• The silver halide fibers were made by means of hot extrusion.

    采用挤压法成型制备出卤化多晶光纤

    youdao

  • Figure 1 shows the male die of a hot extrusion planar combined die.

    1所示冲压平面结合模具简图。

    youdao

  • The inaction ways of the hot extrusion die of the valve stem have been analyzed.

    叙述气门顶杆挤压模失效形式。

    youdao

  • Bruce suggested: hot die steel including forging, hot extrusion and die-casting of steel.

    布鲁斯建议热作模具钢包括锻压挤压压铸模具钢。

    youdao

  • Hot extrusion is the advanced production process for high-performance austenitic stainless steel pipes.

    挤压优质高性能奥氏体不锈钢管材先进生产工艺

    youdao

  • According to metal plasticity flow theory and design methods, a new hot extrusion process was proposed.

    根据金属塑性流动理论设计方法提出新的挤压工艺

    youdao

  • The hot extrusion process of magnesium alloy MB2 material with the asymmetric casing forgings has been studied in the paper.

    结合对称锥形壳体零件,研究镁合金材料MB2挤压成形工艺

    youdao

  • So, in hot extrusion process, how to reduce wear and improve die life is one of the most concerned problems for mold designer.

    因此挤压过程中如何减少磨损、避免局部磨损过大设计人员关心问题之一。

    youdao

  • The present paper describes the experimental investigations on the hot extrusion of sponge, electrolytic and HDH titanium powders.

    海绵粉、电解钛粉以及氢化脱氢钛粉进行了粉末挤压实验研究

    youdao

  • The vanishing of texture during annealing was related with the recrystallization in deformed elongate grains which survived the hot extrusion.

    分析退火对热成形组织及织构的影响,确定了< 110 0 >织构消失残余形变晶粒再结晶的联系

    youdao

  • ZHANG Hong-liang. The fundamental research of hot extrusion process for powder metallurgy molybdenum tube[D]. Taiyuan: Taiyuan University of Technology, 2010.

    [9]张宏亮粉末冶金挤压工艺基础研究[D]。太原:太原理工大学,2010。

    youdao

  • A new processing technique for seamless tubes manufacture of austenitic stainless steel is introduced, in which hollow cast blank is directly used for hot extrusion.

    介绍了一种新的奥氏体不锈钢无缝管材制备工艺空心直接压制备荒管。

    youdao

  • Vacuum carbothermal reduction of N2 -atomized 316l powders and effects of green compact density on hot extrusion and properties of extruded products were investigated.

    研究氮气雾化316L真空还原烧结规律挤压密度挤压工艺和挤压材性能影响

    youdao

  • The hot extrusion resulted in that the distribution of the whiskers was along the hot extrusion direction, and the mechanical properties of the materials were improved.

    此外,挤压变形导致沿挤压方向排列,提高材料力学性能

    youdao

  • This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.

    采用三维弹塑性有限元法对克式万向节挤压成形过程进行数值模拟分析

    youdao

  • The size of the die and the calculation method of hot extrusion force were presented, and the design of reshaping die, extruding hole die and hot extrusion die was introduced.

    给出了坯料尺寸挤压力计算方法整形挤孔模、热挤压模的设计了介绍

    youdao

  • The results indicate that high energy ball milling together with low temperature quick hot extrusion is the most effective method for obtaining homogenous distribution of reinforcers.

    采用高能法混料低温快速挤压工艺相结合,实现增强体颗粒均匀分布有效方法

    youdao

  • Extrusion force is a very important craft parameter in hot extrusion, and its value was obtained mainly from experienced formula, especially the formula for pipe material was not established.

    挤压工艺挤压力非常重要参数,目前主要采用估算的方法获得数值没有针对管状材料经验公式

    youdao

  • A new processing technique for seamless tubes manufacture of austenitic stainless steel is introduced in the present work, in which die casted hollow blank is directly used for a hot extrusion.

    介绍了一种新的奥氏体不锈钢无缝管材制备工艺空心直接压制备荒管。

    youdao

  • During conventional hot extrusion processes, temperature and distortion of the billets change unevenly, so the dimension, shape, organization and capability of the profile will be deterioration.

    常规铝及铝合金挤压过程中金属温度变形很不均匀的,这导致产品的尺寸形状组织性能等质量方面的缺陷。

    youdao

  • Form and dimension may also be achieved by a number of alternative processes such as hot or cold extrusion, sand casting, die casting, and precision casting.

    形式尺寸可以通过其它一些可选工艺达到比如挤出挤出加工,沙模铸造拉模铸造,精密铸造。

    youdao

  • The results reveal that the microstructure of the AZ91 alloy is effectively refined after hot-extrusion.

    研究挤压比对热挤压AZ91镁合金显微组织和拉伸性能影响。

    youdao

  • The bimetallic seamless steel pipes are successfully manufactured with a hot-extrusion process in Tubacex, Spain.

    西班牙挤压成型钢管公司采用热挤压工艺成功地生产出双金属无缝钢管

    youdao

  • The rod is made of the particulates by vacuum hot press and thermal extrusion.

    采用真空热压技术热挤压技术,颗粒制成了试验棒材,测试了材料的力学性能。

    youdao

  • The equipments, processes, excipients in common use and influence factors as well as applications in pharmaceutical fields of the hot-melt extrusion technology are reviewed.

    综述了熔融挤压法的设备、特点、工艺过程常用辅料影响因素,并工业药剂学上的应用进行了概述。

    youdao

  • Product plan: adopt laser sintering hot-extrusion to manufacture the inlet and outlet valve seat of auto engine.

    产品方案:项目产品采用激光烧结挤压高新工艺技术生产汽车发动机排气阀座

    youdao

  • Objective: To assess if the hot melt extrusion (HME) technique enhances the dissolution of hydrophobic drugs.

    目的研究热熔挤出技术是否提高难溶性药物溶度。

    youdao

  • While manufacturing a hot-extrusion die made of RM-2 hot working die steel, quenching cracks was found during the quenching process.

    制造热挤压模具过程中,所用的模具钢rm - 2淬火过程中发生了淬火开裂

    youdao

  • Biomass pellet fuel production technology mainly has two ways, one is a hot compression extrusion molding technology, the other is a high pressure cavity forming technology.

    生物质颗粒燃料生产技术主要两种方式压缩挤压成型技术,一种是高压模腔成型技术。

    youdao

  • Biomass pellet fuel production technology mainly has two ways, one is a hot compression extrusion molding technology, the other is a high pressure cavity forming technology.

    生物质颗粒燃料生产技术主要两种方式压缩挤压成型技术,一种是高压模腔成型技术。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定