The automatic initial calibration of triaxial accelerometers and triaxial magnetic sensor, based on least squares method, is implemented.
并运用基于最小二乘的方法实现了一种自动初始校准算法。
The method of detection, isolation and identification of sensor faults based on analytical redundancy is studied deeply. And the performance of the method using examples is evaluated.
深入研究了基于解析冗余技术的传感器故障检测、分离与辨识方法，并用实验评价该方法的性能。
Based on that the paper implement the method of point the suction device accurately and analyse the feasibility of sensor.
在此基础上分析设计了对吸口位置精确定位的控制方法，以及传感器选用的可行性。
This paper analyzes the torque disturbance of the wheeled mobile robot due to dynamic uncertainties during motion and presents a sensor based control method for the mobile robot.
本文分析了轮式移动机器人在运行过程中由于动力学不确定性引起的力矩扰动，并提出了一种基于传感器的移动机器人控制方法。
The cause for generating nonuniform characteristics of SSPA image sensor array is investigated based on introduction of its basic operating principle, and the correcting method is given.
介绍SSPA图象传感器阵列的基本工作原理，在此基础上主要探讨其不均匀性特性形成的原因，并且给出了校正方法。
Furthermore, the idea and method of sensor model design were discussed in detail while taking example for the ground-based tracking-while-scanning radar.
并以地基边扫描边跟踪雷达为例，详细探讨了传感器模型的设计思路和方法。
The reason that the residual test method based on Kalman filter is insensitive to sensor soft fault detection is analyzed.
分析了基于卡尔曼滤波器的残差检验法对传感器缓变故障检测的不敏感性原因。
Aiming at this case, this paper USES a method of grey superior analysis based on adaptive weighted data fusion to process the sensor data.
针对这一情况，本文应用了一种基于自适应加权数据融合的灰色优势分析方法对传感器数据进行处理。
This paper proposes a new humidity sensing method, together with the design of humidity sensor and the measuring system based on Fiber Bragg Grating(FBG)strain sensing.
基于光纤布拉格光栅（FBG）的应力传感特性，提出了一种湿度传感方法，给出了湿度传感器的设计和实验测量系统。
The structure and measuring method of a new ice thickness sensor are presented based on the electric conduction characteristic of water and ice.
基于水和冰的这一导电特性，提出了一种新的冰层厚度传感器结构及其检测方法。
An error correction method for three axial fluxgate sensor based on support vector regression (SVR) is proposed.
提出了一种基于支持向量回归机(SVR)的三轴磁通门传感器误差修正方法。
To improve calculation performance of centralized target tracking system which consists of multiple dissimilar sensors, a fusion tracking method based on equivalent sensor was presented.
为了提高多个异类传感器构成的集中式融合跟踪系统的计算性能，提出一种基于等效传感器的融合跟踪方法。
Provides a sensor fault detection and diagnosis method based on statistical mathematics.
提出了一种基于统计数学的传感器故障诊断方法。
With a new combining method of optics and electronics, a device based on a multi-beam optical sensor and a photoelectric sensing circuit was setup.
利用光学和电子学结合的方法，建立了基于多光束光学传感器和光电检测电路的检测薄膜特性装置。
A novel sensor localization method based on optimized path of a mobile beacon.
提出了一种新的基于移动灯塔最优路径的传感器定位方法。
The RBF network function approximation theory and method are introduced, and the method of nonlinear error correction of sensor is presented based on generalized regression neural network(GRNN).
介绍了径向基函数网络的函数逼近原理和方法，提出了一种基于广义回归神经网络（GRNN）的传感器非线性误差校正方法。
The testing method of the fabric infiltrate characteristic based on capacitive sensor technology is introduced.
提出了基于电容式传感器技术的纺织物产品渗水特性检测的方法。
This paper discussed the design method of robotics sensitive skin based on infrared sensor.
阐述了基于红外传感器机器人敏感皮肤的设计方法。
A new rolling resistance (coefficient) test system is developed based on wheel torque sensor, which offers a new method for deeply researching the rolling resistance of the wheels on the rollers.
开发了基于车轮力传感器的底盘测功机上轮胎滚动阻力(系数)的测试系统，为深入研究轮胎在滚筒上的滚动阻力提供了新方法。
This paper presents a new non-contact displacement sensor with diffraction grating metrology system based on an improved Foucault focus detection method.
本文介绍了一种新型的基于改进傅科聚焦探测法且自带衍射光栅计量系统的非接触式位移传感器。
This paper presents a design method of capacitance displacement sensor based on digital synthesis technology.
本文提出了一种基于数字调制和解调技术的电容式位移传感器的设计方法。
In order to reduce child drowning in the unattended ponds or swimming pools, a design method of a pool alarm sensor based on pulse-width anti-narrow is proposed.
为了减少无人看守的水池或游泳池中小孩的溺死事件，提出了一种基于脉宽反窄的水池警报传感器设计方法。
The principle of paper thickness on-line measurement using displacement differential method based on laser displacement sensor and electric eddy current displacement sensor is introduced.
介绍了基于激光位移传感器与电涡流位移传感器的位移差动法在线检测纸坯厚度的原理及测量系统的软硬件设计。
An intelligent heuristic system for conceptual sensor design based on knowledge was proposed through taking sensor effect as knowledge and knowledge engineering as its method.
以传感器效应为知识、知识工程为方法，提出了一种基于知识的传感器概念设计智能启发系统。
Combining the advantages of structured light sensor and stereo vision sensor, a method based on single camera simulating stereo vision sensor has been studied.
结合结构光传感器和立体视觉传感器的优点，研究了基于单摄像机虚拟立体视觉传感器的方法。
Anew method to pulp consistency sensor nonlinear estimation and dynamic calibration based on artificial neural networks is proposed.
本文提出了一种基于人工神经网络的纸浆浓度传感器非线性估计和动态标定新方法。
Anew method to pulp consistency sensor nonlinear estimation and dynamic calibration based on artificial neural networks is proposed.
本文提出了一种基于人工神经网络的纸浆浓度传感器非线性估计和动态标定新方法。
应用推荐