This error in position is proportional to the depth of water, and is independent of the size of sand particles.
这个误差和水深成正比而和泥沙颗粒的大小无关。
The line and column number of the error position in the textual XML document.
XML文档中错误位置的行号和列号。
The results show that the error of estimated value of both throttle position sensor and manifold pressure sensor are less than 10%, and the strategy put forward in this paper is valid.
结果显示,大部分工况下进气压力传感器和节气门位置传感器的信号重构误差可控制在10%以内,表明了所提出的调节策略是切实有效的。
This paper analyzes the sources of effecting the error of the accuracy in electrohydraulic position servo system, and carries out quantitative analysis and calculation to main factors.
本文从工程实际出发,分析了影响电液位置伺服系统精度误差的来源,并对各主要因素作了定量的分析计算。
With a preallocated Runnable object and a separate scope, you should always be in a position to report a problem without using any memory in the context the error occurred.
通过一个预先分配的Runnable对象和一个单独的作用域,在错误发生时,您就应该总是能够报告问题,而无需使用任何内存。
Position prediction algorithm is introduced to compensate the position error in the sampling time, or the extra torque ripple would be produced.
针对采样周斯内的位置误差会引起电机额外的转矩波动,本文引入了位置预测算法。
Construction should be fully prepared, the construction section of the pile position to find accurate. Lofting should be accurate, the error in the specified range.
施工准备应充分,施工路段桩号位置找准确。放样应精确,误差在规定范围内。
In this paper, author studies the position error-compensating control problem of cutting process by using the classical control theory.
本文作者运用经典控制论对切削过程的位置误差补偿控制进行了研究。
The grinding principle of crankshaft journal is introduced, the formation reason of position error is analyzed in detail, and the corresponding measures are proposed as well.
介绍了曲轴连杆轴颈磨削的原理,对其常见的位置误差现象的形成原因进行了分析,并提出了相应对策和办法。
This section is the core of the article, mainly in four aspects, namely combat error's characteristics, classification and the position of the combat error and its criminal responsibility.
该部分是文章的核心内容,主要包括四方面内容,分别是打击错误的特征、分类、打击错误在错误论中的定位及其刑事责任。
Simulation results show that the position error of the integrated navigation system is less than 15% (RMS) of goal error over long intervals, and even smaller in the area with evident anomaly gravity.
仿真结果表明:该组合导航系统长时间定位误差小于导航系统目标误差的15% (RMS),在重力异常显著变化地区其定位误差将更小。
And electric steady also is introduced to estimation of rotor position, which solves effectively the problem of big error on rotor position estimation in process of dynamic.
同时将电气稳态的概念引入转子位置估计中,有效地解决了电机在稳态情况下转子位置估计误差大的问题。
The armature-reaction in a sensorless brushless DC(SLBLDC) motor causes detection error of rotor position and consequently leads to advanced or lagged commutation.
无刷直流电机电枢反应造成反电势法无传感器控制中的转子位置检测误差。
The paper has proved theoretically and verified statistically by sampling that the distribution of the position error in arbitrary direction is Rayleigh Distribution.
本文从理论上证明并抽样统计验证了任意方向位置度误差服从瑞利分布;
The results of the simulation analysis show that position measurement error in system can be decreased and the system dynamic performances are increased by the algorithm.
仿真分析表明,该算法有效地降低了系统位置测量误差,提高了系统动态性能。
The profile error is the item which applies widespread but difficult to measure and evaluate in country standard and international standard of the components shape error and position error.
轮廓度误差是零件形位公差国家标准和国际标准中应用广泛而又难于测量和评定的项目。
Provides meaningful position information in error messages.
在错误信息中给出有意义的位置信息。
Due to the inherent hysteretic nonlinearity, the giant magnetostrictive actuator (GMA) can cause position error in the open-loop systems, and cause instability in the closed-loop systems.
由于内在的滞回非线性,超磁致伸缩驱动器(GMA)会在开环系统中引起定位误差,在闭环系统中造成系统不稳定。
In outline recognition, to reduce the misjudge result from calculated error of the core position, reference frame transform and second derivative of curve were adopted.
轮廓识别采用坐标变换及曲线求二阶导数,避免了果核位置判断误差造成的误判。
The paper probes into the way of developing tourism souvenir in Jinhua from the aspects of fixed position, existed error-zone and future development.
本文从旅游纪念品的定位、误区、开发等方面探讨了金华旅游纪念品开发之路。
In flying height measuring method utilizing light intensity interference principle, the position control of micro flying head has effect on measuring error.
基于强度干涉原理的飞高检测方案中,微型飞行头位姿控制是影响测量误差的一项关键因素。
The series control with the velocity loop and the position loop is an effective design method in the electro-optical tracking system which requires short respond time and little tracking error.
在光电实时跟踪系统中要求响应的时间短、跟踪误差小,采用速度环和位置环的串级控制是一种有效的设计方法。
Element position error, mutual coupling between elements, and the difference in frequency responses of receiver channels influence directly the performance of array radar signal processing.
阵元位置误差、阵元间互耦的影响、接收机通道的频率响应的差异都直接影响着雷达阵列信号处理的性能。
In the simulation test, the position error and velocity error of maneuvering targets was seen to be reduced greatly. It indicates that the adaptive adjustment of maneuvering frequency is effective.
仿真实验表明,通过对频率自适应调整,使机动目标的位置、速度估计误差明显减小。
In the perpendicular direction to the rotation axis of the petal, the repeat position error is most sensitive to the position error of the locking force.
在对接面内与旁瓣转轴方向相垂直的方向上,重复定位误差对锁紧力位置误差最为敏感。
In the end, the fund concluded that Mr Strauss-Kahn had not abused his position, but he accepted their view that he had made "a serious error of judgment".
国际货币基金组织的最后结论是,卡恩没有滥用职权,但他们认为他做出了“一个严重的错误判断”,而卡恩也接受了这一观点。
The error factors that influence data accuracy are proposed in both production and inspection. The method of the data error reduced and position accuracy of the foundation geographical...
指出了生产和检查中应注意的影响数据精度的误差因素,提出了减小数据误差、提高基础地理信息数据的位置精度的方法。
With the application of mixed position closed-loop system in the high-speed precise laser sub-marker, the response has been increased greatly and constant error has been decreased.
将混合位置闭环系统应用于高速精密激光内雕机中,大大提高了系统的响应性,减少了系统的稳态误差。
Analyses show that a measurement of 5 points altitude in the free flight path, the impact position error may be estimated probably.
分析表明,在自由飞行段5点测高可以估出落点偏差。
Act as routine dispose signal estimation route to, recursion least square method possess in a position to at approximate time bring relative comparison small error.
作为常规的处理信号估计的方法,递归最小二乘法具有能够在估计的时候产生相对比较小的误差。
应用推荐