By analysis of explosion accident of high voltage little oil circuit breaker, found out the weak link existed on this breaker, for which proposes some Suggestions for reader reference.
通过分析一起高压少油断路器爆炸事故，从中找出断路器本身存在的薄弱环节，为此提出一些改进建议供读者参考。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
The low-voltage driving circuit is adopted to drive a piezoelectric ceramic phase shifter to shift the phase of the reference beam, so as to make the instrument lighter, smaller and cheaper.
采用低压驱动电路驱动压电陶瓷相移器对参考光束进行相移，从而使仪器质量减轻、体积缩小、成本降低。
The potential energy of a unit charge at any point in an electric circuit measured with respect to a specified reference point in the circuit or to ground; voltage.
电势，电位相对于电路中某一特定参照点或地面的属于电路中任何一点的单位电荷势能；电压。
The first stage circuit receiving the first reference voltage input, while the second input to receive input signals.
第一级电路的第一输入端接收参考电压，而第二输入端接收输入信号。
Circuit Breakers are supplied to protect the 115 VAC Inputs (2 each) as well as the Variable Amplitude Low Voltage Powers used by the Indicator Under Test (UUT) for Power, Reference or Lighting.
断路器被提供用于保护115VAC输入(各有2个)，以及保护被测指示器(UUT)所用于电源，基准或照明的可变振幅低压电源。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。
An overall computer-assisted analysis of the temperature control circuit for the precision reference voltage source LM199 has been made.
基于精密基准电压源lm199的解剖，对其恒温电路作了全面的计算机辅助分析。
The voltage reference generator was the expansion of the bandgap circuit for saving the resources.
基准电压产生电路为带隙电路的扩展，节省了资源并得到了高稳定度的基准电压。
Bias circuit according to the reference voltage to bias the first stage circuit and the current compensation circuit, and set the bias current compensation circuit.
偏压电路依据参考电压来偏压第一级电路与电流补偿电路，并设定电流补偿电路的偏压。
Voltage reference is one of the most important cells in analog circuit.
基准电压源是模拟电路中的一个重要单元。
CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper, with circuit to improve PSRR and start-up circuit.
通过对低压低功耗集成电路设计技术的分析，着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源，其带有提高电源抑制比电路和启动电路。
Receiving the third signal and based on a reference voltage, the switching circuit controls the pulse wave width of the switching signal so as to adjust output current of the power converter.
切换电路接收第三讯号并依据一参考电压，以控制切换讯号的脉波宽度，所以可调整功率转换器的输出电流。
A high-precision CMOS current reference circuit is proposed for using in low-dropout (LDO) voltage regulators with low power.
设计了一种新型的用于低功耗LDO线性稳压器的CMOS高精度参考电流源。
Design a bandgap voltage reference circuit and a voltage-modifying circuit to provide precise voltage and current reference for the referred ADC.
设计了基准电压源和电压微调电路，为adc提供参考电压和电流，而且能进行一定范围内的微调。
A CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper, with circuit to improve PSRR and start-up circuit.
通过对低压低功耗集成电路设计技术的分析，着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源，其带有提高电源抑制比电路和启动电路。
In this paper, a novel high precision CMOS bandgap voltage reference which USES a negative back circuit and a rc filter to enhance the PSRR is proposed.
提出了一种新颖的利用负反馈环路以及RC滤波器提高电源抑制比的高精密CMOS带隙基准电压源。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
A reference sinusoidal circuit based on digital technique and synchronous with the line voltage is investigated. The design principle of the key circuit parameters is given.
本文研究了一种采用数字化技术，实现与电网电压同步的基准正弦电路的原理，给出了电路关键参数的设计原则。
A novel under-voltage lockout circuit is proposed which could generate reference voltage and bias current itself, and could stabilize lockout threshold voltage and hysteresis quality.
提出了一种能够自产生基准电压和偏置电流，并且锁定阈值电压和迟滞量稳定的新型欠压锁定电路。
The temperature correction voltage is subtracted from a reference voltage representing a gain for the circuit to produce a corrected reference voltage for the circuit.
从表示电路增益的参考电压中减去所述温度校正电压，以产生电路的校正参考电压。
Thermal stability and Power Supply Rejection Ratio (PSRR) of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压抑制比是影响整个系统精度和性能的关键性因素。
Bandgap reference voltages are important analog circuit blocks. It can provide a nearly constant reference voltage which is stabilized over process, power supply and temperature variation.
带隙基准电压源之所以是模拟电路中重要的模块，是因为它能够提供近似恒定的参考电压，这个电压不随温度，电源电压，工艺的变化而变化。
A low power CMOS bandgap voltage reference source with a start-up circuit is presented based on the bandgap voltage theory.
运用带隙基准的原理，提出了一种带启动电路的低功耗带隙基准电压源电路。
It USES the traditional principle of bandgap reference together with the self-bias structure and startup circuit to get the stable voltage output and good temperature coefficient.
它利用带隙基准的基本原理，结合自偏置结构以及适当的启动电路，获得了相对稳定的电压值以及较好的温度系数。
This paper proposes a novel high precision CMOS bandgap voltage reference which with a soft-start up circuit.
提出了一种新颖的带有软启动的高精密CMOS带隙基准电压源。
This paper introduces a low supply voltage band -gap reference circuit which used a self-bias cascode current mirror.
因此介绍了一种采用自偏置低压共源共栅电流源的带隙基准电路结构，用两个电阻代替了偏置电路。
The start-up circuit was design for the bandgap voltage reference circuit working normally.
另外设计了启动电路以确保基准电路能正常工作。
Thermal stability and Power Supply Rejection Ratio of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压拟制比是影响整个系统精度和性能的关键性因素。
Thermal stability and Power Supply Rejection Ratio of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压拟制比是影响整个系统精度和性能的关键性因素。
应用推荐