The analog method is a slightly more complicated method of producing a forecast.
相似物方法是有点儿复杂的制作天气预报的方法。
Based on the analysis of differences between two kinds of CMOS gates, parameters setup of AC CMOS gates are investigated by means of the analog method.
在分析二类CMOS电路差异的基础上，本文采用类比的方法对交流CMOS电路的设定进行了研究。
At the same time, we obtained results from the analog method by means of resistance network. The results were compared with that of the finite element method, and they are in good agreement.
本文同时给出了电阻网络模拟方法所得到的结果，并与有限单元计算结果进行了比较，两者是一致的。
Constructing a wetlands or savanna by reassembling portions of a natural one is only one method of biome building — which the ecologists call the "analog" way.
获取自然环境中的某些部分，再将它们重新组装成湿地或者草原，只是建立生态区的办法之一，生态学家们把这种办法叫做“比对”法。
The design method, debug method and the method of enhancing degree of linearity are researched in the constituting of analog signal isolating circuit with linear optical couplers.
研究了应用线性光耦合器组成模拟信号隔离电路的设计方法、调试方法以及提高线性度的方法。
Simulation confessed: the method has high location precision and fast decomposition rapid, which can be applied to diagnose large-scale analog circuit fault.
仿真试验表明该方法故障定位精确度高、撕裂迅速，有利于大规模模拟电路故障诊断过程自动化的实现。
An analog maximum power point tracking (MPPT) controller integrated circuit (IC) based on open-circuit voltage method was proposed to enhance the photovoltaic conversion efficiency of solar cell.
为提高光伏电池的光电转换效率，设计一种基于开路电压法的光伏电池最大功率点跟踪(MPPT)控制芯片。
In this paper, a method of fuzzy fault diagnosis based on the model for the analog circuits is presented.
文中提出了一种基于模型的模拟电路故障诊断方法。
The relaxation method in analog computation for rectification process of associate systems is introduced.
本文介绍缔合物系精馏过程模拟计算的松弛法。
The dissertation proposes a signal-flow driven placement method of analog integrated circuits.
本文提出了一种信号流驱动的模拟集成电路布局方法。
The Conception of analog bus of ATS are introduced, the controlling model and program design method of analog bus are discussed.
介绍了ATS(自动检测系统)模拟总线的概念，并叙述了模拟总线的控制模型及控制程序的设计方法。
At last, the analog design of construction method is given.
最后进行了施工方案的模拟设计。
In this article the initialization method of the software, the processing flow of analog and digitized RGB signal, the processing method of the encoded infra signal are all introduced, too.
文中详细介绍了软件的初始化方法、模拟和数字rgb信号的处理流程、电源管理方法、红外遥控编码信号接收处理方法等。
From above, the analog modeling method in the system has the extremely widespread application value in the appraised the aspects.
由此可见，模拟模型方法在系统评估方面有着非常广泛的应用价值。
In this paper a method for the fault analysis of nonlinear analog circuits is introduced and the solvability of the fault equation is also discussed.
本文介绍了非线性模拟电路故障分析的方法，并对故障方程的可解性问题进行了讨论。
To achieve the precise amount of non-linear simulation and rapid detection, linear analog multi-point calibration detection method is proposed.
为实现非线性模拟量的精确、快速检测，提出了非线性模拟量的多点定标检测方法。
The main structure of the device, the selection of the microprocessor, the design of analog inputs, and the A/D sampling method are argued in detail in this dissertation.
论文中对装置的主体电路结构、主控芯片的选择、模拟量输入通道设计和A/D采样方法进行了详细的方案比较和论证。
Based on the electric analog method for blank unfold which has already exist, a new reverse educing method about bulge-blank unfold based on equipotential field is introduced.
基于已有的电模拟坯料展开方法，提出了一种新的关于胀形件的类等势场反推坯料展开方法。
Based on least squares wavelet support vector machines (LS-WSVM) within the Bayesian evidence framework, a systematic method for fault diagnosis of analog circuits was proposed.
基于贝叶斯证据框架下的最小二乘小波支持向量机，设计了一种新型模拟电路故障诊断方法。
Our system is computer system, so we design the digital controller using analog design method.
结合本系统是计算机控制的特点，利用模拟设计方法设计了本控制系统的数字控制器。
In order to make strength analysis, analog conversion method was used to obtain the shearing force, which could not be determined on the shearing machine directly.
为了进行强度分析，文中在剪切力的获取上采用了模拟转换方法，从而解决了在剪切机上不能直接得到剪切力的困难。
This paper introduces an analysis method of analog circuits based on the pole-zero sensitivity, and gives formulae of the sensitivity.
介绍了基于模拟电路极零点灵敏度的分析方法，给出了极零点灵敏度的计算公式。
In this paper, an improved L1-norm method for diagnosing the faults in analog circuit with tolerance is proposed.
本文提出一种线性模拟容差电路故障诊断方法——改进的L_1范数方法。
So expatiated the principle and method of analog practice education.
为此，阐述了模拟实践教学的原则和方法。
Against the limitation of tearing nodes that must be accessible in analog circuit diagnosis based on tearing technology, the method of virtual accessible testing nodes was presented.
针对网络撕裂方法诊断模拟电路故障过程中撕裂节点必须是可及节点的限制，提出了虚拟可及测试节点的方法。
It introduces a automatic alignment method between analog pointer meter's pointer and scale to replace the artificial alignment method with image processing technology.
介绍了一种用图像处理技术实现模拟指针表指针和刻度自动对准代替人工对准的方法。
In this paper, using the equivalent circuit's conversion, the teaching method of analog electric technology is discussed through the examples.
通过实例，对模拟电子技术教学中应用等效电路变换的教学方法进行了探讨。
In this paper, an efficient method of the analog circuit fault diagnosis is presented.
本文提出了一种模拟电路故障诊断的有效方法。
In this paper, an efficient method of the analog circuit fault diagnosis is presented.
本文提出了一种模拟电路故障诊断的有效方法。
应用推荐