It is used for data collection of the welding process parameters, analytical process and pattern display.
用于焊接过程参数的数据采集、分析处理及图形显示。
The results show the influence of welding process parameters on mechanical properties and fatigue behavior.
实验结果给出了焊接工艺参数对该铝合金力学性能和疲劳行为的影响。
Through precise control of welding process parameters, one-side welding enameled wire to copper foil is realized.
通过对焊接工艺参数进行精密控制，实现了铜箔漆包线的单面直接焊接。
The welding process parameters for the X80 steel have very important applicable value on instructing the project application.
针对X80管线钢管的焊接工艺参数对指导工程焊接具有重要的应用价值。
These models not only establish a basis for the forecasting of welding section form, but also furnish a basis in the designing of welding process parameters.
为焊缝截面形态的预测及焊接规范参数的设计提供了依据。
PLC is the core of this device, supplemented by the touch screen to set and modify the welding parameters and display the state of welding process parameters.
该设备以PLC为控制核心，辅以触摸屏进行堆焊参数的设置和修改，并实时显示堆焊过程中的参数状态；
The investigation of the relationships between weld pool shape parameters and welding process parameters may be beneficial to the quality control of CO2 welding.
在大量工艺实验的基础上，本文进一步研究了熔地形状参数与焊接规范参数之间的关系，从而为CO_2焊接质量控制奠定了基础。
The results show that the original defects can be removed with proper welding process parameters and thus we can achieve joints with smooth appearance and good properties.
结果表明：在合适的补焊工艺参数下，可有效消除接头原有缺陷，获得成形美观，性能良好的接头；
The weldability of AZ31 magnesium plate by He-Ar mixed gas tig welding was investigated. The welding process parameters for AZ31 plate with a 3 mm thickness were optimized.
探讨氦-氩混合气体保护下tig焊接az31镁合金板的可焊性，对其焊接工艺参数进行确定。
The welding thermal cycle and section dimensions of the welding seam were measured in the condition of the simulated welding process parameters for checking simulation results.
采用模拟时的焊接工艺参数进行钨极氩弧焊平板对接焊，测定焊接热循环曲线和焊缝截面尺寸，对模拟结果加以验证。
The weld shape directly influences the weld quality, so it is important to predict the weld shape or establish the mapping between the welding process parameters and the weld shape.
由于焊缝形状直接影响焊缝质量，准确地预测焊缝形状即建立焊接工艺参数与焊缝形状之间的映射关系具有重要意义。
Taking the He-Ar mixed gas as protected atmosphere, TIG welding process parameters for AZ31 magnesium alloy plates was optimized by using the method of the orthogonal experiment and variance analysis.
以氦-氩混合气体为保护气氛，采用正交试验和方差分析的方法，对AZ31镁合金板材进行了TIG焊工艺参数的优化。
The acquired data can reflect the factual welding process rightly, furthermore, the welding process can be well repeated by using the welding parameters.
采集的数据能正确反映焊接实际过程，焊接参数经还原后可实现焊接过程参数的可追溯性。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
By analysis of the establishing process of the keyhole weld pool, the regularities of the welding parameters are obtained.
通过穿孔过程分解研究，揭示出焊接工艺参数在小孔稳定建立过程中的影响规律。
Some methods used in the control of welding deformation, such as reverse deformation, system analysis, controlling process parameters and temperature field, are introduced.
同时介绍了控制焊接变形的几种方法，如反变形法、控制工艺参数、控制温度场以及系统综合分析等。
Therefore, during the welding process the welding parameters should be changed appropriately, and the welding conditions should be adjusted too.
因此在焊接过程中应该适当改变焊接工艺参数，调整焊接规范。
The demand to welding process of high-frequency welding pipe is introduced, some related parameters proposed.
介绍了高频焊管对焊接工艺的要求，提出了有关工艺及技术参数。
The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。
Therefore, it has a great significance in On-line supervision of welding process and welding quality to measure these dynamic welding parameters rapidly and accurately.
因此，快速、准确地同步测试这些动态焊接参数，对在线监控焊接过程及焊接质量有重要意义。
Mechanical property and surface quality of alloyed welding wire rod have been improved on optimizing process parameters.
通过优化工艺参数，提高了合金焊盘条性能和表面质量。
The key to a successful calculation and prediction of welding process by mathematical model method is the selecting of an appropriate model and its parameters.
用数学模型方法进行焊接过程的计算和预测，关键是选取合适的计算模型和模型参数。
An industrial PC has been used to monitor and manage the welding process and various parameters. That raises welding quality and automatic level further.
该系统还采用一台工业PC机对焊接过程及各种参数进行监控和管理，进一步提高了焊接质量及自动化水平。
The effects of the short-circuiting transfer parameters on weld formation quality in high speed CO2 welding process were analyzed.
分析了高速CO2焊接过程中短路过渡参数对焊缝成形质量的影响。
Arc welding process is a very complicated process with many interacting factors mixed together, so the transient state of welding process is related to many parameters.
电弧焊接过程是一个多因素交互作用的复杂过程，焊接过程的状态与许多参数有关。
Forming process of combustion welding rod was studied and the best parameters of forming process are following: controllability of the burning with the density of the rod 2.
通过对燃烧型焊条成型过程实验研究，得出最佳成型工艺参数：药粉密度在2。
Drop transfer in the process of MIG welding is very complicated and quality of weld line is easily impacted by welding parameters coupled with each other.
MIG焊过程熔滴过渡过程复杂，影响焊接质量的参数多，相互间耦合性强。
Drop transfer in the process of MIG welding is very complicated and quality of weld line is easily impacted by welding parameters coupled with each other.
MIG焊过程熔滴过渡过程复杂，影响焊接质量的参数多，相互间耦合性强。
应用推荐