For the reinforcing soil, the soil and reinforcing materials interaction and the load-deflection relationship of the reinforcing materials can be described very well by using finite-element method.
对于加筋土，应用有限元法可以有效地分析土与加筋材料间的相互作用及加筋材料本身的应力应变关系。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
The reflection phase property and surface wave dispersion are analyzed using finite element method.
用有限元方法分析了其反射相位特性及表面波传输特性。
Finally, the torsion vibration nature frequency and torque amplitude factor of a rolling mill are calculated by using finite element method.
最后使用有限元法计算了某钢厂冷轧机主传动轴系的扭振固有频率和转矩放大系数。
By using finite element method, a pressure piping with incomplete welding flaw was analyzed in strength and assessed in safety.
采用有限元方法对一条含未焊透缺陷的压力管道进行了强度分析与安全评定。
Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.
用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
Transverse excursion process of micro drill in ultrasonic longitudinal vibration drilling is analyzed by using finite element method.
利用有限元技术对微细钻头超声轴向振动钻入横向偏移过程进行深入分析。
In this paper, the pedestal structural characteristics of vehicle-borne weapon launcher in the state of launch were studied using finite element method.
采用有限元方法对某车载武器系统发射装置的底架在发射状态时的结构特性进行了研究。
In this paper the release coefficient of residual stress of blind holes is calculated by using finite element method.
本文采用有限无法对盲孔残余应力释放测量中所需的应力释放系数进行了计算。
Theoretical calculation and discussion are presented on the dynamic characteristics of main frame of sugarcane cleaner using finite element method.
利用有限元分析的方法对甘蔗剥叶机机架的动态特性进行了理论计算和探讨。
The temperature field and microstructure field during laser heat treatment process were calculated using Finite Element Method or Finite Difference Method.
应用有限元和有限差分方法对激光热处理过程的温度场、组织场进行了数值模拟计算。
This paper gives a brief introduction of how TCA solves creep problems by using finite element method and initial-strain method, TCA's features and structure, and some application examples.
本文简要地介绍了TCA软件应用有限单元法解决弹性徐变体计算的初应变法和软件的基本特点与结构，并给出了应用实例。
However, researching on the process of CWR of hollow shaft parts is mainly to take use of experiments, even using finite element method is really few and scattered without systemic analysis.
人们对空心轴类件楔横轧过程的研究大多采用实验的方法，即使采用有限元理论也是非常零碎的，并未系统地研究空心轴类件的楔横轧过程。
A group of hybrid flexure hinges with different corner filleted radius are analyzed using finite element method, and their flexibility stress ratios are achieved.
通过有限元方法，分析了一组不同导角半径的混合铰链设计实例，并得到其柔度应力比值。
The effects of stator and rotor eccentricity on the magnetic field distributions, cogging torque and unbalanced force were calculated in this paper by using finite element method (FEM).
采用有限元法计算分析了定子偏心与转子偏心对无刷直流电动机的气隙磁场、定位力矩及单向磁拉力的影响。
This paper deals with the interaction between shear wall and its foundation using finite element method.
本文采用有限单元法对建在多层地基上的剪力墙， 基础和土进行了共同作用分析。
The modal parameters of the printed circuit board (PCB) were calculated using finite element method, and the weaknesses of PCB were found using effective modal masses and mode shapes.
采用有限元方法对印制电路板进行了模态分析，依据有效模态质量和模态振型分析了振动环境下配制电路板的薄弱环节。
The mathematical model of the molten iron ladle was established using finite element method.
本文采用有限元法建立了铁液包倾转力矩数学模型。
Using finite element method, this article presents a mathematical model and computer program for the mechanical calculation of overhead transmission lines.
本文提出了用有限元法进行架空线机械计算的数学模型和计算程序。
The stress distribution and the stress concentration factor in the welding region of tubular TT-joints subjected to axial loads are analyzed using finite element method in this study.
本文首先通过有限元分析得到了轴力作用下的TT管节点在焊接区的应力分布以及应力集中系数。
By using finite element method (FEM) and by simulating the dynamic and static frequency, the reasons of vibration are clear and then the servo structure is optimized.
通过对直线运动平台的有限元分析和动静态频率仿真，确定了刀架振动的原因，并优化了刀架的结构。
The paper studied the seismic performance of steel box bridge pier and the strengthening effect of partially concrete-filled strengthening method using finite element method.
本文在以往研究的基础上，从理论进一步分析了钢箱形断面桥墩的抗震性能和部分内填混凝土补强法补强效果。
This paper approaches the excavating dynamic behavlour and support design for a large cavern in Nanfen Iron Mine using finite element method.
针对南芬铁矿地下硐室开挖与支护设计，采用有限元分析研究大跨度地下硐室施工的动态力学效应。
A numerical simulation was performed to calculate temperature and stress distribution in K9 glass sample irradiated by pulse CO2 laser using finite element method.
利用有限元法对脉冲CO2激光辐照K 9玻璃样品中的温度和应力分布进行了数值分析。
An earthquake in Wulong possibly induced by Jiangkou reservoir impounding is analyzed by using finite element method.
本文利用有限元方法计算了武隆江口水库蓄水后可能引起的水库诱发地震。
Meanwhile, the transmitting voltage response of the transducers are calculated by using finite element method.
后又利用有限元方法计算了换能器的电压发射响应。
The sheet metal forming processes under in-plane deformation were simulated by using finite element method based on a coupled elastoplasticity with damage constitutive laws.
基于金属板材塑性变形的损伤本构关系，运用有限元数值法分析了金属薄板的面内成形过程。
Based on this point of view, a computer program to calculate the vibration of ship stern structures by using finite element method (FEM) is developed, and a sample problem is worked in this paper.
本文从这一基本认识出发，利用有限元法编制了船舶尾部结构振动计算程序，并以实船为对象进行了尾部结构振动的计算，取得了较好的效果。
Based on this point of view, a computer program to calculate the vibration of ship stern structures by using finite element method (FEM) is developed, and a sample problem is worked in this paper.
本文从这一基本认识出发，利用有限元法编制了船舶尾部结构振动计算程序，并以实船为对象进行了尾部结构振动的计算，取得了较好的效果。
应用推荐