This paper presents the parametric equations on stress concentration factor(SCF) of completely overlapped tubular joints under axial loading using experimental and numerical analysis.
通过试验和数值研究推导了完全叠接管节点试件在轴向力作用下应力集中因子的参数方程。
Finally, the mechanism of crack resistance and strength reinforcement was discussed based on the experimental and numerical analysis. Also a hybrid effect factor formula was suggested in this paper.
最后，本文在试验研究与数值模拟分析的基础上，探讨混合纤维的阻裂和增强机理，提出了本文建议的混合效应系数计算公式。
Characteristics of wave propagation in grouted rockbolt were investigated with numerical simulation, experimental measurement and theoretical analysis.
用理论分析、数值模拟和实验测试的方法研究了自由锚杆和锚固锚杆中的波传播特性。
The stator structure feasibility is verified using the numerical analysis and experimental results.
数值分析与实验结果证实了振子结构的可行性。
Based on academic analysis of the jet configuration, the general plan was designed. Using the numerical simulation program and the explode testing system, an experimental plan was established.
通过对大孔径射孔弹射流特征的理论分析，提出总体设计方案，利用数值模拟和爆轰测试进行优化设计确定实验方案。
Theoretical analysis, numerical calculation and experimental study are tarried out for this kind of antenna, by use of the theory of two-dimensional periodic admittance surface.
本文对上述天线应用二维周期导纳表面理论进行了初步的理论分析、数值计算和实验研究。
Theory analysis, numerical simulation and experimental result indicated that the surface electric field of the device was more uniform and the breakdown voltage was increased effectively.
理论分析、数值模拟和实验结果表明，该结构可以使表面电场变得更加均匀，有效提高器件击穿电压。
Theoretical analysis on the Taylor impact of five practical materials shows that the analytic results are in agreement with the experimental and numerical.
利用该理论对五种具体材料进行分析，结果表明，解析结果与试验结果及数值分析结果吻合较好。
The numerical and experimental methods presented in this study can provide some reference for the design and analysis of metallic TPS.
所提供的数值分析和实验方法可为金属热防护系统的分析与设计提供重要的参考价值。
Analytical solutions, numerical results and dimensional analysis are summarized and compared with experimental data in the paper.
对分析解，数值结果和量纲分析进行了归纳并与实验数据进行了比较。
This paper briefly describes a kind of hybrid method combining the experimental and numerical techniques for structural analysis.
本文简要地介绍一种结构分析的实验和数值相结合的混合解法。
In this paper, theoretical analysis, numerical calculation and experimental are used to study the coupling effects of ultra-wide spectrum electromagnetic pulse to the hole.
本文从理论分析、数值计算和实验三个不同角度出发，研究了超宽谱电磁脉冲对屏蔽体贯通孔的耦合规律。
A two-dimension simulation code SHMG for the nonintercepting gridded electron gun design is presented in this paper, the numerical analysis model and the experimental results are also described.
主要介绍一个二维无截获栅控电子枪计算机模拟计算程序SHMG，及其关键数值分析模型和实验分析结果。
Theoretical analysis, numerical simulation as well as the experimental investigation are presented and discussed.
给出了这一方法的理论分析、数值模拟以及实验研究。
Simulations of charge neutralization using Monte-Carlo and current neutralization process using numerical analysis have been done, and explanations of experimental results have also been made.
用蒙特·卡洛法及数值解析法对电荷中和、电流中和过程进行了模拟计算并解释了实验结果。
Its theoretical analysis was made and the numerical simulation of the analysis agrees with experimental results.
理论分析的数值模拟与实验结果一致。
The relative computation analysis and numerical simulation were completed on the basis of experimental data, and the result of simulation is agreement with the practical observation result.
依据实验结果进行了有关计算与数值模拟，所做模拟结果与实际观测结果相吻合。
Theoretical analysis and numerical calculations are presented and the results coincide with experimental observations.
进行理论分析和计算，结果与实验相符合。
Both the numerical analysis and experimental data show that the fatigue crack propagation rate is insensitive to the stress ratio for plain stress thin specimens.
实验结果和模拟结果都表明，该试样厚度下，应力比对裂纹扩展速率几乎没有影响。
The results of numerical analysis were compared and shown in good agreements with those obtained by spectral-domain analysis methods and experimental results.
其数值结果与谱域法结果和实验结果均比较一致。
The analysis of impact responses and the prediction of impact damage have been carried out. Good agreement can be observed by the comparison of the experimental results with the numerical ones.
这个算法可用于分析任意构形的冲击物对任意构形的复合材料层状结构低速冲击的响应．用该算法分析了层板的冲击响应，并预报分层损伤．预报的损伤与实验结果基本符合。
The key parameters of the experimental controlling have been confirmed by theoretical analysis and numerical simulation. The electrodes and the permanents are flush mounted on the cylinder surfac…
通过理论分析和数值模拟确定了实验控制的关键参数，实现了电磁力消涡和增涡的连续控制，电磁力作用下的圆柱绕流的分离点可以在前驻点和后驻点之间变动。
The key parameters of the experimental controlling have been confirmed by theoretical analysis and numerical simulation. The electrodes and the permanents are flush mounted on the cylinder surfac…
通过理论分析和数值模拟确定了实验控制的关键参数，实现了电磁力消涡和增涡的连续控制，电磁力作用下的圆柱绕流的分离点可以在前驻点和后驻点之间变动。
应用推荐