On the construction of coating of high quality, the best selection of domestic or imported flat mouth suction type spray gun.
关于涂装质量要求较高的施工中,最佳选用国产扁嘴虹吸式或进口喷枪。
The effects of coating materials and spray welding processes on quality control of spray welded coating are thoroughly investigated in this paper.
本文深入研究了涂层材料、喷熔工艺对喷熔涂层质量控制的影响。
Meanwhile, the application of electrostatic spray coating on CVT and ct was narrated.
同时还介绍了静电喷塑涂层在CVT和CT上的应用情况。
The results show that: (1) By observing the powder particles deposited on the substrate of the state, the spray particles melt in a way to form a deformation and coating mechanism.
实验结果表明:(1)通过观察粉末粒子沉积到基体上的状态,解释了喷涂粒子的熔化、变形及涂层成形机理。
On this basis, the paper established a model for predicting the plasma spray coating quality under different process parameters.
在此基础上建立预测模型,对不同工艺参数下等离子熔射层进行质量预测。
Based on practice, characteristics of coating resin for spray-up process are discussed in this paper.
本文根据生产实践,讨论了喷涂用胶衣树脂所应具备的特性。
The effects of pretreatment for powder coating on the galvanized steel sheet were investigated through tests of cryslalography, film weight and salt spray test, and the existing process was improved.
对一种用于汽车和通讯行业的新型预磷化镀锌钢板的粉末喷涂前处理工艺进行了研究,通过晶相、膜质量及盐雾试验,对预磷化板的现有工艺进行了改进。
This paper described characteristics of some float on-line post -processing technology, including on-line coating, figuring, toughening, spray, print and opal.
介绍了几类浮法玻璃在线深加工的工艺特点,包括在线镀膜、压花、钢化、喷涂、印刷及乳化等。
The smoothness of coating film formed depends on the feature of the paint, performance of the painting equipment and working conditions of the spray booth.
漆膜的光滑性由涂料的特性、喷漆设备的性能和喷漆室的工况所决定。
At the same time, the effects of the coating solvent, DBP, PEG-400, coating level, spray rate, air temperature and pan speed on the drug release character are investigated.
同时,考察了包衣溶剂、DBP、PEG- 400、衣膜增重、喷雾速度、包衣温度和包衣锅转速对药物释放的影响。
The research progress and application of preparing coating on substrate of materials by means of wire exploding spray coating (WESC) is reviewed in this paper.
综述了电爆喷涂技术在材料表面制备涂层的研究进展和应用。
Based on research on available electrostatic spray painting equipment, grid electrode used as high voltage electrode for electrostatic coating on food surface.
在研究已有的静电喷涂装置基础上,采用栅网电极作为食品表面静电涂敷高压电极。
In order to keep the original European style, the contractor designed the renovation plan of spray granite-like coating on the old finish.
广播大楼原外墙面为水刷石面层,为了不破坏原有的欧式风格,改造设计方案是在旧水刷石面层上喷涂外墙真石涂料。
The influential regulation of rare earth on the properties of spray coating is studied by adding rare earth to the self - fluxing Nickel based alloys powder.
通过在镍基自熔合金粉末中添加微量稀土,研究了稀土对喷焊层性能的影响规律。
Electrostatic atomization has been expanded into foreland research fields such as combustion, spray coating, preparation of anonym film and so on.
静电雾化目前已扩展至燃烧、静电喷涂、纳米、薄膜制备等前沿研究领域。
3 spray is a surface treatment method of plastic powder coating on the part of the.
喷塑就是将塑料粉末喷涂在零件上的一种表面处理方法。
Various performance tests (neutral salt spray, metallic coating binding force) about rhodium plating on different substrate metal material were also studied.
同时通过中性盐雾实验、镀层结合力测试,研究和比较了不同基材上铑镀层的性能。
The mixing proportion of WC and matrix metal, the grain size of WC, the composition and hardness of the matrix and other factors on wearability of the spray welding coating are discussed in the paper.
本文重点研究了碳化钨与粘结金属的配合比例、碳化物颗粒的粒度、粘结金属的组织成分及其硬度等因素对喷焊层耐磨性的影响,并初步得出某些因素对喷焊层耐磨性的影响规律。
A thermal spray equipment for bore surface coating based on centrifugal atomization was developed, the atomization principle and particles formation process of the equipment were introduced.
研制了一种基于离心雾化原理的内孔热喷涂设备,简要介绍了该设备的工作原理和粒子的雾化过程。
The influence of WD-60 coupling agents on adhesion and salt-spray property of epoxy anti-corrosive coating were investigated.
研究了WD-60偶联剂对环氧防腐涂料附着力和耐盐雾腐蚀性能的影响,确定了WD-60偶联剂的最佳用量。
The influence of WD-60 coupling agents on adhesion and salt-spray property of epoxy anti-corrosive coating were investigated.
研究了WD-60偶联剂对环氧防腐涂料附着力和耐盐雾腐蚀性能的影响,确定了WD-60偶联剂的最佳用量。
应用推荐