Principle, method and apparatus for young's modulus measurement of metallic material by indentation method are reviewed, and the methods error is analysed.
综述了无破坏法测定金属杨氏模量的测定原理、测定方法和测定仪器，并对这种测定方法进行了误差分析。
The paper presents the operating principle of MMIC test system measurement method and test programmer.
阐述了单片微波集成电路测试系统的工作原理、测试方法和自动测试程序。
An AC power converter that based on a novel mixed sampling method, the principle of the sampling power measurement, and the power measurement algorithm and its measurement errors are described.
提出了一种混合采样的交流功率转换器，叙述了该种采样功率测量的原理，推导了功率测量的算法和功率测量误差。
This paper describes the principle, method and apparatus for measurement of technical light attenuation length of plastic scintillators. The factors that influences this parameter are discussed.
本文报道了塑料闪烁体的技术光衰减长度的测量原理、方法和测量装置，并对影响此参数的因素进行了讨论；
The principle and method of high precise temperature measurement are introduced.
介绍了一种高精密温度测量的原理和方法。
In this paper, the principle, method and results of the earth stress measurement by hollow inclusion gauge at Renlou Coal Mine are introduced.
本文介绍了空心包体应力解除法的基本原理和方法，并利用其对任楼煤矿地应力进行了测量。
The experimental result indicates that this measure method is feasible on principle, and has directive meaning for realization of on-line measurement of foam on site.
实验结果表明，该检测方法在原理上是可行的，对于在现场实现溶渣泡沫高度的在线检测具有指导意义。
Introduce a relatively small typical capacitance measurement circuit and its basic principle, the use of digital signal processing technology to achieve small capacitance measurement method.
介绍了比较典型的微小电容测量电路及其基本原理，提出了采用数字信号处理技术实现微小电容的测量方法。
Plaster measurement system with laser transmission method and principle of double-sensors compensation were introduced.
介绍了膏药激光透射法测量系统及双传感器补偿法的测量原理。
The measurement principle and method of run out error by laser are introduced, and error is analyzed.
介绍了用激光测量跳动误差的测量原理、测量方法，并进行了误差分析。
The paper introduces the principle and method of high precise temperature measurement.
介绍了一种高精度温度测量的原理与方法。
First, the basic principle of the strain measurement with bonding resistance, theory of strain measurement, method and the relative signal disposition are introduced in the dissertation.
首先，介绍了电阻应变测量法的基本原理，应变测量的理论、方法以及相关的信号处理知识。
The experimental results show that this method is feasible on principle, and has directive meaning for realization of on-line measurement of the height of foaming slag on site.
在实验室进行了模拟检测实验结果表明，该检测方法在原理上是可行的，对于在现场实现熔渣泡沫高度的在线检测具有指导意义。
This paper describes the new method for a. c loss measurement in superconductor-The principle and device of double integration method and the result of measuring three samples.
本文描述了测量超导体的交流损耗的新方法——双积分方法的原理、装置和三个样品的测量结果。
The measuring principle and method for spectral atmosphere transmission by use of spectral radiation measurement instruments are given.
介绍了光谱辐射测量装置和测量大气光谱透过率的原理及方法。
Researches and analyzes ground environment characteristic and its influence on the work state of weapon system, provides the measurement principle, method and system.
分析研究了地面电磁环境特性及其对武器系统工作状态的影响，提出了地面电磁环境特性的测试原理、方法和系统。
The structure and working principle of the devices for melting point measurement by means of thin film comparative method of cryoscopy were introduced.
介绍凝固点下降薄层比较法测量熔点标准物质熔点的测量装置的构成与工作原理。
This paper briefly introduces the measuring principle of hysteresis loop, puts forward the new method based on SOC for measurement of hysteresis loop and the scheme of realizing it.
对磁滞回线的测量原理做了简单的介绍，提出了基于SOC(片上系统)实现磁滞回线测量的新方法及其具体实现方案。
The differences of principle and precision between frequency measurement method, cycle measure method, and equivalent precision frequency measurement method are compared.
分析、比较了测频率法、测周期法、等精度测频法等几种常用测频方法的原理及误差。
This paper describes the principle, equipments, method and results in the measurement of reflectance of black coating in the electrically calibrated conical cavity radiometer.
本文介绍电校准辐射计的锥腔形黑涂层反射比的测量原理、装置、方法以及测量结果。
In this paper, the principle of transit time correlation method and the constitution of measurement system are presented.
介绍了渡越时间相关测量方法的基本原理与测试系统组成。
This paper presents the plositioning method for the automatic measurement of the wheel workpiece and the principle of the postional device.
文章介绍了火车车轮毛坯自动测量时的定位方法以及自动定位装置的工作原理。
The principle of static and dynamic balance of precision rotating equipment is analyzed. The corresponding measurement method is brought forward.
对精密旋转设备的静、动平衡原理进行了深入分析，提出了相应的测量方法；
Methods: Adopting constitutional principle and measurement method of improved pelvic inclination surveyor, compared with other measurement methods of pelvic inclination.
方法：采用改良骨盆倾斜度测量器结构的原理和测量方法与其它测量方法进行比较性研究。
The components of internal resistance of VRLA battery and its measurement principle and method were analyzed.
分析了阀控式密封铅蓄电池内阻的组成及其测试原理和方法。
According to the principle of optical measurement, a simple and effective method to measure the distortion of CCD camera with a largefield, short focal length lens is presented.
从光学测量角度出发，结合计算机视觉中的摄像机标定方法，解决了大视场短焦距镜头CCD摄像系统的畸变校正问题。
Based on the principle of compound pendulum, the measurement method and corresponding equipment for the centroidal deviation and the rotary inertia of rocket projectile were described.
基于复摆原理，阐述了箭弹的质偏和转动惯量的测量方法及装置，推导出了质偏和转动惯量的计算公式。
This paper depicts the principle and technical keys of rapid and nondestructive measurement of subgrade compactness by the instantaneous impulsion method.
本文叙述了用瞬态冲击法快速、无损测定路基压实度的原理以及技术关键。
This paper depicts the principle and technical keys of rapid and nondestructive measurement of subgrade compactness by the instantaneous impulsion method.
本文叙述了用瞬态冲击法快速、无损测定路基压实度的原理以及技术关键。
应用推荐