It expounds the software and hardware designing schemes and main points as well as explains the application of the CAN bus controller-SJA1000.
阐述该系统软、硬件的设计方案和设计重点；讲解CAN总线控制器SJA1000的应用。
The paper introduces the system structure, the working principles and software and hardware designing of control system based on PLC and touch screen.
主要介绍了由PLC与触摸屏组成的控制系统构成、工作原理及软硬件设计。 该装置具备平面内直线、圆弧线焊缝焊接、立体环面焊缝的焊接功能。
This paper deals with the software and hardware designing and its characteristics of the controlling system TPCS-1 for tungsten bars furnace by microcomputer.
本文介绍了TPCS - 1型钨棒炉程序控温系统的软、硬件设计及其特点。
The device can be used as a demonstration of computer control system as well as an emulation research for both the software and hardware designing and debugging of the control algorithm.
该系统可作为计算机控制系统教学的演示装置，亦可进行系统硬、软件设计、调试及控制算法的仿真研究。
For matching the demand of local carmakers, it is discussed in this paper that the software and hardware designing and the principle of the new type brake hub fatigue testing device of car.
针对国内汽车生产厂家的需求，本文就新型汽车刹车制动毂疲劳试验机的软硬件设计及工作原理进行论述。
Finally, the principle of hardware selection and designing are discussed. Two software and hardware designing schemes of online inspection system based on mathematical morphology are proposed.
最后据现场要求探讨了系统的硬件选型和设计问题，给出一种基于数学形态学处理的两类系统硬件设计方案。
This article has put forward the system design plan of virtual noise tested, designing the systematic hardware system and software system of the virtual noise.
该文提出了虚拟噪声测试系统的设计方案，设计了虚拟噪声测试系统的硬件系统与软件系统。
This article introduces the designing ideas of hardware and software of the pressure displacement detecting and displaying system.
介绍压下位移检测及显示系统的硬件设计与系统软件设计思想。
Digital signal processor (DSP) was adopted to design portable rotating air blower fault diagnosis instrument, and the system hardware structure and the software designing ideas were expounded.
以数字信号处理器DSP研制便携式旋转风机故障诊断分析仪，并详细阐述了系统的硬件结构以及软件设计思想。
The main work includes hardware designing and software compiling.
研究工作主要围绕硬件设计和软件编写来进行。
The main work includes hardware designing and software compiling , optimization designing of system is mainly considered in hardware and software designing .
研究工作主要围绕硬件设计和软件编写来进行，系统设计着重考虑了系统的硬件结构、选型以及软件结构的优化。
The digital of roll is studied on the base of above study, the designing of DSP hardware and software is completed by TMS320LF2407.
基于以上分析，进行了滚转控制通道数字化研究，完成了基于TMS320 LF 2407芯片的DSP硬件和软件设计。
The way of hardware combining and software designing are introduced as well.
文中介绍了硬件的组成和软件的设计方法。
After introducing the principle of heat meter, the paper presents a new type of intelligent heat meter, the designing methods of whose software and hardware are given in detail.
对热量表的原理进行了分析。在此基础上讨论了智能热量表的设计思想及其软、硬件设计方法。
In addition, the hardware designing and the software programming, also the computer realization method, is studied, so the whole complex design process of the computer control system is studied.
另外研究了控制系统的硬件设计和软件编程及采用计算机控制的具体实现方法，较全面说明了复杂计算机控制系统的设计过程。
The designing of hardware, programming and debugging of software and improvement of the electronic control system were accomplished.
完成了电控单元的硬件设计，软件编制调试以及系统改进和完善工作。
The thesis expatiates the hardware composing and software program designing.
阐述了硬件组成和软件程序设计。
The system is specialized in designing of hardware and software in order to achieve real-time data processing.
系统在硬件结构和软件流程上进行了特殊的设计，以保证实时数据处理功能。
By combining software design and hardware circuit, the modularization of designing data acquisition circuits is fulfilled, and the accuracy and reliability of the system are enhanced.
通过软件设计和硬件电路的结合，实现了数据采集电路的模块化设计，提高了系统的精度和可靠性。
This thesis discusses its realization and optimization form the aspects of construction, designing standard, hardware and software structure, etc.
本文主要从建设目标、设计原则、硬件结构、软件结构等方面进行进行优化和实现。
The major circuits and flow-charts of hardware and software design for micro-computer controlled heat insulation tester are presented and the designing principles and features described.
本文着重介绍微型计算机控制的保暖性测试仪硬件软件设计的主要电路和程序流程图，并阐述设计的原理与恃点。
The designing method of hardware and software of the system is introduced.
文中介绍了系统的硬件、软件设计方法。
The hardware and software designing process of EIB universal interface is described.
文章给出了EIB通用接口硬件、软件设计过程。
Mainly there are three parts in the paper, the designing of hardware, the designing of the software and the designing of the mechanical parts.
本文着重说明了系统的硬件设计，软件设计以及主要的机械构件设计三部分。
This paper introduces the principle of the system and the designing of the hardware and software.
本文介绍了该系统的工作原理，单片机在该系统中的作用及硬件设计、软件设计要点。
This paper presents a design precept of static inverter using three phase PWM generator SA8282 and shows the programmes for designing hardware and software of the circuit.
简要介绍采用三相pwm产生器sA 8282研制的三相静止逆变器及其电路硬件、软件设计方案。
The major work in the paper includes choice of chip and other components, designing the hardware circuit and wiring, software and hardware programming, and so on.
论文详细介绍了实现过程中的具体工作，主要包括芯片的选型、硬件电路的原理设计和布线以及软硬件编程等。
The high precision material measured control system is proposed in text realized by PC, stating the operation principle, composition structure and key technology of designing hardware and software.
本文提出了一种以PC工控机实现的高精度微机称重配料系统，阐述了该系统的工作原理、组成结构以及系统硬、软件设计关键技术。
The high precision material measured control system is proposed in text realized by PC, stating the operation principle, composition structure and key technology of designing hardware and software.
本文提出了一种以PC工控机实现的高精度微机称重配料系统，阐述了该系统的工作原理、组成结构以及系统硬、软件设计关键技术。
应用推荐