Each node requires two addresses on the compute network: one for the compute address and another for the Baseboard Management Controller (BMC), which is used for hardware monitoring and power control.
每个节点在计算网络上需要两个地址:一个用于计算地址,另一个用于基板管理控制器(BMC),BMC用来进行硬件监视和电源控制。
In every node controller, there is a hypervisor running.
每个节点控制器中,都有管理程序运行。
Then the PEAR package must be uploaded onto the OmniFind controller node.
然后,必须将PEAR包上传到OmniFind控制器节点。
It queries node managers for information about resources, makes high level scheduling decisions, and implements them by making requests to cluster controller.
它向节点管理员询问资源信息,做出高级计划决策,并通过向集群控制器发出请求来实现。
The node controller module running on that node forwards it to the hypervisors.
节点上运行的节点控制器模块将它发送到管理程序。
The whole system regards supervise PC as the center, which joins the Field Bus by communication Controller. Every of the intelligent instruments directly connected with Field Bus as a node.
整个系统以管理计算机为核心,管理计算机通过总线控制器连接到总线,各智能仪表直接连接在现场总线上,作为现场总线的一个节点。
Controlled node controller for air filtration system based on IEEE802.15.4 standard.
基于IEEE802.15.4标准的用于空气过滤系统的受控节点控制器。
It also introduces a scheme of packet radio networks using the AX. 25 protocol and proposes a way to implement the hardware and software of the terminal node controller (TNC).
提出了基于AX.25协议构成分组无线网的方案,给出了基于AX . 25协议的终端结点控制器(tnc)的硬件和软件实现方法。
And it designs the CAN field bus node communication, the universal controller and the module of data gathering in details, and finally runs the system under the development environment.
同时主要对CAN总线节点的通信程序、家电通用控制器和数据采集模块进行了详细设计,并最终在开发环境下演示运行。
The intelligent node of using microchip AT89S51, CAN controller SJA1000 and the CAN transceiver are also developed.
同时还利用微处理器AT89S51、CAN控制器SJA1000和CAN收发器开发了智能节点。
Aiming at the volatility of demand in the supply chain, the feedback controller was used to maintain product inventory of each node, so that the supply chain reached stabilization.
针对在供应链中需求的多变性,应用反馈控制器来维持所有节点的产品库存,以此达到供应链的稳定。
A mobile network comprises remote base transceiver station (BTS) nodes (3, 4) linked with a central base station controller (BSC) node (9).
一种移动网络包括与中心基站控制器(BSC)节点(9)相链接的远程基站收发信机(BTS)节点(3,4)。
The intelligence node has been applied in diesel engine and generator controller of hybrid electrical vehicle and the need of powertrain controller has been met.
该智能节点已应用在混合动力柴油发电机组控制器中,满足了控制需要。
The central controller node could use a flow language to store the desired workflow sequences.
居中的控制器节点可以使用流程语言来保存期望的流程序列。
In the code in Listing 7, the callback method of the controller first generates the HTML fragment using the XSLProcessor module and then injects it into the targeted node.
在清单7所示的代码中,控制器的回调方法首先使用XSLProcessor模块生成HTML片段,然后将其注入到目标节点中。
In the design of this node, the network controller used the intelligent network interface controller OS81050, the encoder used CS4341, the amplifier used NE5532.
节点设计方案中,网络控制器采用智能网络接口控制器OS81050,解码器采用可控音量芯片CS4341,功率放大器采用NE5532。
In communications, a network topology in which each node is connected only to one central controller.
通信技术中的一种网络拓扑结构,其中每一网点只连接到一个中央控制器。
The intelligence node has been applied in powertrain controller of hybrid electrical vehicle and meets the need of powertrain controller.
该智能节点已应用在混合动力汽车总成控制器中,满足了总成控制需要。
CAN-bus for the control scheme and a node control loop are proposed. TMS320LF2407 DSP is used as the node controller.
采用TMS320 LF 2407 DSP作为节点控制器,设计了CAN总线结构中的节点控制回路。
The PSE typically includes a controller that controls the DC power provided to the PD at the second node of the communications link.
PSE通常包括控制 器,其控制提供给通信链路的第二节点上的PD的直流电。
In this paper, single bottleneck node network is considered. With two saturation factors, we make control rules, find optimal parameters and design the controller.
本文针对单瓶颈节点网络,考虑两个饱和非线性因素,制定控制规则,寻找优化参数,设计模糊控制器。
Network nodes have been developed based on CAN controller. Ability to resist bus interferences and time-trigger precision have been optimized in the node implementation.
基于现有CAN控制器开发了具有时间触发功能的通讯节点,并在设计中考虑了通讯干扰问题和时间触发精度问题。
This dissertation elaborated the basic principle and the technology standard of CAN bus, and designed a CAN node with AT89S52 micro-controller.
本文中论述了CAN总线的基本原理与技术规范;设计了以微控制器AT89S52为核心的CAN总线智能节点;
Through using 16-bit freescale MCU embedded CAN controller as master chip in each node, it achieved the design of hardware circuit, so realized CAN physical layer and CAN data link layer.
各个节点设计上采用内置CAN模块的飞思卡尔16位单片机作为主控芯片来搭建硬件电路,以实现CAN总线的物理层和数据链路层。
The smart node on CAN field-bus is the transmit or receive station of messages. It is mainly combined with micro-controller and programmable CAN controller.
CAN总线上的智能节点是网络上报文的接收和发送站,一般由单片机和可编程的CAN通信控制器组成。
Node 1 is the physical machine that includes the primary solidDB server and HA Controller.
Node1是包括主solidDB服务器和HAController的物理计算机。
The proposal based on USB Host/Slave controller chip CH375A, realized a USB-Host embedded in CAN bus data acquisition system and stored acquisition data of each node in U flash disk under MCU control.
该方案基于USB主/从控制芯片CH375A,在单片机的控制下,实现了CAN总线数据采集系统中嵌入USB主机,从而完成把各节点采集的数据存入U盘,取代了现场数据采集系统必须有一台计算机的模式。
The proposal based on USB Host/Slave controller chip CH375A, realized a USB-Host embedded in CAN bus data acquisition system and stored acquisition data of each node in U flash disk under MCU control.
该方案基于USB主/从控制芯片CH375A,在单片机的控制下,实现了CAN总线数据采集系统中嵌入USB主机,从而完成把各节点采集的数据存入U盘,取代了现场数据采集系统必须有一台计算机的模式。
应用推荐