• Having the slant of a bevel.

    具有斜面倾斜特点。

    youdao

  • Add Bevel and Emboss and Gradient Overlay.

    添加斜面浮雕渐变叠加

    youdao

  • Bevelan angular type of edge preparation.

    坡口——一种角度型式边缘制备

    youdao

  • It used bevel gears to transmit power to the prop.

    使用锥齿轮转交权力交给道具。

    youdao

  • The bevel is cleaned and the dimensions are correct.

    清理完成尺寸正确。

    youdao

  • Bevel and Emboss layer styles add 3d effect on our shape.

    倾斜浮雕花纹风格添加3d影响我们形状

    youdao

  • Beveled-entry driveway. Bevel dimensions can be specified.

    入口倾斜车道指定倾斜的尺寸

    youdao

  • The damaged bevel and pipe ends are identified and repaired.

    损坏管端及坡口已发现并修复。

    youdao

  • After that, select Bevel and Emboss and just follow the image below.

    之后,选择斜面浮雕只是按照以下的形象

    youdao

  • Bevel gears can be mounted at standard, 90, 180 or 270 degree mounting.

    锥齿轮可以采用标准位置,90、180度270度位置安装

    youdao

  • Again, draw smaller circle shape. Add Bevel and Emboss and Gradient Overlay.

    同样圆圈形状添加斜面浮雕渐变叠加

    youdao

  • The bevel milling cutter for cutting groove of oil casing - pipes was designed.

    设计了用于油气田管道坡口切割角度铣刀

    youdao

  • Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.

    锥齿轮齿面上层薄均匀的红铅油,然后转动齿轮数圈。

    youdao

  • You will also learn about the use of the Taper object, Fillet option and Bevel function.

    了解锥度对象圆角选项斜角功能使用

    youdao

  • Draw a rounded rectangle on the opposite side. Add Inner Glow and Bevel and Emboss.

    上绘制一个圆角矩形对面添加发光斜面浮雕

    youdao

  • When ordering bevel gear actuators, specify mounting position as second line information.

    如果是订购锥齿轮执行器,请第二增加安装位置信息

    youdao

  • These drive the central propeller shaft through bevel reduction gears with a 2:1 reduction.

    这些驱动器中央螺旋桨通过减少锥齿轮2:1减少。

    youdao

  • Top view of bevel headed, hexagonal head set screw. Selection box represents thread diameter.

    六角螺钉俯视图。选择代表螺纹直径

    youdao

  • Effects, such as shadow, glow, soft edges, and bevel, can also be accessed from the Format TAB.

    效果选项包括阴影发光羽化倾斜可以直接使用格式选项卡。

    youdao

  • All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

    所有阀门可以配置手轮链轮锥齿轮手轮和链轮。

    youdao

  • Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.

    进入变速箱万向节连接中心传动轴内部锥齿轮

    youdao

  • Just one more question, when select the letter I can't use 3d - extrude and bevel because it aint active.

    只要再问题选择不能使用3d-挤压因为是不活跃。

    youdao

  • Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.

    如果采用正齿轮(SGA)复合伞齿轮(BGA)附件,则可以1显示的各个位置安装手轮。

    youdao

  • Then I made a few more details in order to have more realistic close-ups - I added a Bevel modifier to wall's edges.

    接着进一步渲染一些细节以便接近真实的效果——墙壁边缘增加个轮廓编辑

    youdao

  • Operate and maintain finishing machines to grind, drill, sand, bevel, decorate, wash or polish glass or glass products.

    操作维护整理,沙化,装饰清洗抛光玻璃或玻璃制品

    youdao

  • Select the horseshoe shape using the poly tool and bevel it the entire length of your wall looking at the photo if needed.

    马蹄形状选择工具使用整个长度照片如果需要的。

    youdao

  • Duplicate shape we have just created. Remove all layer Styles used. Set Fill layer to 0% then add layer Style Bevel and Emboss.

    重复形状我们刚刚创建的。删除所有图层样式使用填充设置0%,然后添加图层样式斜面浮雕

    youdao

  • Duplicate shape we have just created. Remove all layer Styles used. Set Fill layer to 0% then add layer Style Bevel and Emboss.

    重复形状我们刚刚创建的。删除所有图层样式使用填充设置0%,然后添加图层样式斜面浮雕

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定