The data communication interface.
数据通信接口。
Based on industry's Ethernet, the paper introduced the systematic hardware composition and designed the data communication interface between the system and the production control computer.
以工业以太网为基础，介绍了系统的硬件组成，设计了与生产控制计算机之间的数据通信接口。
The circuit of spectrometer used CCD for spectrum data collection, and used USB interface for communication and system's power.
该仪器的电路部分采用了线阵CCD进行光谱数据采集，采用USB接口进行通讯和系统供电。
The data communication through computer's serial interface is often involved in the design of distributing control system.
在集散控制系统设计中，经常会涉及到利用计算机串行接口进行数据通信。
The hardware design mainly includes signal detect circuit, electrical level translation circuit, microcontroller interface circuit, data communication circuit and so on.
在硬件电路设计方面完成了信号检测电路、电平平移电路、单片机接口电路以及数据通信等电路的设计。
In the view of the control system, the paper discuss hardware architecture, software architecture, interface architecture, data communication, and servo control system.
文章从系统角度讨论了卷簧机数控系统的硬、软件构成，界面结构，数据通讯及伺服控制。
The Serial peripheral Interface is a sort of technology with high speed and efficiency, which makes the SPI device convenient in data communication.
SPI接口技术是一种高速，高效的串行接口技术，因而SPI设备在数据通信中应用十分方便。
The SDI-12 communication standard, a kind of serial data communication interface protocol, is widely used in environment monitoring in Euro-American countries.
本文推荐的SDI— 12通讯标准是近五年来欧美国家在环境监测中广泛使用的一种串行数据通讯接口协议。
Parallel interface is usually adopted in the applications of data acquisition that need close -range data transfer and fast communication, such as CCD and video data acquisition.
在要求传输距离近，通信速度快的数据采集应用中，如CCD、视频数据采集，往往采用并行接口方式。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
This paper introduces to use USB2.0 as the communication interface to collect infrared image data so as to realize the real-time transmission of infrared image.
本文提出了应用usb2.0作为红外图像采集的通讯接口，实现快速、实时的红外图像采集传输。
And it USES asynchronous serial communication technology based on RS-485 electric interface as communication means. The process of sending data frames are analyzed and communication protocol was made.
并且使用了广泛应用的RS- 485电气接口的串行通讯技术作为通讯方式，文中分析了发送数据桢的过程，并制定了通讯协议。
The POF's diameter is measured by using laser diameter gauge and the data of the diameter is sent through its RS232 serial communication interface.
以激光测径仪为测量手段，通过其RS232串行通信接口发送数据。
Based on the USB bus interface chip CH375, we design the locomotive signals data recording system, and detail the design of communication interface of CH375 and TMS320F2812.
基于USB总线接口芯片CH375，设计了机车信号记录仪数据记录系统，并详细阐述了CH375与TMS320F 2812之间的接口设计。
The data communicating between the data sampling unit and the computer adopts RS485 fieldbus. At the same time, the communication protocols and RS485 communication interface are designed.
前端数据采集装置和后台上位机之间数据通信采用RS485总线，设计了RS485通信接口电路和通信协议。
Or, more formally, to use the -232c serial standard terms, between the Data Terminal Equipment (DTE) interface and the Data Communication Equipment (DCE) interface.
或者更正式，使用- 232c系列的标准条款，数据终端设备(dte)之间的接口和数据通信设备(DCE)接口。
Wireless communication is used to transfer data between measurement system and PC. The PC control interface is designed.
设计了PC机控制界面，使用无线通信实现了测量系统与PC机的数据传输。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
We illustrate how to use EPON Network Element Management System Communication Interface to call for business and how to use the callback function to transmit alarm data.
文章举例说明了EPON网管中如何使用通信接口进行业务调用以及如何运用通信接口中的回调功能进行告警数据的传输。
Second, according to the whole scheme, the paper explains particularly the hardware design of data storage and display system and the communication interface design of data acquisition system.
其次以总体方案为背景，就系统中的数据存储及显示系统的硬件设计，和数据采集系统的通信接口硬件设计进行了详细的介绍。
This type of bus interface can be accessed by memory mode and be applied to the exchange of data between two hosts, which can overcome the lack of communication interface in some types of CPU.
本接口采用存储器访问模式，克服了某些CPU外围通信接口少的缺点，易于实现双CPU间的总线对接，且无需考虑复杂的总线仲裁机制。
Modular structure is used in the system, real-time planning and control for 7-dof is implemented with real-time operating system software and high speed data communication interface.
该系统采用模块化结构，配有实时操作系统软件及高速数据通信接口，可以完成多自由度的实时规划与控制。
To be more specific, the detailed data transfer agreement and the interface software plan for CAN bus communication are discussed on the basis of aluminum reduction requirements.
根据铝电解生产的特点详细讨论了传输的数据约定协议，给出了CAN总线通信接口软件设计方案。
Because data frames arrive in term of time slot for the communication interface integrated chips, the pipeline data path is an effective optimization method.
对于通信接口芯片设计，数据帧依照时间顺序依次到达，因此，采用流水线数据通道对帧数据进行处理是有效的优化方法。
It USES USB2.0 as the communication interface to collect infrared image data so as to realize the real-time transmission of infrared image.
提出了应用usb2.0作为红外图像采集的通讯接口，实现快速、实时的红外视频图像传输。
The system can insure the conversion between the Serial Communication and network interface, and finite samples multi-channel parallel collection, and real-time display and data conservation function.
该系统实现串口通信与网络接口的转化，有限点多通道并行采集，实时显示及数据保存功能。
The data communication between SCM and microcomputer was achieved by the USB interface, and the barcode data uploading was performed.
通过USB接口实现单片机与微机的数据通信，完成条形码数据的上传。
The data communication between SCM and microcomputer was achieved by the USB interface, and the barcode data uploading was performed.
通过USB接口实现单片机与微机的数据通信，完成条形码数据的上传。
应用推荐