This current source is programmable using a single wire interface to one of 128 levels.
这是可编程电流源采用单线接口，128个级别之一。
The 2-wire interface is a widely used Master, multi-slave protocol using a serial clock (SCL) and a serial data line (SDA).
此2线接口是一个广泛使用的主机、使用串行时钟（SCL）和串行数据线（SDA）的多从机协议。
You can wire any reference of one component to any other component, provided the component's interface matches the interface required by th reference.
如果组件的接口与引用所需的接口相匹配，那么可以将一个组件的任何引用连接到任何其他的组件。
A runtime wire is a collection of invocation chains; there is one invocation chain per method in the business interface.
运行时连接是一个调用链集合；业务接口中的每个方法都有一个调用链。
Wire the mediation component interface to the primitive input terminal and wire the primitive output terminal to the mediation component reference as shown in Figure 7.
将中介组件接口连接到元素输入终端，并将元素输出终端连接到中介组件引用，如图7 所示。
Wire the mediation component interface to the primitive input terminal and wire the primitive output terminal to the mediation component reference, as shown in Figure 18.
将中介组件接口连接到元素输入终端，并将元素输出终端连接到中介组件引用，如图18所示。
The interface of the reference at the source of the wire must match the interface of the target component.
连线的源端的引用接口必须与目标组件的接口相符。
In the first Add Wire dialog, click Yes to create a matching interface.
在第一个AddWire对话框中，单击Yes以创建一个匹配的接口。
These give us, respectively, an interface definition language, a wire format, and a type system, all of which are platform neutral.
它们分别为我们提供了一种接口定义语言、一种有线格式(wire format)和一个类型系统，所有这些都是与平台无关的。
Add the interface map to the assembly diagram (Figure 17) and wire it between the FlatFileInboundInterface export and the DelimiterDataHandler import as shown below.
将接口映射添加到组装关系图(图17)并用其连接FlatFileInboundInterface导出和DelimiterDataHandler导入，如下所示。
An add Wire information message tells you the export interface will be added to the interface map.
一条AddWire信息消息将告诉您导出接口已添加到接口映射。
The add Wire dialog box, which you see in Figure 26, opens so that you can choose to create an interface mapping or add the appropriate interface to the import.
此时会打开如图26所示的AddWire对话框，以便您可以选择创建接口映射，或者向该导入添加适当的接口。
Ok, now that we have our interface created and our outlets hooked up, let's head back over to MonoDevelop to wire everything up.
好的，现在我们创建好了界面了，outlets也挂接好了，让我们回到MonoDevelop把一起串在一起。
Open the mediation flow editor for Mediation1 and wire the send operation in the export (represented by the Orders interface) to the send operation in the import (represented by the OrdersPartner).
打开Mediation1的中介流编辑器并将导出(由Orders界面加以表示)中的发送操作连接到导入(由OrdersPartner加以表示)中的发送操作。
By using a graphical interface, the user could create forms, populate them with controls, and then wire events from these controls to create the Palm application.
通过使用图形用户界面，用户可以创建窗体，向窗体中添加控件，然后连接这些控件的事件来创建Palm应用程序。
Port2 provides the same service as port1 (same logical interface and wire format).
端口2提供的服务与端口1相同(相同的逻辑接口和有线格式)。
The other way to create an interface map is to wire a reference of one component to another component.
另一种创建接口映射的方法是将一个组件的引用连线到另一个组件。
Furthermore, you might choose to use shortcuts such as dragging the interface of a component to add a wire between two components and letting the assembly editor create the reference for you.
并且，您可能选择使用一些快捷方法，例如拖动组件接口以在两个组件之间添加连线，以及让组装编辑器为您创建引用。
STA5 subscriber line is applied to subscriber line interface of programmed control digital switches, and two wire analogy remote interface of access network.
STA5型用户板用于数字程控交换机的用户接口，也可做为各类接入网系统的远端二线模拟接口。
The system is composed of two Daisy chained crates in which there are multiple FEM modules and their interface FEMI. 128 channels of the wire signals are received and processed by each FEM.
该系统由多个机箱组成，每个机箱中有多个FEM插件和它们的接口FEMI，每个FEM接收并处理128路丝信号。
The digital serial interface can be configured for three wire operation and is compatible with microcontrollers and digital signal processors.
数字串行接口可配置用于三线式操作，并且与微控制器和数字信号处理器兼容。
The real contact area of the bond interface and the cross-sectional deformation of the bond wire were the causations respectively for the fluctuation and wholly increase of the resistance.
接头界面有效连接面积和接头上引线横截面变形量的变化分别是造成接头电阻波动性和整体增大趋势的原因。
The prestressed bumpy-ridge structure with steel wire wound is the structure that the sub parts are connected by interface bumpy-ridge effect under steel wire layers pretension.
钢丝缠绕预应力坎合结构是指在预应力钢丝缠绕层的预紧下，坎合子结构经界面坎合作用而连接起来的结构。
Basing on PROFIBUS to design electrical system of rewind wire arranging of stranded wire, the system is made up of PLC, human machine interface (HMI), dc-to-ac converter and so on.
基于PROFIBUS现场总线，设计出钢绞线复绕排线电气系统，该系统由PLC、人机界面(HM I)、逆变器等构成。
The wire feeding system realized interface with the digital welding source.
送丝系统的数字化可实现与数字化焊接电源的接口。
The wire feeding system realizes interface with the digital welding source.
送丝系统的数字化可实现与数字化焊接电源的接口。
Data from wire chamber interface Via a CAMAC system were sent into a computer for on line or off line analysis.
数据由丝室接口经CAMAC系统送给计算机作在线处理或离线分析。
Plug and socket assembly with pre-installed interface and wire seals, and manually install the connector seal, compared to the application to provide customers with lower costs.
插头和插座组件配有预装的接口和导线密封件，与手工安装密封件的连接器相比，能够为客户提供更低的应用成本， 墙的浇捣脚手架以墙的净长乘以墙高计算。
Plug and socket assembly with pre-installed interface and wire seals, and manually install the connector seal, compared to the application to provide customers with lower costs.
插头和插座组件配有预装的接口和导线密封件，与手工安装密封件的连接器相比，能够为客户提供更低的应用成本， 墙的浇捣脚手架以墙的净长乘以墙高计算。
应用推荐