Simulation and computation of bobbles volume scattering function in water.
水中气泡上体散射函数的模拟与计算。
Not only many high quality meshs are constructed but also those meshs are applied in actual numerical simulation and computation.
得到了多种类型的高质量的网格，并将它们应用于实际的数值模拟与计算中。
This paper focuses on mini basin characteristics of runoff concentration based on the simulation and computation of 13 mini basins.
该文通过13个特小流域的汇流模拟计算，研究了特小流域的汇流特征。
Simulation and computation results show that the rotor winding faults will cause electromagnetic torque and rotating speed to fluctuate;
转矩与转速波动的频率相等，波动的幅值随转子绕组故障严重程度增加而增加；
The method is concise and convenient for program, simulation and computation. It can be applied in many study fields, such as rocket launch dynamics, external ballistics, firing table.
该方法简洁方便，易于编制程序及模拟仿真，便于工程人员掌握，可用于火箭发射动力学、外弹道学及射表编制等方面研究，具有一定应用价值。
The models and computation procedures for determining fracture propagation path were provided, and the software for simulation of fracture propagation was developed.
提出了定向射孔水力压裂裂缝的延伸轨迹计算模型和步骤，编制了裂缝延伸的模拟软件。
The parallel computation method was used for numerical simulation of flow field with moving boundary, and unstructured moving grids were generated by spring analogy method.
将并行计算方法应用于含运动边界流场的数值模拟，采用弹簧方法生成非结构运动网格。
By using computer simulation and numerical computation of OTF, the image property is analyzed for the case of different annular lenses and detector in confocal scanning system.
用计算机模拟和光学传递函数数值计算，分析了采用不同环形透镜及探测器对系统成像特性的影响。
There are multi-kind simulation methods of soft body modeling based on physics, but huge computation and complex algorithm are the limitations of these methods.
目前已经有多种基于物理的软体模型模拟算法，但计算量大与算法复杂是这些方法的主要缺陷。
Simulation result shows that improved algorithm has higher localization accuracy and smaller computation.
实验结果表明，改进算法的运算量较小，定位精度较高。
The contrastive analysis of modal test and simulation computation show that the finite element model of body-in-white has well represented the vibration characteristics of the original structure.
模态试验和仿真计算的对比分析结果表明，所建立的白车身有限元模型较好地反映了原结构的振动特性。
The mechanical property and electricity property of the vacuum micro electronic pressure sensor is studied and relevant computation and simulation are carried out.
研究了真空微电子压力传感器的力学和电学特性、传感器结构及相应的计算与模拟。
At last, the methods of numerical computation and numerical simulation were used to make an attempt on the shaped charges formation and penetration.
最后用数值计算和数值模拟的方法对射流的形成及侵彻过程做了初步的尝试。
In this paper, we first introduced computer molecular simulation status and development trend of materials computation with computer molecular simulation.
本论文首先介绍了计算机分子模拟，以及计算机分子模拟下的材料计算的现状及发展趋势。
The simulation results show that the formula is simple and the computation cost is small.
模拟结果表明，该公式具有表达简单、计算量小的优点。
The numerical simulation method is suitable for complex formations, whereas the analytic method or semi-analytic method is superior in less computation and storage costs.
数值模拟方法可用于计算比较复杂的地层。借助解析或半解析方法，可使计算量和存储量降低。
The CFX software application in simulation, computation and results analysis for design and operation of cracking heater.
应用CFX软件对裂解炉中的关键技术的模拟、分析及计算情况的综述。
With the effective parallel computation algorithm, the simulation of complex inviscid flow is finally achieved more efficiently and quickly.
进一步配合流场有效的并行计算算法，最终可实现高效、快捷地模拟复杂流场。
Discuss the three aspets of the logical-level simulation theory of digital circuits: the construction of delay model and multi-state model, simulation algorithms, and methods of component computation.
讨论了数字电路的逻辑级模拟中元件传输延迟模型、元件状态值模型的建立，逻辑模拟的算法以及元件计算的方法。
Subset simulation is a general method for structural dynamic reliability computation, and it is especially efficient for small failure probability computation of nonlinear structure.
子集模拟法在计算结构动力可靠度时适用范围较广，针对非线性结构小失效概率的计算效率较高。
At the same time, unifies the computation technology, produced in the cementation the carbon potential of computation, and by using the computer to the carbon potential simulation.
同时结合计算技术，给出了渗碳中碳势的计算以及利用计算机对碳势浓度的仿真。
According to the blackboard architecture in the parallel computation techniques, a framework for parallel and distributed traffic flow simulation is presented in this paper.
参考分布式计算技术中“黑板”体系结构，提出了交通流分布式并行仿真框架，并基于。
According to the secondary regression in quadrature combined method, the design and computation of finite element numeric simulation were done.
根据二次回归正交组合方法与油气藏射孔完井有限元模型进行了数值模拟试验的设计与计算。
This paper introduces the design that finite impulse response filter is simulated by MATLAB to simplify the complicated computation in simulation and to improve the performance of filter.
本文着重介绍采用MATLAB软件对有限冲激响应滤波器进行仿真设计，从而简化了设计中繁杂的计算，并提高了滤波器的滤波性能。
Traditionally this is done by importing pressure data into simulation software from experimental results or special computation software and this is troublesome in practice.
传统的方法是将实验结果或内弹道专用软件算得的膛压数据导入仿真软件中，这在实际操作中是很费事的。
The control unit of dynamic balancing system is calibrated through theoretical computation and output simulation, solving calibrating difficulty for lack of equipments.
其次，通过理论计算，模拟传感器电量输出，对动平衡系统中测控单元进行了标定，解决了缺少设备条件下对仪器进行标定的难题。
The computation results show that the simulation software will be good aid in the process of FIS design and the matching of the main structural parameters.
计算结果表明该优仁设计仿真软件在燃油供给系统的设计及主要结构参数匹配过程中具有良好的辅助作用。
The computation results show that the simulation software will be good aid in the process of FIS design and the matching of the main structural parameters.
计算结果表明该优仁设计仿真软件在燃油供给系统的设计及主要结构参数匹配过程中具有良好的辅助作用。
应用推荐