DVD system. Good knowledge in servo system, video signal quality, video decoding and compression.
DVD系统。在伺服系统，视频信号质量，录影解码和压缩领域有良好的知识储备。
This paper proposes a servo control system for permanent magnet synchronous machine (PMSM) based on Application Specific Intelligent Power Module (ASIPM) and Digital Signal Processor (DSP).
文章提出了采用一种新型专用智能功率模块ASIPM，结合数字信号处理器DSP开发的永磁同步电动机伺服控制系统；
The experiment results show that phase phenomena are probably caused while the servo amplifier gain and the amplitude of input signal increase to some extent.
实验结果表明，当伺服放大器增益和输入信号的幅值较大时都有可能促成系统的相位突变。
The motion control of stepping motor in the servo system is investigated and a motion control module based on digital signal processor is designed.
介绍有关步进电机的伺服运动控制，设计了基于数字信号处理器的运动控制系统。
The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.
再用电机伺服驱动系统控制天线转动，调整其重新指向卫星接收信号。
The problems are studied about the digital servo using Digital Signal Processor (DSP)for rewritable optical disk drives, and the system scheme is presented.
该文研究了可重写光盘机DSP数字伺服控制的问题，给出了数字控制系统的硬件构成。
Anolog speed signal VEL from SDC is also taken as speed feedback signal to form speed loop in gun servo system.
SDC输出的模拟速度信号VEL还可以作为速度反馈信号以构成火炮伺服系统中的速度回路。
Methods When debugging servo system, the signal sending parts of servo system's detector made of DSC controlled the movement of servo system.
方法由DSC组成伺服系统检测中的信号发送装置，在调试伺服系统时，控制伺服系统的运动。
The performance of servo control system determines the reliability and stability of VTR (video Tape Recorder), and enables ultimately VTRs to record and replay video signal accurately.
伺服控制系统的优劣决定着录像机的可靠性及稳定性，是录像机得以正确记录和重放视频信号的根本保证。
The simulation principles and the mathematical model is described, and then, the key models of simulations such as signal characteristics, servo systems and signal process system are followed.
重点描述了仿真原理及仿真模型组成，介绍了雷达信号特性仿真、雷达伺服系统仿真、雷达信号处理系统仿真等关键环节的数学仿真模型。
Based on the primary functions of the DVD servo signal processing, it is given that the system structure of DVD servo chip, which is compatible CD and DVD and also has disc writing function.
在总结DVD伺服信号处理部分的主要功能的基础上，提出了可兼容dvd、CD并带有刻录功能的DVD伺服芯片的系统架构。
The equalizer derives a servo signal from a reflection of the beam.
均衡器用于从光束的反射中获得伺服信号；
Simulation results show that the servo system has high stability and can trace step, sine and ramp force signal with high precision. It is significant to developing the pneumatic servo system.
仿真结果表明，系统稳定性高，能够较好地跟踪阶跃、正弦和斜坡等典型力信号，对常规气压伺服技术应用领域的拓宽具有重要的理论和实际意义。
The servo system for full-digital BLDC motor consists of DSP, memory subsystem based on TMS320F240 and the module for feedback signal acquisition.
基于DSP的全数字化无刷直流电机伺服系统，由包括DSP和片外存储器的以TMS320F240组成的小系统，及反馈信号采集模块2部分组成。
A new slide mode controller is designed for AC servo system. The feed forward signal is used as average control, and fuzzy inference is used to regulate the magnitude of on-off control.
针对交流伺服系统的位置控制，设计出一种新型滑模控制器，以前馈信号作为平均控制，采用模糊推理来调节开关控制的幅度。
This paper gives a design method of servo systems input signal, which is based on exact requires of stepping servo systems and combining of traditional form of input signal.
在基于步进化伺服系统输入信号的实际需求，结合传统伺服系统输入形式，采用曲线拟合的方法，提出一种既便于计算机实现，又可灵活调整的输入信号设计方法，并给出相关的证明。
The servo system of azimuth controller is a combine system of mechanics and electrics, the transmission mechanism drives the executive element by control signal to carry out the demanded motion.
方位控制器伺服系统是一种机、电相结合的系统，机械传动装置根据控制信号驱动执行元件完成指令要求的运动。
This paper puts forward a design of servo motor controller based on AT89LP4052, the design fully utilizes the internal integrated PWM unit in the AT89LP4052 to offer the control signal.
本文提出了以新型单片机at 89lp4052为基础的舵机控制器的设计，该设计充分利用了AT 89lp4052内部集成的PW M单元来提供控制信号。
In the testing of a certain antiaircraft artillery servo system, the signals needed to be measured are time-invariant signal and time-varying signal.
在某型高炮随动系统的测试中，待测信号有非时变信号和时变信号两种。
The servo systems compare the feedback signal with input instruction, then convert the difference into compensatory instruction so to control the output component.
伺服系统将检测信号和输入指令进行比较，将差值转化从而控制输出元件。
A weighing sensor (5), the stepper motor driving the digital servo valve and the coder (10) on the digital valve (1) are respectively connected with the PLC (7) by signal circuits.
所述的称重传感器(5)、驱动数字伺服阀的步进电机以及数字阀(1)上的编码器(10)分别通过信号线路与所述的PLC(7)连接。
The head assembly is stepped a first predetermined number os steps in a first transverse direction until the carrier servo signal is not detected.
沿第一横向使磁头组件步进第一预定步数，直至检测不到载体伺服信号。
A basic frame of direct current pulse width mode of servo control system is presented. Algorithm is realized by embedded digital signal processor.
提出了一种直流脉宽调制伺服控制系统的基本框架，其算法通过嵌入式数字信号处理器(DSP)来实现。
The output of this correction signal can be used to drive a simple auto-focus servo.
修正信号的输出可以用于驱动一个简单的自动聚焦伺服器。
This paper studies the design of precept of missile's wing and rudder load simulation system whose core is digital signal processor (DSP) and DTC servo driver.
本文研究了以数字信号处理器(dsp)和直接转矩控制器为核心的弹用负载模拟加载系统方案设计。
Based on technology of digital signal processing, the paper has done thorough and comprehensive research on full digital AC PMSM servo control system.
在数字信号处理技术的基础上，本文对全数字式的交流永磁同步电机伺服驱动器进行了较为深入和全面的研究。
The proposed algorithm is applied to the control of a DC servo system. Simulation results show that the proposed controller can track the desired position signal well whe…
将所提方法用于直流伺服系统的控制，仿真研究结果表明，所设计的控制器可以有效减弱抖振，并使伺服系统具有良好的跟踪能力和很强的鲁棒性。
5ms. -steering control procedure, the servo control signal is 20ms cycle of the PWM signal. margin which lasted 0.5 to 2.5ms.
舵机控制程序，舵机的控制信号为周期是20ms的PWM信号，其中高电平持续时间0.5到2。
5ms. -steering control procedure, the servo control signal is 20ms cycle of the PWM signal. margin which lasted 0.5 to 2.5ms.
舵机控制程序，舵机的控制信号为周期是20ms的PWM信号，其中高电平持续时间0.5到2。
应用推荐