It combines optimized circuit protection and drive matched to low-loss IGBTs.
它结合了优化的电路保护和驱动器匹配低损耗igbt的。
Testing results show that the optimized circuit is superior to the original prototype in reading, writing distance, circuit size, and interference.
测试表明，优化后的电路在读写距离、电路尺寸、抗干扰性等方面都优于原样机。
With optimized circuit design and bump layout, high performance transmission lines for flip chip packages can be achieved using dry film as the masking material for the bump plating.
本实验显示经过最佳化的传输线路设计与凸块分布，低成本高效能的覆晶封装结构目标可以达成。
On the basis of test, EMI source in E1coaxial line is analyzed, different suppression techniques are compared and optimized filtering circuit is chosen.
在试验研究的基础上，对E1同轴传输线上电磁骚扰源进行了分析，测试比较不同的滤波抑制措施，确定了优化的抑制方案。
The optimized design of pipeline control unit is also proposed, which greatly minimizes the FSM states from 85 down to 23, with improvement in circuit speed and area utilizing.
其中，提出了流水线控制单元的优化设计，将控制状态机的状态数目从85个减少到23个，节省了电路面积，提高了速度。
The usable floor space is optimized by source sharing technique, and the reliability of design is improved by using synchronic circuit.
面积优化通过资源共享技术实现，并使用同步电路提高设计可靠性。
According to theory of optimized design, a practicable method on optimized design of circuit is proposed and can improve efficiency of optimized design.
根据优化设计理论，提出一种电路优化设计的实用方法，可以提高优化设计的效率。
The tool may generate fabrication masks for the given design that include mixed gate transistors with threshold voltages optimized to meet circuit design criteria.
该工具可以产生用于特定设计的制造掩模，该设计包括具有优化的阈值电压的混合栅极晶体管以符合电路设计标准。
The ripple of the output voltage is decreased remarkably and the dynamic performances of the circuit are improved obviously due to the pulse compensation circuit and the optimized voltage loop.
脉动补偿电路及优化的电压环使输出电压纹波显著减小，并改善了电路动态性能。
Results indi- cates that magnetic films with relatively higher resistivity and optimized magnetic circuit have to be considered in film inductor design.
结果表明选用较高电阻率的磁性薄膜和优化磁路设计，是薄膜电感器设计中必须考虑的问题。
In the design of moment device, new magnetic materials are used, the design of moment device is optimized, the magnetic intensity of magnetic circuit working is calculated.
在力矩器的设计中，采用了新的永磁、软磁材料，优化了力矩设计，计算了磁路工作磁场强度。
The circuit and anti _ interference technologies were optimized from the aspects of hardware and software.
该文从硬件、软件两方面介绍其优化电路和抗干扰技术。
Finally the optimized driving circuit is designed and experimented.
最后设计并测试了优化驱动电路。
Therefore, it is essential to study how to predigest actual circuit and achieve optimized design in VHDL.
因此，有必要深入讨论在VHDL设计设计、应用中如何简化实际电路，达到优化设计的要求。
Then, package structure, especially the signal transmitting path structure is optimized using 3d electromagnetic simulation and microwave circuit theory. Effect of package lid is also studied.
然后通过三维电磁场仿真，并结合微波电路理论对封装结构，特别是高频信号传输路径进行了优化设计，另外对盖板的效应进行了定性分析。
The AD9446 is a 16-bit, monolithic, sampling analog-to-digital converter (ADC) with an on-chip track-and-hold circuit. It is optimized for performance, small size, and ease of use.
AD 9446是一款16位单芯片采样模数转换器(adc)，内置一个片内采样保持电路，专门针对高性能、小尺寸和易用性进行了优化。
A new rhodium plating process applicable to printed circuit board was optimized by orthogonal test.
通过正交试验优选出一种用于印刷电路板的镀铑新工艺。
Advantages of Optimized Placement: Circuit Compaction and Power Reduction.
优化布线的优势：电路集成度高，能耗降低。
The over-molded package, holds together a samarium cobalt pellet, a pole piece and a true zero-speed Hall IC that has been optimized to the magnetic circuit.
在超模压封装，拥有一个共同钐钴颗粒，极片和一个真正的零速霍尔IC进行了优化的磁路。
And designs 3 differ single processing circuit, selects the directly coupling amplify single processing circuit for this sensor and optimized it for practicality.
设计了三种不同的信号处理电路，选择了直接耦合放大型信号处理电路作为锑化铟磁阻转速传感器的使用电路。
The interface circuit is optimized to remove most impacts of parasitic capacitances.
该接口电路进行了优化，以除去大多数的寄生电容的影响。
The device consists of a single-shot molded plastic package that includes a samarium cobalt pellet, a pole piece , and a Hall effect IC that has been optimized to the magnetic circuit.
该装置由一个单杆模压塑料封装，包括一个钐钴颗粒，一极片和霍尔效应集成电路已优化的磁路。
The magnetic circuit structure of actuator is designed by analysis method. The structure and parameters are analyzed and optimized by electromagnetic field FEM.
电磁结构设计中，采用电磁场解析计算进行初步设计，进而采用有限元法对致动器的结构和线圈参数进行进一步的分析与优化。
IBM-alliance researchers optimized the SRAM cell design and circuit layout to improve stability and developed several novel fabrication processes in order to make the new SRAM cell possible.
IBM联盟的研究人员优化了SRAM单元的设计和电路图，从而提升了稳定性，此外，为了制造新型SRAM单元，他们还开发出几种新的制作工艺流程。
The optimized magnetic circuit method is simple and accurate and a…
优化后的电磁轴承磁路法简单、准确，具有工程应用价值。
The optimized magnetic circuit method is simple and accurate and a…
优化后的电磁轴承磁路法简单、准确，具有工程应用价值。
应用推荐