in the high precision servo turntable system is designed.
本文在完成某高精度伺服转台恒温系统的研制任务基础上,全面阐述了伺服转台台面恒温系统的实现措施及理论依据。
Based on finishing steady-temperature system of high accuracy servo turn-table, this paper elaborates the theory and the realizing way of steady temperature system of servo test turn-table.
本文结合“4ktd- 170型四轴伺服转台系统”项目,完成了图像跟踪系统的研制并对跟踪算法进行了研究。
Combined with "4ktd-170 Four-Axes Servo Turntable System" project, the thesis finishes the development of Image tracking System and the research of tracking algorithms.
采用了脉冲调宽功放装置(PWM),直流力矩马达直接驱动转台框架的数字伺服调速体制。
It is digital servo timing control system which is driven by PWM, direct current moment motor.
作为伺服动力驱动的一个重要元件,中空液压伺服马达在多轴液压仿真转台等领域具有重要的应用价值。
As a servo power actuation important part, the center spatial hydraulic pressure servomotor has the important application value in multiple spindle hydraulic pressure simulation table.
基于DSP的数字化转台伺服系统数字测速的实现。
Realization of digital speed measurement based on DSP for gimbal servo system.
本论文的研究对于提高三轴光学跟踪试验转台以至于所有电动仿真转台的伺服控制系统的精度来说,是一项十分重要和有意义的工作。
The researches of this paper are very important and significative job to improve precision of servo-control system of three axis optical tracking test table even all type of electric simulator tables.
因此深入研究单通道电液位置伺服系统和双液压马达驱动系统的性能及控制策略对仿真转台的研制具有非常重要的实际意义。
Therefore, it is necessary to study the properties and control strategies of single channel hydraulic servo system and dual hydraulic motors driving system.
本文介绍了基于TMS320F 2812三轴跟踪转台伺服控制系统的设计与实现。
A design method of the three-axis tracking table servo system based on TMS320F2812 is introduced in this paper.
仿真结果表明,有效提高了转台伺服系统的动态跟踪精度,并具有较好的鲁棒性能。
The simulation result on the servo system indicates that the control method above improves effectively dynamic tracking performance of the servo system and has good robustness.
本文介绍了一种为三轴飞行模拟转台设计的新型液压伺服马达。
In this article, a new hydraulic servomotor designed for three axes flight simulator is introduced.
本文主要研究了直接驱动永磁同步电机转台系统的伺服刚度问题。
The dissertation mainly discusses the servo stiffness of direct drive NC rotary table servo system.
转台伺服系统作为光电精密跟踪系统的硬件设备,在光电精密跟踪系统的研制中起着重要作用。
As a hardware in the system of optoelectronic tracking system, table is very important in manufacturing precise servo system.
按照转台的四种功能:位置、速率、伺服和正弦摇摆,设计并实现了各控制系统的硬件、软件,实现四种功能,通过精度检测,达到了技术指标的要求,取得了令人满意的效果。
According to four functions of turn table, position, speed, gyro servo and sinusoidal movement, the hardware circuits and software programs of four control systems are designed and accomplished.
本文叙述了TC-2型液压三轴飞行模拟转台修改设计的指导思想和性能要求,介绍了转台伺服系统以及系统调试结果。
The paper describes the design concepts and proposed specifications for the repair work of a TC-2 simulator. The servo-syStems and their test results are then presented.
三轴飞行仿真转台外框要求有相当宽的频带,因此用于外框的电液位置伺服系统的时滞就必须考虑,这对进一步提高系统频带有很大关系。
The time-delay should be considered in designing the system of the outer axis of three-axis with high frequency bandwidth. This is important for improving the bandwidth of system further.
针对仿真转台电液伺服系统的非线性特点,提出了一种基于模糊补偿的自适应控制方法。
This paper presents an adaptive control based on the rule adaptive fuzzy compensator according to the electrohydraulic servosystem's nonlinear characteristic in the simulator.
详细论述了基于光电编码器的高精度的数字测速方法,及其在转台伺服系统中的实现。
High Accuracy digital speed measurement methods based on optical encoder were discussed in detail. Then it introduces the realization of this methods in the servo system.
详细论述了基于光电编码器的高精度的数字测速方法,及其在转台伺服系统中的实现。
High Accuracy digital speed measurement methods based on optical encoder were discussed in detail. Then it introduces the realization of this methods in the servo system.
应用推荐