Graphics Simulation technology in NC machining is a powerful tool for validating NC machining programming, which using the computer graphical output to simulate the real machining process.
数控加工图形仿真技术利用计算机图形显示来模拟实际加工过程，是验证数控加工程序正确性的有力工具之一。
Take example for the transparency simulation, we discuss the design measure of graphics arithmetic and programming.
其中以“水下透明度”的实现为例，论述了图形学算法及程序设计方法。
By programming simulation, the single-grade and multi-grade circuits are analyzed, and it is the best moment for thyristor to switch on when the voltage of capacitor to be shorted is zero.
采用编程仿真的方式，对单级电路和多级电路分析后，提出了晶闸管开关最佳接入时刻为被短接电容电压为零时；
This paper is for advanced simulation developers engaged in the use of object-oriented programming languages and libraries that support object-oriented, discrete-event simulation.
本文主要介绍使用面向对象设计语言和库来进行高级模拟开发，这种语言和库支持面向对象的离散事件模拟。
The main work is to realize CAD parameterized mould-making and CAM mould machine programming, simulation and compiling post programme suitable for varied machine-centers of control systems.
主要工作目标：实现模具CAD参数化建模和模具CAM加工编程、仿真； 针对不同控制系统的加工中心完成后置处理程序编制；
This paper presents the simulation method and the circuit design of output signal for counting type fiber-optic gyro, and the realization circuit and software programming method of counter card.
本文研究了计数式光纤陀螺输出信号模拟的方法、电路设计及计数卡的具体实现电路和软件编程方法。
As for the software, the designing and simulation result of each sub-module of TC layer is analyzed, during the analysis process, some programming and optimization technique is expatiated.
其中，软件方面，着重分析了TC层的信元定界、解扰、测距等八个子模块的设计以及仿真结果，论述了TC层设计中采用的一些编程优化技术；
Based on the analysis of current NC automatic programming systems, a new method for the path control of five-axis linkage machine tools was proposed by means of simulation.
在分析了目前的数控加工自动编程系统后，提出了一种以仿真实现五轴联动机床轨迹控制的新方法。
Use stochastic simulation, create the plainness sequence of the stable stochastic road surface for the target road spectrums with programming, and use logistic test to verify.
采用随机模拟方法，通过编程产生目标路谱的平稳随机路面不平度序列，并通过数理检验进行验证。
The method integrates GIS, RS with pollutant loading receptor response model for reservoir water, agricultural non point source pollution simulation model and linear programming model.
该方法运用遥感数据，并以地理信息系统软件为平台集成了水库营养盐负荷浓度响应关系模型、农业非点源污染模拟模型和线性规划模型。
Based on WINDOWS system and applied visual programming technology, programming methods of computer simulation system for bench blasting are introduced.
介绍了基于WINDOWS平台、应用可视化编程技术的台阶爆破计算机模拟系统的编制方法。
The distribution of some field parameters such as the flux, the velocity, and the heat-transfer coefficient computed by the programming provided required conditions for cooling simulation.
最后通过程序实现计算出冷却水的流量场、速度场、换热系数场等的分布，为玻壳模具温度场的数值模拟提供了必需的边界条件。
An integrated system was founded through a combination of database, simulation and linear programming for selecting crops, cultivation strategies and machinery for a given farm.
将数据库、模拟及线性规划结合在一起，建立了一个同时选择农作物、作业方式及机器设备的软件系统。
The simulation of the sampling was carried out with C language programming, and the picture of locus for the data produced was analyzed with MATLAB. Experiment proves that this control algorithm is q…
用C语言编程进行抽样模拟，并用MATLAB对所获得的数据进行轨迹图分析，证明该控制算法是可行的。
Finally the interactive programming techniques suitable for algorithmic simulation are proposed based on the discussion of the advantages, disadvantages and the corresponding application fields.
同时分析了各种方法的优缺点和适用场合，提出了适合于算法仿真的交互编程方法。
It concludes that MATLAB is a powerful software for computer aided control System's design and analysis as well as System simulation and identification. The programming method is easy to learn.
结果表明，用MATLAB进行控制系统计算机辅助设计和计算、实现系统仿真极为简单方便，是进行计算机辅助设计和分析强有力的软件工具。
Using the improved annealing simulation algorithm, full, scale solution of optimal equation is obtained with flow chart for programming.
引入改进模拟退火算法进行全局最优化求解方程，并给出程序编制流程图。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
应用推荐