UV curable offset ink sample was prepared and its thixotropism was discussed.
制备了UV胶印油墨样品，探讨了油墨样品的触变性。
A UV curable offset ink sample was prepared and its thixotropism was discussed.
制备了UV胶印油墨样品，探讨了油墨样品的触变性。
In this paper, an epoxy acrylates UV curable coating for optical fiber was reported.
介绍了环氧丙烯酸酯类U v固化光纤涂料。
The UV curable cathodic electrophoretic paint prepared by polyurethane acrylate showed good properties.
所得的聚氨酯丙烯酸酯光固化阴极电泳漆综合性能良好。
The preparation, coating process and application prospect of the UV curable powder paint are introduced.
介绍了紫外光固化粉末涂料的制备、涂装工艺及应用前景。
In this paper, research progress of the photo-initiators and their applications in UV curable adhesive were reviewed.
综述了光引发剂以及它们在紫外光固化粘合剂中的应用研究进展。
The researching results indicate that UV curable offset ink has the typical non - Newtonian behavior and thixotropy .
研究结果表明UV胶印油墨表现出非牛顿流体的特征，具有触变性。
Mechanism and components of UV curable adhesives such as oligomers, polymerizable monomers, photoinitiator are introduced in detail.
详细介绍了紫外光固化粘合剂的应用机理及其组成成份，如齐聚物、反应单体、光引发剂。
The performance of UV curable varnish film has a great effect on the quality of package printing products, especially the flexibility.
UV光油的成膜性质对包装印刷的质量影响很大，特别是UV光油固化膜层的柔韧性。
The ink material comprises a UV curable screen printing ink which contains a resinous binder, a hardener, and a fine particulate filler.
油墨材料包括可uv固化的网印油墨，所述网印油墨含有树脂粘合剂、硬化剂和微粒填料。
UV curable powder paints, UV curable waterborne paints, hybrid UV curable paints, dual curing system, UV equipments and et al are described.
介绍了光固化粉末涂料、水性光固化涂料、混杂光固化体系、双重固化体系、光固化设备等。
The development trends of UV curable waterborne coatings and UV curable powder coatings were summarized, and its application was also illustrated.
认为开发水性紫外光固化涂料、紫外光固化粉末涂料是目前紫外光固化涂料的发展趋势。介绍了光固化涂料的应用情况。
UV curable polyurethane acrylates (UVPUA) were prepared, and the synthesis process and cured films were monitored by Fourier Transform Infrared (FTIR).
合成了可uv固化的聚氨酯丙烯酸酯，并利用傅立叶红外光谱对其合成过程及固化涂膜进行了表征。
The paper gives an overview on characteristics, applications, markets and technical developments of modified acrylic, anaerobic and UV curable adhesives.
概述了丙烯酸酯胶粘剂的特点、应用、市场状况及技术进展。
UV curable materials as a polymer matrix and a nematic liquid crystal with positive dielectric anisotropy are mixed and sandwiched between ITO coated glass substrates.
混合紫外光固化的聚合物基质和具有正介电各向异性的向列相液晶，并将混合物注入到以ito玻璃为衬底的液晶盒中。
An UV curable corrosion resistant coating consists of an epoxy-base monomer, combined active diluents with hydroxy groups, combined photoinitiators, an adhesion promoter.
所研究的UV固化防腐蚀涂料包括环氧类的单体，带羟基功能团的复合稀释剂，复合光引发剂和粘附力促进剂。
The results of indicated that the proportion of epoxy acrylic acid ester is the most important element influencing on the emulsification property of UV curable offset ink.
研究结果表明：环氧类丙烯酸酯的含量是影响UV胶印油墨乳化性能的重要因素。
The curing rate of both the free radical and cationic UV curable coatings are accelerated with the rise of temperature, and the former's cure speed is higher than the latter.
V自由基固化和阳离子固化的固化速度随温度的升高而加快，并且自由基的固化速度大于阳离子固化速度。
The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent, photoinitiator and pigment.
采用双酚A环氧丙烯酸酯（EA）和聚氨酯丙烯酸酯（PUA）共混，加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
Although the use of paint need to be considered to get the best results, however, solvent-based and UV curable inks can also be in non-coating materials to achieve a successful output.
尽管涂料需要加以考虑使用以获得最佳效果，然而溶剂型和UV固化油墨也能够在非涂布材料上实现圆满输出。
The optimal formula of the UV curable conductive adhesive gained from single factor test was as follows: Silver-plated copper powder 70%, complex photoinitiator 4%, AIBN 2% and KH570 2.5%.
通过单因素实验确定了导电胶的最佳配方：镀银铜粉填充量为70%、复合光引发剂用量为4%、热引发剂aibn用量为2%、偶联剂KH570用量为2.5%。
UV curable multi-crosslinking waterbrone polyurethane paint for wood is developed by introducing UV curing procedure, organosilicane crosslinking modification and multifunctional chain-extender.
通过UV固化和有机硅交联改性及多官能度扩链剂的引入，研制了多重交联UV固化水性聚氨酯木器涂料。
The relationship between the photoinitiator composition of the UV curable leather finishing agents, monomer, auxiliary agent and the apparent performances of coating film for leather was studied.
研究了UV固化皮革涂饰剂的光引发剂、光活性单体、助剂与皮革力学性能及表观性能的关系，并对皮革表面微观性能及透气度进行了表征。
The applicable effects of waterborne and solventborne UV curable leather finishing was compared and the micro-morphology of leather was observed and the air permeability was accurately calculated.
对比了水性与溶剂型UV皮革涂饰剂在皮革表面的应用效果，并对皮革表面微观性能及透气度进行了表征和计算。
Conventional UV-curable inks tend to be more aggressive, bonding to a slightly greater surface area.
传统的UV固化墨水比较强烈的，能够作用到大一点基材区域。
The selection of primer, and the influences of UV-curable resin and monomers on the properties of top coat were discussed.
讨论了底漆的选择，以及光固化树脂和单体对面漆性能的影响。
Because of the rapid curing rate and big volume shrinkage, UV-curable coiling coatings are generally of bad adhesion to metal substrate.
紫外光固化涂料由于固化速度快、体积收缩大，故通常存在与金属基材附着力差的问题。
The influence of UV-curable ink on attenuation of colored optical fiber has been examined.
考察了紫外光固化光纤油墨及其组分对着色光纤光衰减的影响。
The UV-curable inks have been afforded more and more for their efficiency, economy, energy-saving and so on.
UV固化油墨因其具有环保、高效、节能等优点而得到越来越广泛的应用。
The polyester acrylate resin for UV-curable powder coatings is synthesized through the reaction of carboxyl-type polyester and glycidyl methacrylate (GMA).
通过羧基型聚酯和甲基丙烯酸缩水甘油酯(GMA)反应合成了紫外光(UV)固化粉末涂料用聚酯丙烯酸酯树脂。
应用推荐