However, you don't need to boot the emulator each time you rebuild your application-typically you only need to boot at the start of a session and keep it running.
无论如何,你不需要每次重新生成你的应用程序的时候都重新启动模拟器,通常情况下你只需要启动一次并让它保持运行即可。
The first boot runs only once and writes its results into a file, to avoid a second start.
首次引导只运行一次并把它的结果写到文件中,从而避免第二次启动。
That would potentially enable computer makers to build machines that boot up almost instantly, as the information needed to start up the machine could be stored in fast memory, said Dr Franzon.
“计算机制造商将会能够利用这种装置来让计算机瞬时启动,因为启动需要的信息是存在这种快速存储中的。”弗兰从博士这样说。
All PC systems start the boot process by executing code in ROM (specifically, the BIOS) to load the sector from sector 0, cylinder 0 of the boot drive.
所有的PC系统都是通过执行rom(明确地说,BIOS)中的代码从引导磁盘的0柱面0扇区加载扇区,从而开始引导过程。
In fact, I was working flawlessly at the terminal, did critical system modifications such as auto-mounting local hard drives on start-up, creating a Pagefile, and changing the GRUB boot menu.
实际上,我用得还相当上手,我会做一些关键的系统改进,比如电脑启动时自动加载本地磁盘,创建页面文件,改变GRUB的启动菜单等。
Start by taking a look at initial boot time and memory consumption of Apache Geronimo.
首先查看一下ApacheGeronimo的初始引导时间和内存消耗情况。
Finally, you need to start the SSHD process and configure it to execute at boot time.
最后,您需要启动sshd过程,并对其进行配置,以便在启动时执行。
This should set up all the required files, and the distcc daemon (distccd) should be living in /etc/init.d/distccd for a nice automatic start on boot.
该过程将安装所有需要文件,distcc 新进程(distccd)应该在 /etc/init.d/distccd 目录中,在启动机器时可以自动启动该进程。
To change this, boot into Windows and enter Advanced system Settings in your start menu search.
为了改变这一状况,启动进入Windows,在你的开始菜单搜索进入高级系统设置。
As stated at the start of this article, all boot loaders work in a similar way to fulfill a common purpose. But LILO and GRUB do have a number of differences.
如本文开始处所述,所有引导加载程序都以类似的方式工作,满足共同的目的。
Setup actually allows one to specify which services you want to start and to bring up on boot.
Setup实际上允许指定希望在启动时启动和调出哪些服务。
Code from a boot loader such as LILO, which locates the kernel, loads it, and executes it to start the boot proper.
来自加载程序,比如LILO的代码,该加载程序定位、加载并运行内核以开始正常引导。
You now be able to boot up you Lift app, launch the Flex app, click the "subscribe to 'notifications'" to start the Notifier Actor and subscribe to the Consumer to the notifications destination.
你现在可以启动你的Lift应用了,启动Flex应用,点击“Subscribeto‘notifications’”启动NotifierActor并为消费者订阅名为“notifications”的目的地。
Listing 6 shows how to install PostgreSQL and make sure it will start on boot.
清单6展示如何安装PostgreSQL并确保它将在系统引导时启动。
Normally the xend service is set to start at system boot, so you don't have to do this every time.
通常,xend服务被设置为在系统启动时启动,所以不必每次都这样做。
At the end of this line add acpi=off noapic, press return and B to start the boot process.
在此行末尾加上acpi=off noapic,按回车及B键进行启动。
When you start the Welcome Center for the first time after boot, you see the license agreement shown in Figure 3 (text and graphical modes are both shown).
在引导后第一次启动欢迎中心时,您会看到如图3所示的许可协议(包括文本和图形模式)。
All of the needed software is configured to automatically start up at boot. So check to ensure that all the software is up and running.
所有所需的软件都已配置为开机时自动启动,所以必须检查确保所有的软件都已启动并运行。
In other words, the boot sequence won't start until the correct password is provided.
换句话说,除非给出正确密码,否则引导系列过程不会启动。
This will allow the kernel to auto-start your RAID volume at boot-time, as well as allow you to create a root RAID filesystem if you so desire.
这将允许内核在引导时自动启动raid卷,如果您愿意,您还可以创建一个raid根文件系统。
Boot / Start-Up: For fiveminutes the power consumption was polled on each system as it performed a coldboot followed by idling at the desktop (automatic log-in) for the remainder ofthe time.
启动:在每台系统上我们将会查询从开始冷启动到闲置在桌面(自动登录)的五分钟内的功耗。
The Linux kernel uses this information to auto-detect and start up RAID arrays at boot time, so you should make sure that every RAID volume you create is configured to do this.
Linux内核使用这些信息在引导时自动检测并启动RAID阵列,因此您应确保对您创建的每个 RAID卷进行了这种配置。
If you are running XDM, for example, you'll be presented with your login screen on boot-up; then start a GNOME or KDE session.
例如,如果正在运行xdm,那么在启动时会出现登录屏幕;然后启动GNOME或KDE会话。
Now that the heartbeat configuration is complete, set heartbeat to start at boot time on each of the directors.
现已完成heartbeat配置,对heartbeat进行设置,使其在每个控制器的引导阶段启动。
In the end, many scripts are executed serially to start the various services that are required (which you can typically see as part of the boot screen with Linux).
最后,串行执行大量的脚本以启动各种需要的服务(通常可以在Linux的引导屏幕中看到)。
Note that kernel_execve is the function used to start the init process at boot time and does not use the usermode-helper API.
请注意kernel_execve是在启动时开启init进程的函数,而且未使用usermode - helper API。
Boot up T3, connect the VLZ3 to your computer's sound card, and start recording straight away with a host of creativity-inducing loops, samples, and plug-ins.
开机的T3,连接vlz 3计算机的音效卡,并开始录制马上与东道国的创造力诱导循环,样品,和插件。
When the bzImage (for an i386 image) is invoked, you begin at ./arch/i386/boot/head.S in the start assembly routine (see Figure 3 for the major flow).
当bzImage(用于i386映像)被调用时,我们从./arch/i386/boot/head.S 的start汇编例程开始执行(主要流程图请参看图3)。
How do I use the Startup Manager to improve the start up speed (boot time) of my computer?
我如何使用启动管理器,以提高我的电脑的启动速度(启动时间)?
How do I use the Startup Manager to improve the start up speed (boot time) of my computer?
我如何使用启动管理器,以提高我的电脑的启动速度(启动时间)?
应用推荐