扫描复合文档、递增修订号和应用惟一的文档号都会增加响应时间和影响可伸缩性。
Scanning for compound documents, incrementing the revision number, and applying unique document Numbers all increase response times and affect scalability.
重点关注这样的服务水平性能指标:能够帮助预测构建复合应用程序时的端到端响应时间和计划服务器容量。
Insist on service level performance metrics which help predict the end-to-end response times and capacity planning of servers when the composite application is built. Look at the other aspects like.
可以使用这些工具提供WebSphereProcessServer环境中部署的复合服务的可用性和响应时间报告。
These can be used to provide an availability and response time report of the composite services deployed on a WebSphere Process Server environment.
对于复合web服务调用,多个条代表每个端点的响应时间。
In the case of a composite Web service invocation, multiple bars represent the response time of each endpoint.
当该蛋白质复合物正常发挥作用时,它使这些受体退回到神经细胞内-在此这些受体无法接受或响应有利突触生长的信号-在合适的时间内。
When the protein complex is working properly, it moves the receptors back inside the nerve cell - where they can no longer receive and respond to the pro-growth signal - at the appropriate time.
应用有限元数值计算方法,分析了复合路面在移动荷载下的动力响应问题。
The dynamic response question of composite pavement under moving load is analyzed by using the finite-element numerical calculation method.
并用一种新方法求取了该振动系统的复合频率响应函数。
The complex frequency response function of the vibrating system is obtained by means of a new method.
通过有限元分析,计算出了受力情况最恶劣时的响应,得出了应力分布情况,并根据复合材料强度理论判断其强度是否满足条件。
The stress distribution can be got by the analysis of Finite Element Method, then judging whether the material has failed by the failure criteria of composite material.
根据复合材料力学,建立了弯曲条件下复合梁的分析模型,并导出了相应的应变响应关系。
On Basis of composite mechanics, an analytical model of composite beam under bending is established and the corresponding deformation response is formulated.
系统采用前馈-反馈复合算法,其中反馈采用模糊-PI算法,利用算法提高系统的响应速度,增大系统的控制带宽。
Arithmetic employs feed-forward control and feedback control to accelerate system response and improve control bandwidth in which feedback use fuzzy-PI arithmetic.
结果表明,PP/硅灰石复合材料的力学性能对振动参数的响应并不是单调增加,而是存在一个最佳的响应范围。
The results showed that the response of mechanical properties of PP/wollastonite composite to vibration parameters was not in a monotony increasing trend but an optimum responding range.
非标志着全握橡胶复合大底的动力学响应。
Non-marking Omni-Grip rubber compound outsole with Kinetic Response.
提出了一种新的计算弹性-粘弹性复合结构随机响应的各阶谱矩的计算方法,它是一种时域复模态分析方法。
In this paper, a new method of calculating random response spectral moments of elastic-viscoelastic combined systems under random excitations is presented.
利用三维有限元分析方法模拟了人体头部与复合材料层板发生柔性撞击时的整个动态响应过程。
The whole dynamic response process of the flexible impact between the human head and the composite material veneer is simulated using the3D finite element analysis method.
目的研究人体膝关节股骨-胫骨复合体模型在人体体重冲击下的运动力学响应特点及膝关节软骨关节面在载荷传导中的缓冲作用。
Objective To study the biomechanical response and the role of articular surface on the femur-tibia model under impact loading of the body weight.
利用该模型分析了复合材料宏观弹塑性应力-应变响应以及细观几何结构特征对宏观弹塑性性能的影响。
With the model, macroscopic stress-strain responses are studied and micro-structural geometry effects on macroscopic elastoplastic properties are analyzed.
利用动力接触分析方法模拟冲击的接触行为,提出了一种新的计算复合材料层板低速冲击响应的有限元模型。最后给出一个算例。
By using a dynamic contact analysis, a finite element model is developed to calculate the response of composite laminates to low velocity impact. A numerical example is given.
在对此复合系统设计闭环控制器时需要确定合理的期望响应特性。
So the anticipant system's responding characteristic should be appropriately determined when designing a closed loop controller for the decoupled system.
针对梯度功能压电复合材料球壳热弹性响应提出了简单而精确的近似解。
A simple and accurate approximate solutions of thermoelastic responses of functionally gradient piezoelectric composite spheres is developed.
提出了一种新的计算弹性-粘弹性复合结构随机响应的各阶谱矩的计算方法,它是一种时域复模态分析方法。
In the analysis of reliability of system under random excitations, the spectral moments of response are very important parameters.
综述了高导热系数的快速热响应复合材料及可控热膨胀系数复合材料的研究进展,并介绍了热适应复合材料在电子器件散热领域的应用。
This paper reviews the research progress of rapid thermal response composite materials with high thermal conductivity and composite materials with controllable coefficient of thermal expansion.
本文用混合杂交单元分析复合材料层板的瞬态动力响应。
In this paper a mixed hybrid-stress element is applied to analyzing transient response of layered composite plates.
结果显示模糊pid复合控制和模糊自整定PID控制均有较好的动静态响应特性,其中模糊自整定PID控制的效果最优。
From these results, both fuzzy PID control and fuzzy tune PID control have good control characteristic. The control characteristic of fuzzy tune PID control is best.
用TEM、IR、TG、XRD 等方法对复合微球进行了表征并测试了复合微球的磁响应性。
The microspheres were characterized by IR, TEM, TG and XRD and their magnetic response property was tested.
作为辅助问题,首先考虑了单根纤维嵌在无限大基体的特殊情形,导出了纤维和基体中随时间变化的应力场。其次,应用平均场方法给出了任意时刻复合材料的总体响应。
As an auxiliary problem, the special case of a single fiber embedded into an infinite matrix is considered firstly, and the time dependent stress in the composite at any time is given.
建立以定压力生产的异常高压复合无限大气藏压力响应公式,并根据此公式给出产量变化公式。
The equation of pressure behavior has been established for composite infinite gas reservoir of anomalous pressure in the condition of constant pressure, and we apply it to obtain the equation of rate.
复合酶酶解条件的优化采用响应面法。
Optimum hydrolysis conditions of mulriple enzymes were investigated with response surface method.
然而,用回传波射矩阵法对结构进行模态分析以及用于层合复合材料框架结构动力响应的研究尚未见报道。
However, the studies on vibration modal analysis of frames by means of the MRRM and transient dynamic response of frames made of laminated composite beams have not been reported yet.
通过响应面分析法得到了的具有最佳抗氧化性的复合天然抗氧化剂,其各成分比例为30:60:20:1:2。
The optimum ratio of GE, PE, PC, Vc and CA was 30:60:20:1:2, and it was obtained by response surface methodology.
通过响应面分析法得到了的具有最佳抗氧化性的复合天然抗氧化剂,其各成分比例为30:60:20:1:2。
The optimum ratio of GE, PE, PC, Vc and CA was 30:60:20:1:2, and it was obtained by response surface methodology.
应用推荐