它也被用作酵母去发泡剂。
采用发泡剂ak制作了硅橡胶海绵。
Blowing agent AK was used to preparing silicone rubber sponge.
制得了以水作发泡剂的聚醚型聚氨酯鞋底原液。
Two components of the polyether polyurethane systems with water as blowing agent are prepared.
探索了放热型发泡剂与碳酸氢钠混用的分解热效应。
Decomposition enthalpy of blowing agents mixed with sodium bicarbonate is probed.
以自制复合型蛋白质为发泡剂，制备泡沫混凝土砌块。
The foam concrete block was prepared by self-made compound protein foam agent.
研究了发泡剂AK用量对硅橡胶硫化速率和发泡速率的影响。
The influence of contents of blowing agent AK on the curing rate, blowing rate of silicone rubber were discussed.
对用分子氧催化氧化联二脲制取ADC发泡剂进行了探讨。
The preparation of ADC foaming agent from biurea by dioxygen catalytic oxidation was investigated and discussed.
本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。
The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.
但废盐酸循环使用对adc发泡剂的生产会产生一定的影响。
However, cyclic utilization of waste hydrochloric acid has certain effects on the production of azodicarbonamide (ADC) foaming agents.
以建筑石膏、水泥为原料，采用复合发泡剂发泡制成墙体材料。
Wall body material has been made by using hemihydrate gypsum, cement and composite foamer.
由特殊树脂，加上发泡剂、防火剂、成碳剂以及颜填料等组成。
It consists of special resin, foaming agent fire-proofing agent, carbonic agent, pigment and filler.
简要介绍硬质聚氨酯泡沫塑料的发泡剂选择和改进阻燃性的方法。
The selection of blowing agent and the method of modifying fire retardance of rigid polyurethane foams were briefly introduced.
随发泡剂用量的增加，环氧基发泡材料的力学性能存在临界转变点。
With increasing the volume of vesicant, the mechanical properties of epoxy foam material had a critical transit point.
以建筑石膏为原料，采用松香类复合发泡剂发泡制成石膏保温材料。
Using hemihydrate gypsum as main raw materials and frothing by gum rosin composite vesicant to produce gypsum heat preserving material.
采用PVC树脂和木粉加入发泡剂制得PVC/木粉发泡复合材料。
The foamed PVC/wood-flour composite(WPC) was prepared from PVC and rice husk powder with blowing agent.
探讨了发泡剂AC在PP中的发泡过程和泡孔在PP中的长大过程。
We discussed the process of AC foaming agent's expansion and cell's growth within PP.
另一个需要从事的研究是选择何种“绿色”发泡剂，以及如何实践它。
Another research for us to pursue is what to be selected as "green" blowing agent and how to practice it.
用SKC-2000型光透过式粒度分布测试仪测试发泡剂ADC粒度。
The grain size of foaming again ADC can be tested with SKC-2000 grain size testing instrument.
文章研究了泡沫复合体系中发泡剂、稳泡剂和碱对复合体系稳定性的影响。
The paper studied the effect of different foamer, foam stabilizer and alkali on foam stability in foam combination system.
介绍了合成硬质聚氨酯泡沫塑料的主要原料，包括主体成分和发泡剂、泡沫稳定剂等；
The main materials to such as isocyanate, polyol, blowing agent and foam stabilizer et al, prepare rigid polyurethane foam are introduced.
并探讨了几种添加剂对发泡剂H ，发泡剂AC ，发泡剂OBSH的分解温度的影响。
Meanwhile several additives affect on decomposition properties of blowing agent H, blowing agent AC, blowing agent OBSH is inquired into in this article.
本文探讨了分散剂、超声波分散时间、搅拌取样等因素对发泡剂AD C粒度测试值的影响。
This paper probes into the influences of such factors as dispersing agent, ultrasonic dispersion time, and stirring sample on the value of the grain size of foaming agent ADC.
讨论了稳定剂品种、 改性剂品种和发泡剂用量对制品密度、泡孔结构以及外观表面的影响。
The effect of certain types or contents of stabilizers, modifies and blowing agents on extrudate quality density, surface, and cellular structure are described.
以PE作为载体树脂，加入发泡剂AC、成核剂、包覆体制备出高性能PP用微孔发泡母粒。
Took PE as the carrier resin, joins foaming agent AC, nucleating agent and wrap agent, manufactured high performance foaming masterbatch which used for PP.
探讨了聚酯多元醇、泡沫稳定剂、发泡剂及催化剂等原料对硬质聚氨酯泡沫塑料制备的影响。
The influence of some raw materials such as polyester the uniformity vesica nt foams and catalysts to the preparation of rigid polyurethanes foam is also discussed.
探讨了聚酯多元醇、泡沫稳定剂、发泡剂及催化剂等原料对硬质聚氨酯泡沫塑料制备的影响。
The influence of some raw materials such as polyester the uniformity, vesicant foams and catalysts to the preparation of rigid polyurethanes foam is also discussed.
探讨了聚酯多元醇、泡沫稳定剂、发泡剂及催化剂等原料对硬质聚氨酯泡沫塑料制备的影响。
The influence of some raw materials such as polyester the uniformity vesicant foams and catalysts to the preparation of rigid polyurethanes foam is also discussed.
找出了发泡剂为氟里昂- 11的聚醚基浇注型聚氨酯硬泡沫塑料上述弹性性质的经验公式。
The experience formulas for the above-mentioned elastic properties of a moulded PUR foam of polyether base blown by F-11 are presented here.
找出了发泡剂为氟里昂- 11的聚醚基浇注型聚氨酯硬泡沫塑料上述弹性性质的经验公式。
The experience formulas for the above-mentioned elastic properties of a moulded PUR foam of polyether base blown by F-11 are presented here.
应用推荐