时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
该调度系统可以较好地解决两流薄板坯连铸连轧流程的动态调度问题，进一步优化生产组织。
This system can solve the dynamic schedule problem of two-strand thin slab casting and rolling and optimize production management.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
Schedule rules for two-strand thin slab casting and rolling were established.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
薄板坯连铸连轧工艺热过程数字化正是这个软件的重要组成部分。
Therefore the digital model on heat transformation process of CSP is vitally component of this software.
介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
如何获得优质空心管坯使其能够满足在铸态下直接轧制的要求，是实现空心管坯连铸连轧，即管材近终形制造技术的关键。
To produce hollow tubes, which can satisfy the requirements of direct rolling in casting conditions, is the key to realize continuous casting-direct rolling of hollow tubes.
分析了连铸连轧铝坯的组织和性能特点。
The structure and properties of continuous cast rolled aluminium stocks were analysed.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
组织超细化是导致薄板坯连铸连轧流程V微合金钢强度提高的主要原因。
The main reason for strength increase of V microalloyed steel is ultra-fine microstructure in TSCR process.
本文就薄板坏连铸连轧生产热轧TRIP钢的可行性进行了分析和讨论。
In the present article, the feasibility of the production of hot rolled TRIP steels using TSCR process was analyzed.
薄板坯连铸连轧的产品特点是晶粒细小、强度高、钢质纯净、性能均匀，适宜生产各种高强度钢板。
The characteristics of products from CSP process are small grain, high strength, clean steel, even properties. The process is suitable to produce high strength steel plate.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
简要分析了连铸连轧圆管坯表面缺陷的类别和形成原因，提出了改进圆管坯质量的措施。
Types of and causes for the surface defects of the CC round billet for pipe - rolling with mandrel mill are analyzed, and quality improvement measures proposed.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
有色金属的连铸连轧、连续铸轧是典型的高效、节能、短流程加工技术。
The continuous casting rolling technology for nonferrous metals is a typical high efficiency, energy saving and short process method.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
本文主要从中薄板坯连铸连轧的特点出发，对中薄板坯连铸连轧的产品品种进行了分析。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
应根据薄板坯连铸连轧生产钢种的不同要求，对转炉—薄板连铸连轧生产工艺流程进行合理的优化，提高产品质量，扩大生产品种。
The production techniques on the Converter-CSP process should be optimized according to the different requirements for the various steel grades, therefore, to improve the p.
介绍连铸连轧法试制电解电容器用铝质负极箔的工艺研究过程。
We hereby give a brief introduction of the process using continuous casting& rolling method to produce aluminum cathode foil for electrolytic capacitor.
本钢薄板坯连铸连轧生产线在调试生产阶段，精轧机F3多次出现轧裂卡钢停产事故。
The Finishing mill F3 repeatedly occurs accidents of rolling crack and stopping steel plate in debugging production stage of thin slab concasting and conrolling production line in Bengang.
对哈兹列特工艺在铝板带连铸连轧应用中若干问题进行了探讨。
Various problems in the application of Hazelett process to continuous casting and rolling for aluminum plate and strip are discussed in the article.
本文是国家科技部重大专项课题“长材连铸连轧生产线”(课题号：2001 BA 306b03)的一部分。
This dissertation is a part of the important and special project 'long products continuous casting and rolling line '(Item No. : 2001ba306b03) sponsored by Ministry of national science and technique.
薄板连铸连轧工艺是钢铁工业的重大变革技术，要切实掌握和逐步推广。
The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
推荐使用美国哈兹·列特连铸连轧工艺生产铝箔坯料所需的热轧带。
Hazelett continuous casting followed by in-line hot rolling with tandem mills is recommended for producing good quality foil stock of aluminum.
推荐使用美国哈兹·列特连铸连轧工艺生产铝箔坯料所需的热轧带。
Hazelett continuous casting followed by in-line hot rolling with tandem mills is recommended for producing good quality foil stock of aluminum.
应用推荐