此方法不是通过存储描述代码建立参数模型。
The method does not uses storage of expression sequence to generate parametric model.
在本文中，作者建立了翅片式蒸发器的分布参数模型，用以模拟结霜过程。
In this paper, the distributed parameter model of a finned evaporator is established to simulate the frosting process.
这两种方法的共同点是都是通过建立目标运动的参数模型，获得目标的运动状态估计，从而实现目标跟踪。
Both tracking methods achieve the target tracking state in common by establishing the motion parameter model and obtaining the motion state estimation of the target.
建立了结霜工况下空气源热泵集中动态参数模型，将结霜过程分解成密度项的累计和霜层厚度项的累计。
Establishes a dynamic lumped parameter model for air cooled heat pump under frosting condition. Divides frosting course into accumulation of density and frost thickness.
针对上述问题，本文首先通过传输线理论建立了机车用电缆的分布参数模型，以及变频调速牵引电机的高频等效电路。
In allusion to the problems mentioned above, firstly, the paper models the distribution parameter circuit of the cable and the high frequency circuit of motor through the transmission theory.
本文在粘弹性材料三参数模型的基础上建立了塑料齿轮接触问题的计算方法。
A calculation method of contact problem of plastic gears based on three parameters model of viscoelasticity material is presented.
以r22为制冷工质，根据质量守恒、动量守恒和能量守恒等热力学基本定理建立了空调冷凝器的稳态分布参数模型。
From basic thermophysical laws, a steady distributed parameter model of an air-conditioning condenser was constructed, in which R22 was taken as working fluid.
根据磁流变阻尼器阻尼力特性的试验结果，建立了非线性参数模型。
A nonlinear parameter model is proposed to describe the dynamic performance of a magnetorheological (MR) damper according to its experiment results.
建立了二维轮胎橡胶材料的有限元模型，用应变能密度这个参数模拟了试样承受单向拉伸时裂纹的扩展方向。
A 2-d finite element model of tire-rubber was established to simulate the crack growth of the sample under simple tension, by using the strain energy density parameter.
最后采用指示模拟的方法建立了研究区的沉积微相模型，并以此模型为基础建立了研究区的储层参数模型。
The facies model and reservoir model of the study area were built up by using lots of indicators.
以某水面舰艇为研究对象，利用径向基函数神经网络算法和标况下的水池实验数据，建立了基于航速、航向角和海情自适应变化的船舶横向运动非线性参数模型。
An intelligent model for a ship's horizontal motion, which can self-adapt with navigating speed, ocean condition and course, was established based on the Radial Basis Function (RBF) neural network.
本文结合黑龙江省科技厅的攻关项目，建立球磨法制备超细石英粉体的工艺参数模型并进行优化。
This article is based on the item of science and technology office of heilongjiang province, and a process parameters model is built and optimized.
再通过设计辨识实验得到系统参数，用于建立控径系统的参数模型。
Then I have obtained system parameters through the design of identification experiments, which can be used to establish the parameter model of the pulling speed control diameter system.
提出了一种用神经网络技术构造激光切割加工工艺参数模型和建立加工参数自动选取系统的方法。
This thesis put forward a method to build the laser cutting parameters model and set up the automatic select parameters system with artificial neural networks technology.
本文首先采用基于逆向工程的特征和约束的方法来构建脚模曲面，建立脚模特征参数模型。
Firstly, based on feature and restriction in the Reverse Engineering, construct all-purpose surface of feet and found parameterized model.
本文基于传热单元法，建立了冷凝器的稳态分布参数模型。
Based on the, a steady state distributed parameters model was put forward in the numerical simulation of refrigerant circuitry in condensers in this paper.
本文首先对行波传输理论进行了分析，借鉴变压器波过程的理论，建立了互感器分布式参数模型，并利用EMTP仿真软件对模型进行了仿真分析。
The theory of traveling wave transmission is analyzed in the paper. The model with distributed parameters has been set up and verified by EMTP simulation tests.
本文进一步分析了参数模型的建立对测量数据的要求，并初步给出了测量数据减缩的标准。
The demand for RCS data used in the parameter model and a standard for RCS data simplification is roughly concluded.
本文根据质量守衡、能量守衡、动量守衡原理，建立了房间空调器绝热毛细管的分布参数模型。
In this paper, a distributed parameter model of room air-conditioner adiabatic capillary was developed, on the basis of mass-energy conservation and momentum conservation.
作者基于神经网络，建立了分布参数模型对应的简化模型。
The author built up simplified models corresponding to distributed parameters models utilizing ANN.
从水平定向钻进的工程实际出发，借助于现场钻进数据库，建立了自然参数模型，给出了相应的钻孔轨迹预测算法。
A natural parameter model to forecast the direction of the actual borehole based on the local drilling database in practical situation is studied.
我们运用流体网络理论，建立了三参数单元的侧支体外循环集中参数模型。
A three element model of lumped parameter in peripheral extra corporeal circulation of an animal has been proposed and set up according to the fluid network theory.
根据双端固定音叉谐振器的动力学原理，建立了其参数模型。
According to the description of the dynamic of the double-ended tuning fork micro-resonators, the system level universal parameter model is built.
方法：（1）模型建立：以相关的电学参数模拟血液动力学参数，以电路图（电路模型）分析的方法建立血液动力学理论模型。
Methods: (1)Model establishment: The hemodynamic model based on electrical circuit analysis was established by simulating hemodynamic parameters with electrical ones.
在定义盲参数的基础上，建立了环境健康风险评价的盲数模型。
By defining the model parameters as blind Numbers, a model with blind parameters was established for water environmental health risk assessment.
然后以此砂体模型为相控制条件，建立储层物性参数模型。
Taking this sand body model as facies-controlling conditions, a reservoir property model was proposed.
前言：基于磁流体微扰动“失稳”的原理，建立了钢焊丝脉冲GMA焊最佳熔滴过渡形式的参数模型。
In this paper, a variable model of optimum droplet transfer mode for pulsed GMA welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.
前言：基于磁流体微扰动“失稳”的原理，建立了钢焊丝脉冲GMA焊最佳熔滴过渡形式的参数模型。
In this paper, a variable model of optimum droplet transfer mode for pulsed GMA welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.
应用推荐