电力供应是固定的，撤销主电源电压调节器。
The power supply is fixed by removing the voltage regulator for the main power supply.
在进行电路改进时，切断主电源，并确保电源完全切断。
When modifying the circuit, it is required to cut off the main power and make sure that the power is disconnected completely.
每个中继器都配备了一主电源的1.9米电缆供电单元。
Every repeater unit is supplied with a mains power supply unit with a 1.9 metre cable.
采用电器互锁自动反馈，电梯主电源无需要串入本装置。
The device makes the main supply need not connect to it because of its using electronic interlock.
应急发电机和应急配电板能在主电源失灵的情况下维持电力供应。
The emergency generator and switchboard can keep power supply in case of failure of main power supply.
本机提供三种充电方式：分别是主电源充电，计算机充电和汽车充电。
This machine offers three kinds of charging ways: charge by power supply; computer and car battery.
但是推荐的方法是在夜间断开笔记本电脑的主电源避免高温损害电池。
It is recommended, however, to turn the laptop off overnight because of heat harms the battery.
主电源采用GTO直流斩波器。主控采用带微分反馈环节的开关斩控模式。
GTO dc chopper is adopted for the main power supply while the switch mode control with derivative feedback loop is adopted for the main controller.
在对电器部分维修时，只能由合格电气员工或者维修人员操作，并注意切断主电源。
The repair of electrical system can only be performed by the qualified electrician or repairer, and during this repair, the main power must be disconnected.
这是因为选择了安全的固有优势，顺利功率传输和操作的能力在一个主电源故障正常。
This was chosen due to the inherent advantages of safety, smooth power delivery and the ability to operate normally during a mains power failure.
电力线网络是一个技术方面的能力转化的内部主电源电路成为一个家庭网络的基础设施。
Powerline networking is a technology that's capable of transforming an in-house mains power circuit into a home networking infrastructure.
风力发电机的是该系统的主电源，并且电池用于能量存储和功率补偿来恢复自然的风电不均。
The wind generator is the main power source of the system, and the battery is used for energy storage and power compensation to recover the natural irregularity of the wind power.
只要是电源线仍接插在墙上电源插座，即使关掉机器上的电源开关，但机器仍并没有完全断开AC主电源。
The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
的可靠性和在许多工业应用这些系统的可用性是至关重要的管理操作或维持在主电源或黑褐色出局出局操作。
The reliability and availability of these systems in many industrial applications is critical to manage operations or maintain operations during mains power brown outs or black outs.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
系统实现了电源模块的设计，提供主电源和备用电源两种方式，同时具体完成了以太网模块、存储电路、总线接口模块等的设计。
This article realizes the design of power module which provides two ways for power: main power and backup power, and completes the design of Ethernet module, and storage module.
KA5为跳闸报警继电器。当设备产生偏励磁、可控硅故障、过电流等故障时，KA5吸合，断路器分励线圈得电跳闸，切断主电源。
When there are bias excitation, controllable silicon failure, over current and other failures, KA5 gets absorbed and breaker loop trips by powered on so as for switching off main power supply.
柴油发电机组是当今社会生产和生活的重要的主电源或备用电源，而柴油发电机组的监控系统则是柴油发电机组的一个重要组成部分。
In today's society, diesel generator set is the important main power or spare power in production and life, while supervisory control system of diesel generator set is an important component.
答：系统需要连接到等离子体电池，你想要得到更好的结果的话，最好不要使用主电源或者电池电源，使用等离子体能源你就可以实现更多的结果。
The systems needs to be connected to plasma battery you get better result do not use main power or battery power, with plasma power you achieve more results.
通过简单分析该主电路的结构形式和工作原理，证明它是一种对电网污染少、整流输出电压特性好的焊接电源主电路形式。
By analyzing its structure and working principle, it proves that the new circuit has little pollution to the network and has well characteristic of the output voltage.
在线号010前的开关是一个主断路器用来将整个系统的电源切断。
The switch before line 010 is a master disconnect for the power to the entire system.
文章介绍了一种用于工业设备的等离子体放电电源，给出了主电路、功率稳定电路的设计过程。
This article introduces a plasma discharge power supply for industrial equipment, and gives the design process of the main circuit and power stability circuit.
对于开关补偿电源的主电路部分，特别是变压器设计、PWM控制芯片选择、以及工作原理进行了详细的阐述。
As for the main part of switching power, in particular, more detail in the transformer design, PWM controller selection, and working theory.
对一种大功率IGBT逆变式空气等离子切割电源的主电路进行了原理分析与设计。
The paper analyzes and designs the main circuit of high-power IGBT inverted air plasma cutting power supply.
在主界面下，电源将在无任何操作的约30秒后自动断电。
In the main interface, power supply will be no operation automatically after about 30 seconds off.
在主界面下，电源将在无任何操作的约30秒后自动断电。
In the main interface, power supply will be no operation automatically after about 30 seconds off.
应用推荐