The necessary to measure the automobile directive wheel sliding and the theory of measuring are described. The hardware and software of measuring system based on the theory are designed.
介绍了汽车转向轮侧滑量测量的必要性和基本测量原理，根据其基本原理设计了测量系统的硬件和软件；
The complete scheme of measuring circuits and the system of hardware and software of the microcomputers are particularly introduced.
详细地介绍了测量电路、微机硬件和软件系统的实现方案。
In this paper, the design process of the CCD wood board auto-measuring system was stated in detail in aspect of the hardware and software.
本文从硬件和软件两方面详细地阐述了CCD木材几何尺寸自动检测系统的设计过程。
The article introduces the design target, principle project and software design of empty jar online measuring system.
介绍了一种用于啤酒瓶空瓶在线检测系统的设计目标、原理方案及软件设计。
A outstanding problem in control software of TV follows the measuring system at present is it is hard to reuse and extend the code.
现有的电视跟踪测量系统的主控软件的一个很突出的问题是代码的重用性和扩充性差。
The hardware connection, software design and the communication examples of measuring data in the system are also presented in detail.
详述了其硬件连接及软件设计，并给出了系统中测量数据的通信实例。
A method for measuring the dynamic frequency characteristics of a system with 8031 single chip microcomputer was presented, the circuit diagram was given and the software designing was introduced.
提出了用8031单片机及相应接口电路来完成系统动态频率特性测试的方法，给出了硬件的电路原理图，介绍了软件设计。
This paper presents an automated measuring system of moisture content for grain storage based on CAN, introduces the principle, hardware structure and software flow of the system.
本文提出了一种基于CAN总线的储粮水分自动测试系统，介绍了系统的工作原理、硬件结构和软件流程。
The expansion of SCORPIO-2104 software system and the establishment of a new realtime measuring system are described. A practical example in experimental reactor physics is also given.
本文主要叙述SCORPIO-2104系统的软件扩展和建立新的实时核测系统的方法，同时还介绍了在堆物理实验中的一个应用实例。
The improved measuring points, used on-line instruments, implementation scheme of hardware, software platform and execution manner of control system are described.
说明了改造的测点、使用的在线仪表、硬件实现方案以及控制系统的软件平台和实现方法。
This paper briefly introduces the system and principle of capturing fogdrop image. And then mainly introduces the software of fogdrop image processing and fogdrop size measuring.
简要介绍了雾滴图像采集硬件系统的组成和原理，主要介绍了雾滴图像处理和雾滴尺寸测量与分析软件部分的实现方法。
This paper introduces the to tolerance design for the measuring and control software of the intelligent calorific value measuring system.
本文介绍智能热值测量系统中测控软件的容错设计，从而提高了系统的容错性。
The principle of the solid material level measuring system with SRM is briefly introduced and the emphasis is placed on its hardware and software.
简单介绍应用开关型磁阻电机的固态物料料位探测系统的原理，重点介绍系统的硬件和软件。
The optimum algorithm of least-square method, the measuring principle, the system structure, the disposition of software, the test result and the analysis of error are also given.
本文阐述最小二乘法的优化算法、仪器的测量原理、系统组成和软件配置，并给出试验结果及误差分析。
The ECT system used to imaging the distribution of sintering ore and cokes in lump zone of a blast furnace is studied including the sensor design, measuring circuit design and system software design.
介绍了用于实现高炉块状区物料分布可视化监测的E CT系统，包括系统的硬件检测电路构成、传感器设计及软件设计。
The measuring principle and the software of a computer-aided three-dimensional geometry measuring system used on the assembly line of an EVECO auto-car are presented.
介绍了最近研制成功的依维柯汽车底盘横梁在线三维几何量微电脑测量系统的测量原理和测量软件。
The fundamental principle, hardware components and the method of software design of realtime system of data acquisition for computerised pipe measuring machine system were discussed.
论述了管形测量机的基本原理、硬件结构、实时数据采集系统的软件设计方法。
The design of measuring system of dynamic contact resistance is achieved, including: hardware design and software design.
完成了导电环动态接触电阻测量系统的总体设计，包括硬件电路设计和软件设计。
The basic principle of measurement is presented. The optical system, hardware controlling system and measuring software are designed.
介绍了测量原理，设计完成了相应的光学测量系统、硬件控制系统和控制测量所需的软件。
The initial configuration sub module configures the hardware of the imaging quality measuring system via software and transfers the parameters from the main control module to software configuration.
初始化配置子模块负责正确配置像质测量系统的硬件，并根据主控制模块传入的参数进行对应的软件设置。
The calculation method of infrared photoelectric target for firing dispersion extent is introduced. A high-efficiency software of target measuring system is designed.
介绍了红外光电立靶射击密集度的计算方法，设计了一种高效率的靶场测试软件。
In this paper, the hardware and software of the PC-1500 computer measurement system as well as its application for measuring Angle drive ratio of steering wheel are introduced.
本文介绍了PC—1500计算机测试系统的硬件、软件和在转向器角传动比测试中的应用。
The modification design for the surface roughness measuring instrument by microcomputer is introduced. The principle of the system and design of the hardware and software are emphatically discussed.
介绍了利用微机对表面粗糙度测量仪的改进设计，重点说明了系统的原理及软、硬件设计。
A computer software system for measuring fermenting degrees is developed, which can improve the precision of area measuring on fermenting degrees.
开发了一个用于测量发酵程度的计算机图像测量软件系统。
The functions of the software system include controlling the hardware, searching satellite and measuring the main parameters of the antenna.
软件系统包括：完成对硬件的软件控制，实现寻星定位子系统的寻星算法以及对天线主要测量参数的软件实现。
The hardware and software designing of automatic measuring system in wood drying kiln are discussed in the paper.
本文论述了木材干燥工业现场参数自动测试系统的硬件、软件设计。
Electrical and software design of the measuring arm system are carried out, key studies are the realization of servo motor position control and a number of sensors data acquisition.
对测试机械臂系统进行了电气和软件设计，重点研究了伺服电机定位控制和数据采集的实现。
The hardware principle and software flowchart of the remote measuring and control system are offered.
给出了该远程测控系统的硬件原理图及软件主程序流程图。
The application of the DS1820 digital temperature sensor in the measuring and controlling system and software design is discussed detailedly in the paper.
详细讨论DS1820温度传感器和单片机接口电路，软件设计以及在测控系统中的应用。
The principle of hardware and software on turning error online measuring system controlled by 8098 single-chip micro-computer for principal axis of lathe was discussed.
阐述了8098单片机对车床主轴回转误差在线检测的原理、硬件设计及软件原理。
应用推荐