This paper introduces SCSI protocol and the structure of SCSI protocol controller-FAS368M.
介绍了SCSI总线协议，以及SCSI总线协议控制器FAS368M的结构。
The HDLC Protocol Controller can be used as a D-channel interface in a digital line card comprised of multiple DNICs.
HDLC协议控制芯片也可以作为D通道接口，用在包含多个DNIC的数字线路卡上；
In this paper, a test system is designed and researched mainly which is used to test the application specific protocol controller.
本文主要对某专用协议控制器芯片的测试验证系统进行了设计与研究。
Incoming Hypertext Transfer Protocol (HTTP) requests come into the controller.
传入的超文传输协议(HTTP)请求进入控制器。
The device descriptor read by the host controller driver contains information about the device, such as class, subclass, and protocol.
主机控制器设备驱动程序读取的设备描述符包含关于设备的信息，例如class、subclass和protocol。
The protocol of USB Host Controller is analysed and the application of USB technique to intelligent instruments are introduced.
本文研究了US B主控制器协议，并分析了USB技术应用于智能仪表的技术可行性。
Finally the main function codes are extracted to simplify the protocol and to enhance the performance of the controller.
最后提取主要的功能码以达到简化协议、增强控制器性能的目的。
TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求，设计了该车的TT CAN协议。
The speed of data transfer between SCSI devices is upto 160MB/s implemented by the setting of registers in the SCSI controller and the intercourse of expended SCSI protocol messages.
通过对SCSI控制器相关寄存器的设置和SCSI协议扩展消息的交互，实现了主机存储通道的数据传输速度达到160MB/s。
This paper introduced the communication principle of USB2.0' protocol layer and the division, design and realization of the core part of USB2.0' host port controller.
本文简要介绍了USB2.0协议层的通信原理，描述了USB2.0主机端控制器核心部分的划分、设计及实现。
An elevator car controller based on CAN bus is described. The functions, architecture, hardware and software and the communication protocol designing methods of this controller are introduced.
简述了一种基于CAN总线的电梯轿厢控制器，介绍了该控制器的功能、结构及其软硬件和通信协议的设计方法。
Based on DF1 protocol, the design and realization of traffic lights control experiment were studied using Rockwell controller and Rockwell software.
基于DF - 1协议，采用罗克韦尔公司的控制器和罗克韦尔软件，对交通灯控制实验进行了设计及实现。
This paper presents EPP protocol, the EPP circuit design of packet capture controller and the PC's EPP programming.
文中介绍了EPP接口协议、包捕获控制器的EPP接口电路设计和PC机上的EPP实现程序。
The composition of MKS pressure control system, the communication commands and parameters of 651c controller and the method on building serial communication protocol macro are all introduced.
介绍了MKS压力控制系统的组成、651c控制器的通信命令参数、串行通信协议宏的构造方法。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
The HCI protocol is the communication protocol between the host and host controller to provide a uniform method accessing Bluetooth host controller capabilities.
HCI协议是主机和主机控制器之间的通信协议，提供了统一访问蓝牙主机控制器的能力。
The design thoughts of RS 485 communication controller based on SDLC, SDLC protocol and RS 485 protocol are introduced.
提出一种基于SDLC协议的RS 485总线的通信控制器的设计思想。
The system makes use of MCS-51 single chip to design communication controller and oiling controller. Host computer inspects and controls oiling process through serial communication protocol.
该系统应用了MCS - 51系列的单片机，研制出通讯控制器和加油控制机，主机通过串行通信协议来对加油进行控制和监测。
A fire-detection system is introduced for intellective building based on the controller area network(CAN), with the designs of network protocol, hardware and software.
提出了一种基于CAN总线的智能大厦火灾检测系统，给出了该系统的网络协议、硬件以及软件设计方案。
A TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求，设计了该车的TT CAN协议。
This paper discuss the design of the nice interface controller from interconnection strategy selection, interface protocol establishment and memory timing parameters.
本文从接口策略选择、接口协议制定以及存储器迟滞参数入手讨论如何设计性能优良的存储器接口。
This paper based on the mechanism of DDR-SDRAM, gave a way to construct a DDR-SDRAM controller based on WISHBONE bus protocol, and also introduced a forecast method to improve DDR's performance.
SDRAM是当今一种流行的高速存储器。通过和普通sdram存储器对比，阐述了WISHBONE总线协议下ddr存储器控制器的设计方法和注意事项，并提出一种提高DDR工作效率的预测机制。
Based on the protocol, a rapid prototyping controller is developed utilizing virtual instruments to test the characteristics of system components in bench test experiments.
以该协议为基础，采用虚拟仪器技术设计了快速原型控制器，通过台架实验完成了系统中各部件的性能测试；
In the Bluetooth system, the core protocols stack are composed of BaseBand, Link ManagementProtocol, Logical and Link Controller Adaption protocol and Service Discover protocol.
包括基带协议、链路管理协议、逻辑链路控制和适应协议以及设备发现协议，组成了蓝牙系统的核心协议栈。
The forth part is about CAN bus network application layer protocol, which was invented independently, with the support of the SJA1000 bus controller.
第四部分主要介绍在SJA1000总线控制器支持下的，独立自主开发的CAN总线应用层协议。
The controller can communicate with the network and other equipment through the modbus protocol.
通过此协议，控制器之间、控制器经由网络和其它设备之间可以通信。
With the extensive application of USB technology, there is a significant increase in demand for the device controller chip which is compatible with USB protocol.
随着usb技术的广泛应用，市场对兼容usb协议的设备控制器芯片的需求大量增加。
Controller Area Network (CAN) protocol has been widely applied in the field of automation and industry control.
控制器局域网络(CAN)通讯协议在自动化及工业控制领域有着极为广泛的应用。
It also introduces a scheme of packet radio networks using the AX. 25 protocol and proposes a way to implement the hardware and software of the terminal node controller (TNC).
提出了基于AX.25协议构成分组无线网的方案，给出了基于AX . 25协议的终端结点控制器(tnc)的硬件和软件实现方法。
Implementation and design of communication controller and software of HDLC protocol are presented in this paper.
本文介绍HDLC通信控制器及HDLC规程软件的实现原理、方法和设计过程。
应用推荐