This paper states the method of selecting and using circulating pump in hot water heating system properly to save electric energy.
合理的选择和使用热水供暖系统循环水泵，以达到节约电能的目的。
The tissue temperature responses generated from heating by a spherical thermistor probe were calculated by using a numerical method, in which different bio-heat transfer models were adopted.
采用数值方法，分析了不同生物传热模型条件下，采用热敏电阻探头加热时，生物组织中温度响应的动态特征。
In this paper, the principle, method ana viability of using laser-assisted heating to improving the machinability for tough materials are described.
本文论述了利用激光辅助加热改善难加工材料切削性能的原理、方法，以及这种加工方式的可行性。
Based on the exergy analysis on various heating systems, a comprehensive economic evaluation was developed combined with exergy and environment costs using the monetary flow method.
在对各采暖方案进行分析的基础上，结合经济成本和环境经济成本，采用流量表分析法，建立了一套综合的采暖经济性评价方法；
Using the same heat source as crystal growth, remelting and removing of solidified melt of YAG by heating inverted crucible is a efficient and safety method.
用晶体生长装置，将倒置的铱金坩埚加热，是移出其中剩余的钇铝石榴石固化熔体方便有效的方法。
This article introduces a refrigeration method using the absorption chiller energized by the district heating system instead of electricity or mechanical energy in summer in Finland.
在夏季采用区域供热系统的热量作为吸收式冷凝器制冷系统的能源，可代替电和机械能源制冷。
In the last part, using the method of annual cost, the article made analysis of solar heating system and other conventional energy system in economy as well as environmental benefits.
最后利用费用年值法对太阳能采暖系统以及其他常规能源系统进行经济性分析与环境效益分析。
A heating value feedback adjusting system was developed using the airflow heating method to measure the heating value online with air added to the gas to adjust the heating value.
利用对空气流加热的方法在线测量燃气的热值，通过给燃气加入空气调整燃气热值，设计了燃气热值反馈调节系统。
Concept and method of gluing technique using ir heating are presented. An apparatus sed for gluing anticorrosive and fire-resistant wind cylindrical cloth in the same method is introduced.
提出了红外加热胶接的思想，并对红外加热胶接技术作了简单阐述。介绍了一种红外加热胶接矿用阻燃、防腐、橡塑风筒布的装置。
Using the method of induction heating, the regulation of the variety of X70 controlled rolling steel bends'mechanics structure and mechanics property in secondary heating is investigated.
采用感应加热研究X 70控轧钢弯管二次加热力学组织、力学性能随着淬火温度、回火时间的变化规律。
The transformation point of BT22 titanium alloy was determined using calculation and continuous heating-up method.
利用计算法和连续升温金相法测定了BT22钛合金相变点。
This paper represented the measuring method in the laser heating experiments using electronic speckle pattern interferometer (ESPI).
本文叙述了在激光加热实验中应用电子散斑干涉术进行测量的方法。
Using the exergy analysis method, the conception of energy quality character was presented, which indicated the discretion of electricity, gas, coal, steam and hot water, cooling or heating load etc.
基于热力学第二定律的分析方法，按照能质系数的概念确定了电、天然气、煤、蒸汽、热水等各种形式的建筑用能及建筑物耗冷量、耗热量的能源品位高低；
Using the airflow heating method to measure the calorific value on-line, and adding air to the gas to adjust the calorific value, a calorific value feedback adjusting system was developed.
利用对空气流加热的方法在线测量燃气的热值，通过给燃气加入空气调整燃气热值，设计了燃气热值反馈调节系统。
The automatic cooling method USES mode of alternatively heating using high and low power.
本发明采用大、小功率交替加热的模式。
N. B. The using temperature of bricks should not exceed the experimental temperature of Linear Change after Heating. The above Heat-Conduction Coefficent is obtained by using flat-plate method.
本试验方法适用于电热合金随温度变化的测量，亦可用于超过电热合金使用温度范围的情况。
The said method comprises: a first phase of heating the bottom of the cooking-vessel to switching temperature (130degree) using high power (about 1000 watt);
第一阶段，采用大功率（1000瓦左右）将烹饪容器底部加 热至切换温度（130度）；
This paper describes a method for the determination of gallium in orchard leaves, sediments, soils and rocks using the L'vov platform and the maximum power heating mode.
本文介绍应用石墨平台技术和最大功率升温方式测定土壤、地质和果叶样品中镓的方法。
This paper mainly analyzed the heating effects when microwave ACTS on materials and set up an EM-Therm model using the FDTD method as the analyzing tool.
文中的主要工作是分析微波作用于材料时的加热效应并建立应用FDTD方法进行分析的电磁—热模型。
The synthesis of silicon carbide whiskers by double-heating method using carbon black and SiO_2 powder as raw materials is studied.
以炭黑和二氧化硅微粉为原料，对双重加热法合成碳化硅晶须进行了研究。
By using this method, the process of the condensation of the vapor, the cooling of the condensed water and the heating of the content at shell side can be…
可更经济合理地用单台换热实现管程水蒸汽的冷凝及其凝结水的冷却、壳程介质被加热的换热过程。
The main work can be outlined as follow:(1) The complex function method is used as a basis for the theoretical model of the space crack prevention in metal dies using electromagnetic heating.
采用复变函数方法，建立了金属模具电磁热效应空间裂纹止裂的理论分析模型。
The main work can be outlined as follow:(1) The complex function method is used as a basis for the theoretical model of the space crack prevention in metal dies using electromagnetic heating.
采用复变函数方法，建立了金属模具电磁热效应空间裂纹止裂的理论分析模型。
应用推荐