YiwuGothic product model design and manufacture of handicrafts factory for 10 years, Plastic Mould Manufacturing experience.
义乌市哥特工艺品厂有10年的产品模型设计制作，塑料模具制造经历。
The design model, as defined by RUP SOMA, is the core output work product from service realization.
由RUPSOMA定义的设计模型，是服务实现的核心输出工作产品。
A current banking client is using the FS-IDM model to guide in the design of target financial product management services as part of a cooperative project with the banking Center of Excellence.
我们当前的一个银行客户使用FS - IDM模型来指导设计工作，以将目标金融产品管理服务作为与BankingCenter of Excellence合作项目的一部分进行集成。
A very successful methodology used to model the actual or potential users of a product, or suite of products, is Interaction Design (IaD) — see Resources, [4].
一个非常成功的用于对实际或潜在的产品，或一套产品的用户建模的方法是交互设计(Interaction Design,IaD)—参见参考资料，[4]。
As design decisions are made, it is important to capture their essence, including what effects they will have on the product under development and its model-based representation.
随着设计决策被制定下来，记录它们的特性是重要的，包括它们对未开发完的产品及其基于模型的表现会有什么效果。
Based the generalized locating principle and the decomposition and reconstruction principle, the theoretical model of product design automation is developed and the software system also achieved.
基于广义定位原理及分解重构等理论，构造了产品自动化设计理论模型，并进行了软件系统的实现。
Wooden body master model made by this process can completely meet demand of product design department, construction of body master model is proper and manufacturing period short.
采用该方法制造的车身木质主模型，完全满足产品设计部门的要求，其结构合理，制造周期短。
It is proved by an example that this model can be used to improve product quality greatly and has practical application in quality design for product.
实例计算证明，该模型具有实际应用价值，利用其进行产品质量设计可以使产品实现质优价廉。
The influence of virtual reality technology on mechanical product development is analyzed and a method to design virtual model of gear-box based on VRML is presented.
分析了当今虚拟现实技术对开发机械产品的影响，提出了利用VRML构建齿轮变速箱虚拟模型的基本方法。
This paper offers the architecture and functions of the system and also offers the operation model of the product design in network.
并且具体给出了系统的结构体系和功能体系以及网络环境中产品设计的运行模式。
To quickly and effectively build product model, at the same time can obtain higher design efficiency.
快速有效地建立产品的模型，可以在相同的时间获得更高的设计效率。
The assembly tolerance analysis and optimization method based on digital product design model is put forward according to the analysis of digitalization preassembly method.
通过对数字化预装配方法的分析，提出了基于数字化产品设计模型的装配公差分析和优化方法。
The paper analyzes the characteristics and organizing requirement of concurrent engineering, and advances an organizing model for concurrent product design.
分析了并行工程的特征和组织需求，提出了面向并行工程的产品设计组织模型。
An interactive model of product virtual design based on virtual reality technology was presented.
提出以虚拟现实技术为核心的互动式产品虚拟设计模型。
Considered the relationship among failure modes, a failure risk evaluation and optimization method for mechanical product design scheme based on knowledge model was proposed.
考虑失效模式间的关联性，提出了一种基于知识模型的机械产品设计方案失效风险评估与优选方法。
In this article, we modify the mathematical model for design of single product batch plants and present a heuristic procedure, including equipment sizing and process synthesis.
本文修正了单产品间歇化工过程设计的数学模型并提出该问题的启发算法，该算法包括设备尺寸计算与过程综合。
Based on the quantity model, the traditional methods could not analyze the product disassembling in a conceptual design.
传统的方法基于定量模型，无法在概念设计阶段分析出产品的可拆卸性。
Product design evaluation methods were introduced, and the mathematical model and evaluation steps of fuzzy evaluation were described detailedly.
介绍了产品设计评价的方法，并详细描述了模糊评价法的数学模型和评价步骤。
Finally, an engineering application example of the model about control upon using components during the product design is given.
最后给出了产品设计过程中模型在元器件选用控制方面的工程实例。
Results show that the conceptual design model of mechanical product based on polychromatic sets can be described and reasoned with formal method, and programmed easily.
研究表明，基于多色集合理论建立的机械产品概念设计模型易于形式化描述和推理，方便计算机编程。
In consideration of cost and whole life loss expectation of product, the whole life optimization design model with control parameter of dynamic reliability is proposed.
在同时考虑产品成本价值和全寿命期失效损失期望前提下，提出了以动态可靠度为控制参数的全寿命优化设计模型。
Then the fuzzy multi-objective decision methods and mathematics model of product project based on virtual design simulation for product life-cycle were expounded.
在此基础上提出了虚拟环境下生命周期产品设计方案模糊多目标决策方法和数学模型。
Gives a model of the information communion of the stylist and user and the meaning analysis of product shape design. On this base this paper put forward the model of product shape design.
给出了设计师与使用者信息交流模型和形态设计语义分析过程模型，并在此基础上提出了产品形态设计的过程模型。
Then we discuss structure technique of the product model relating to rapidly built-up design system and search into automatic assembly of product.
对快速组合设计中产品模型的构造技术进行了讨论，研究了产品结构自动装配的实现方式。
Aimed at the traits of modular technology in product rapid design, we put forward a theory of establishing modular product information model.
针对面向产品快速设计的模块化技术特点，提出了建立模块化产品信息模型的思想。
Based on product green design, this paper proposes the product recycling design economic analysis model to assure the equilibrium of costs and benefits at the recycling stage.
立足于产品的绿色设计，构建了产品再回收设计的经济性分析模型，以保证产品在回收处理阶段的成本与收益之间的均衡。
The tolerancing process and its characteristics were studied based on the product conceptual structure design automation technology. A four layer product tolerance model was put forward.
在产品概念结构设计自动化技术基础上，研究了产品公差设计过程及其特点，提出了四层产品公差结构模型。
Based on the study of product design and product design process, the parameter surface model for supporting the product design process dynamic management is established.
在研究产品设计和产品设计过程的基础上，建立了支持产品设计过程动态管理的参数面模型。
Summary:The product performance way has very much, includes according to them in the product design different stage: Effect chart, model.
产品表现的方式有很多，按照他们在产品设计中的不同阶段有：效果图，模型。
Summary:The product performance way has very much, includes according to them in the product design different stage: Effect chart, model.
产品表现的方式有很多，按照他们在产品设计中的不同阶段有：效果图，模型。
应用推荐