For example, consider using Jazz source control and the Jazz build engine to power your continuous integration efforts.
例如，考虑使用源控制，以及Jazz构建引擎，来提高您的持续开发效率。
To describe the operating principle and control, this paper focuses on an example: a Z-source inverter for dc-ac power conversion needed in fuel cell applications.
以应用于燃料电池逆变功率变换的阻抗源逆变器为例，分析了其工作原理和控制方法。
The method of instantaneous value comparison for source current control of unity power factor rectifier possesses advantages of simplicity as well as valid restriction for maximum switching frequency.
在单位功率因数整流器中，利用瞬时值比较法来控制电源电流，不但控制简单，还可有效限制器件的最高开关频率。
Microcomputer controlled arc welding inverter power source can raises greatly controlled level of pulse MIG welding for its flexible control, high accuracy, high system response.
采用微机控制的弧焊逆变电源控制灵活、精度高、系统响应高的特点，能够极大提高脉冲MIG焊的控制水平。
The fuzzy control techniques for arc welding power source, seal tracking and arc welding quality is analyzed. The fuzzy logic application methods in arc welding process control is discussed.
分析了焊接电源、焊缝跟踪和焊接质量的模糊控制技术，探讨了模糊逻辑在弧焊过程控制的应用途径。
This paper proposes an energy saving control mode for current source inverter(CSI) induction motor drive system with the motor driving a constant power load.
本文提出了电流型逆变器-感应电动机变频调速系统中电机驱动恒功率负载时，系统以最大效率运行的节能控制方式。
This project is applied to the control circuit of the frequency converter power source of for measuring ground resistance in an electric substation.
此方案成功地应用于变电站接地电阻测量变频电源控制电路中。
A parameter control system for electroplating process based on power source was presented.
提出了一个基于电源装备的电镀工艺参数控制系统。
A new and practical power factor control strategy for three phase PWM current source rectifier was proposed.
提出了三相电流型PWM整流器的一种新型实用的功率因数控制方法。
Railroad signal power system is a special supply power source for train running. The high reliability is required. Thus, its supervisor and control become very important.
铁路信号电源系统是专门给列车运营信号供电的，其可靠性要求非常高，因此，对铁路信号电源的监视和控制十分重要。
This paper introduces the system of single phase large power source varied frequency for heating, contains rectifier, filter, inverter and control circuit etc.
介绍了大功率单相变频加热电源的系统组成，包括整流、滤波、逆变和控制电路等部分。
A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。
The power line medium used in many homes for home automation and control represents a unique source of information about the activity occurring in that home.
输电线用于许多家的媒介为家庭自动化和控制代表独特的信息源关于发生在那个家的活动的。
In this paper, the control system of IGBT inverter power source with microcomputer control for pulsed MIG welding is introduced.
介绍了自行设计开发的微机控制的脉冲MIG焊电源控制系统。
In this paper, the new power source for CO2 short circuiting transfer is researched which is based on the technology of microcomputer and wave control.
本文以波控技术为基本指导思想，应用微机技术，对CO_2焊短路过渡用电源加以研究。
A data acquisition system with the MCS-51 single-chip microcomputer control and a software for dynamic behavior detection of arc welding power source is described in this paper.
本文介绍了一种由MCS - 51系列单片机构成的数据采集系统以及用于电焊机动特性的测试软件。
The ideas of constructing of the control circuit of full-function controlled power source for arc welding are suggested in this paper, with their features analyzed.
提出了全功能弧焊电源控制电路的各类设计方案，分析了它们的特点；并提出了一种电源控制系统的电路设计方案；分析其基本工作原理和获得的各类电源输出外特性。
As the power source of the aircraft flight control system and landing gear loads, aircraft hydraulic system plays a key role for the safety of aircraft flying.
飞机液压系统作为飞机飞行控制系统和起落架等负载的动力源，对飞机的安全飞行起着关键的作用。
A microcomputer controlled IGBT inverter power source for pulsed MIG welding is developed. It realizes the self adaptive control and closed loop control of arc voltage in pulsed MIG welding process.
建立了微机控制和IGBT逆变式脉冲MIG焊电源系统，实现了MIG焊接过程弧压自适应闭环控制。
The basic work principle and structure, the concrete circuit, the control and the protection of the inverter power source were studied so as to provide a good basis for devel…
结果表明，该电源成功地进行了逆变，控制及其保护电路可以保证主电路正常工作，电源性能良好。
Through analyzing the principle of a parallel hybrid active power filter (HAPF) which is currently suitable for filtering high power harmonic source, a new control approach is proposed.
对现有的适合于大容量滤波场合的并联混合有源滤波器原理进行了分析。
Through analyzing the principle of a parallel hybrid active power filter (HAPF) which is currently suitable for filtering high power harmonic source, a new control approach is proposed.
对现有的适合于大容量滤波场合的并联混合有源滤波器原理进行了分析。
应用推荐