The common hypotheses of the shell structure aren't alterative in the new finite element method and it finishes the solution through the integral of the different laminas.
新单元的计算方法不改变壳体结构的一般假设条件，利用厚度方向分段积分来完成问题的求解，并对层合截锥壳进行计算。
The paper presents an introduction to a calculation method that is used to calculate the pavement structure of small interlocking blocks with the finite element method.
文章介绍了一种使用有限单元法计算小型联锁块铺装结构的计算模式，并对该方法进行了试验论证。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
Due to high computing precision and processing arbitrary structure shape, finite element method (FEM) can become proper method to solution this problem.
具有较高计算精度并能够处理任意结构形状的有限元素法可作为求解该问题的合适的方法。
The mixed method of boundary element and fractal finite element is adopted to solve the cracked structure-acoustic coupling problems.
应用分配形有限元和边界元相结合的方法于含裂纹的结构声相互作用问题。
Combining with an engineering instance, basing on the current specifications and a certain construction, the transfer girder structure is analyzed by the method of finite element.
根据现有规范规定，结合工程实例，本文提出了钢骨转换梁与上部剪力墙共同作用的结构的截面极限承载力的计算方法；
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
On the base of above research, stochastic finite element method was adopted to attempt to analyse reliability of the piezoelectric truss structure.
在此基础上引入随机有限元法，对该桁架系统进行结构可靠性初探研究。
As widely application of FEA in product design and performance, the finite element method is used to analyze the structure of nebulizers based on the piezoelectric coupling theory.
基于有限元方法在产品设计和性能分析中的广泛应用，根据压电耦合有限元分析理论，对雾化器结构进行了深入的分析。
This paper is devoted to solving strength and stability problems of a built structure by using the finite element method and the increment method for the geometrical nonlinear structural problem.
本文用有限元素法和对于几何非线性结构问题的增量法求解组合结构强度与稳定性问题。
Theoretical analysis is done on the static and dynamic characteristics of the structure, differential equations are presented, and it is also verified by the finite element method.
同时对机构进行了静态和动态特性理论分析，提出了机构静态和动态计算解析式，并用有限元方法对机构动态和静态特性进行了验证。
The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
To design the magnet structure, finite element method is used to analyze the permanent magnetic field.
在磁体结构设计中，本文采用有限元软件分别对单、双环形永磁结构进行了分析计算。
On the basis of non linear finite element method, fundamental equation and solution of pneumatic membrane structure finite element analysis are put forward.
以非线性有限元法为基础，提出充气薄膜结构有限元分析的基本方程及解法。
The finite element method is applicable to complex structure, so it has great application value in engineering.
有限元法是一种适合于各种复杂结构的分析方法，值得在工程上推广。
Accurate geometry! Non linear finite element increment equilibrium equation is set up by two orders theory. Typical structure stability is analyzed with this accurate finite element method.
由二阶理论建立了梁杆结构分析的精确几何非线性有限元增量平衡方程，并利用精确有限元方法对一些典型结构进行了稳定性分析。
Study in the thesis indicates integrated finite element method is significant for the calculation of construction structure in the reality.
论文研究工作表明，应用组合有限元方法计算大型施工结构问题具有现实意义。
Dynamic analysis of structure through combining the finite element method with the experimental mode is a practical reliable and effective modern method.
试验模态分析与有限元计算相结合的研究方法是一种实用、可靠的结构动态分析的现代方法。
Analyze truss antenna framework structure with finite element method and establish sub-model to compute the stress distribution of the speecial part.
应用有限元方法对桁架式天线骨架结构进行分析，在关注区域建立了模型计算准确的应力分布。
Based on interval analysis and displacement finite element method, the static displacement response analysis of structure comes down to solve the interval finite element control equation.
现有的理论和方法采用区间分析和位移法有限元理论对其进行分析，最终归为位移法区间有限元控制方程的求解。
Dynamic response of viscoelasticity structure is analyzed based on nearly incompressible finite element method.
采用近似不可压缩有限元方法，分析了粘弹性结构的动力响应。
Dynamic response of viscoelasticity structure is analyzed based on nearly incompressible finite element method.
采用近似不可压缩有限元方法，分析了粘弹性结构的动力响应。
应用推荐