The software FLUENT and its application to flow field simulation were briefly introduced.
简要介绍FLUENT软件,回顾其在流场计算中的应用。
Finally, experiments are performed to testify the flow field simulation results of FTX polygon.
最后本文对六棱柱元件的流场模拟计算结果进行了实验验证。
It showed that the melt filled length could be forecasted through the flow field simulation, with an error 7.
结果表明,通过流场模拟的方法可以预测组合流道在挤出过程中的熔体充满长度,其误差为7。
The study item designs two-set experimental devices for small-sized vertical and circular wind tunnel system and flow field simulation.
本研究项目设计了小型立式环型风洞系统和流场模拟两套实验装置。
On the basis of flow field simulation, the effect of different types of nozzle structure on the flow patterns are calculated and examined with water model experiments.
在此基础上模拟计算了几种不同形式的水口对流动形态的影响,并用水力模型试验进行了验证。
In the research of water hydraulic technology, flow field simulation is done by the method of Fluid-Solid coupling, leading to the pressure nephogram and velocity vector of the pump model.
在水压技术理论研究方面,应用流固耦合理论对水压齿轮泵进行了二维流场的仿真分析,得出了其流场压力云图和速度矢量图。
The parallel computation method was used for numerical simulation of flow field with moving boundary, and unstructured moving grids were generated by spring analogy method.
将并行计算方法应用于含运动边界流场的数值模拟,采用弹簧方法生成非结构运动网格。
Simulation of turbulence atomization jet in the air-water two phase flow field was performed.
对水在空气中湍动雾化射流的气液两相流场进行了数值模拟。
Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
采用数值模拟方法,对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
The revised model based on flow units was further validated by cross-sectional reservoir simulation models in selected areas of the field.
在选择区域范围内根据油藏横截面模拟模型能进一步确认流动单位校正模型。
Finally measurement of the flow field in the rotating disk with a five-hole probe is demonstrated feasible by the numerical simulation.
最后,通过数值模拟预测了在该旋转盘试验中是可以用五孔探针对流场进行测量的。
Presents the demands for indoor environment of the injection workshop, air conditioning design and energy saving design. Analyses the flow field with the method of CFD numerical simulation.
介绍了该输液车间室内环境要求、空调工程设计及空调系统的节能情况,利用CFD数值模拟方法对流场进行了预测分析。
Obtained numerical simulation results of three types of pulverization chamber flow field consisting of the gas phase and discrete phase.
对三种不同结构雾化室流场进行数值模拟,获得了包括气相和离散相在内的流动特性计算结果。
The influence of liquid distributed ring (LDR) on flow field in spray scrubber of Nanjing Institute of Technology project has been analyzed by means of numerical simulation.
通过对南京工程学院湿法烟气脱硫系统喷淋塔的数值模拟,分析了液体分布环(ldr)对塔内烟气流场的影响。
Through numerical simulation, the characteristics of goaf flow field and gas transportation under J-shape and U-shape ventilation systems were analyzed.
通过数值模拟,对比分析了J型通风和u型通风条件下的采空区流场及瓦斯运移特征。
Numerical simulation of the flow field around the oscillating ideal flat plate is presented to assess the aerodynamic derivatives.
提出了一种数值模拟振动的理想平板绕流场,并提取其气动导数的方法。
Numerical simulation of flow and temperature field in the test tube of Model Loop Wax Deposition Apparatus was performed.
对模型环道蜡沉积装置测试段流场温度场进行了数值模拟。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
The in furnace flow field characteristics of a large sized boiler were studied by way of experimental measurements and numerical simulation.
通过实验测量和数值模拟研究了大容量锅炉的炉内流场特性。
The accuracy of the simulation model is verified by inlet duct steady flowing pressure tests on test benches, and then flow field distribution in inlet ducts is analyzed.
在用气道稳流试验台验证了仿真模型的准确性后,分析了进气道内部的流场分布。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize processing design.
在CAE系统中,对铸件进行流场和温度场的模拟,以便校核和优化工艺设计。
The influence of bit cutting teeth and its jet nozzle on the flow field is taken into account in the simulation.
模拟中考虑了钻头的切削齿和射流喷嘴对流场的影响。
With respect to the numerical simulation of the flow field of a novel Venturi air register incorporating an inlet swirler proposed is an analytical model along with a processing method.
针对带入口旋流器的新型文丘利调风器流场的数值模拟,提出了一种分析模型和处理方法。
The comprehension of MHD control of flow field is grown on further from another angle by numerical simulation of Hartmann flow.
通过对哈特曼流动的数值模拟,从另一个角度进一步加深了对MHD控制流场的理解。
The numerical simulation of the unsteady flow field around an oscillating airfoil is difficult because of the complexity of turbulence models and numerical methods.
准确数值模拟机翼动态失速时非定常流场主要有湍流模型和数值算法两方面的难点。
This paper aims at the study of 3D numerical simulation of the groundwater flow field of the Changzhou-Wujin district, for revealing the main cause of the depression of the ground surface.
通过研究常州-武进地区地下水流场的3维数值模拟,揭示了该地区产生地面沉降的主要成因。
Analysis of numerical simulation is used on flow field and temperature field in mechanical seal cavity.
对机械密封腔内流场和温度场进行了数值模拟。
Nowadays, the research for inner flow field in runner still depends on the observation and analysis for velocity and pressure distribution obtained from numerical simulation.
目前,转轮内流场的研究还只是基于通过数值模拟对速度场和压力场进行观察和分析,但对于各种分离流动机理性研究还做得不够深入。
The numerical simulation for the three dimensional turbulent flow field of multiply jets mixing with a confined crossflow in cylindrical duct is presented in this paper.
对多股射流与圆柱管中的横流湍流混合的三维流场进行了数值模拟。
At last, the feasibility of the numerical simulation computing about this model is analyzed simply through investigating if the flow-field equations in this model are closed.
最后,通过对该理论模型中流场方程的封闭性研究,简单分析了进行数值模拟计算的可行性。
应用推荐